User Guide DVP-370 z Before operating the unit, please read this manual thoroughly, and retain it for future reference z Due to the static, Miss-use, inferior product, your data could be damaged. z Handle with care when you use your valuable data. z Please back up your valuable data for safe work.
※ AivX has passed EMI testing for home use. 1. Before you begin AivX is a portable multimedia player. You may enjoy digital contents on TV without PC. AivX is able to directly connect to HD TV, Car TV, and projector and playback various audio and video files(Movie, Music, and Picture). It can be also used as USB 2.0 portable HDD storage device. 2. Main features 1. Multimedia player for Audio and Video contents without PC 2. USB2.0 external storage device 3. Analog 2ch stereo, digital 5.
2. If you want to use USB 2.0 product with full speed USB 2.0 speed (Max. 480Mbps), you should use PC with USB 2.0 Host Adaptor. 3. We recommend 3.5” HDD bigger than 40GBytes in capacity. 4. Be careful for shock hazard. 5. Do not expose high temperature or moisture. It may cause malfunction. Working temperature is recommended -10~60℃ 6. Keep in dry place. 5. Requirement ▷ Over 586 Pentium2 PC or MAC ▷ USB port should be available 6. Specifications Movie AVI(DivX 3.x/4.x/5.
7. Name of each part and function 7.1 Front side 1. Infrared Receiver: Receiving remote control signal. 2. Power (left) / HDD (right) LED: Indicates power status & HDD access. 3. POWER: Power ON/OFF switch. 4. FF/REW: Press the FF & REW buttons to select any point along the file length / Use to select the option from menu 5. UP/DOWN: Use to adjust subtitle position / Use to select the option from menu 6. OK: Press “OK” to start movie/ Use to move to the menu during movie playback 7.
6) RANDOM : LED will turn on when you set random playback. 7) REPEAT ( ): LED will turn on when you select repeat playback. 8) 16:9: LED will turn on when you set the screen type to 16:9. 9) DTS: LED will turn on when you play DTS file. 7.2 Back side 1. AC power : Input power using AC cord. ★Caution: When the device suddenly stopped working please turn on and turn off the power (or disconnect the power cord and reconnect it). 2.
7. Optical jack: Optical digital 5.1ch audio signal output. 8. Coaxial: Coaxial digital 5.1ch audio signal output. 9. USB port: For USB connection to PC. 10. Ext IR: Connect the external IR receiver (Option) 11. FM : Connect the FM Antenna (Option) 8. How to input HDD 1. Detach front case. 2. Detach Fixture. 3. Assemble HDD to fixture bottom using 4 screws. Caution: when you assemble HDD to fixture, make sure that direction is correct as shown below pictu re.
4. Connect POWER and IDE cable to HDD with Power cable. At this time, please make sure that red cable of No.40 ribbon cable would be No. 1 pin (please double check) 5. Slide in attached HDD and fixture to guide. 6. Close front case and screw 3 bolts with screw driver.
9. Connection to PC This is to use AivX as a portable Hard Disk Drive. You should disconnect the USB cable from AivX when you use AivX on your TV. Otherwise, it will not show the main menu on TV. 9.1 Windows ME/2000/XP AivX doesn’t need to setup drive to install on WinME/2000/XP OS. ⊙ Connection 1. Connect AC power cable. 2. Push “power ON/OFF” on the back side of AivX. 3. If you connect AivX to your PC using USB cable, new local drive will be created in “My Computer”. Now you may use the drive.
icon ( ) in task bar and click the left mouse button. 2. Select “Safely Remove USB Mass Storage Device” as shown below. 9.2 Windows 98/98SE You need to install a driver on Windows 98/98SE. ⊙ Driver Installation 1. Execute the “/Windows/USB/Setup.exe” from provided CD. 2. Press “next” on installation wizard. 3. Click “completion” from confirmation window. Now the Driver installation is completed. 4. Connect AC power cable. 5. Push “ON/OFF” switch on the back side of AivX. 6.
4. Turn on the power switch on rear side of DVP-370 and then turn on the power button on remote control or DVP-370. 5. Connect stereo audio cable (indicated by white & red) to audio input on TV.
10.2 Using Composite video and 5.1ch sound. 1. Connect AC power cable to an outlet. 2. Connect composite video cable (indicated by yellow) to video input on your TV. (Do not connect two sound cables) 3. Connect 5.1ch audio receiver to AivX using coaxial cable (or optical cable) to enjoy full surround sound. Caution: To hear the DTS sound you should connect 5.1ch receiver or decoder to AivX. 4. Turn on your TV and it to video input mode. 5.
10.3 Using composite video and FM stereo sound(option) You can hear the sound from FM radio by tuning FM frequency. You can select FM frequency from the following options. 88.1 / 88.5 / 88.9 MHz (“88.9MHz” is selected as default) 1. Connect composite video cable (indicated by yellow) to video input on TV. 2. Connect AC power cable to an outlet 3. Connect provided antenna to FM transmitter jack on AivX. 4. Turn on your TV and set it to video input mode. 5.
3. Turn on your TV and set it to “S-video” mode. 4. Turn on the power switch on rear side of DVP-370 and then turn on the power button on remote control or DVP-370. 5. Connect stereo audio cable (indicated by white & red) to audio input on TV. (Do not connect composite video cable.) 10.5 Using Component video and stereo sound When you connect AivX to HDTV, please use provided component cable. 1. Connect AC power cable to an outlet 2. Connect AivX to HDTV using component cable.
10.6 Using Component video and 5.1ch sound When you connect AivX to HDTV, please use provided component cable. 1. Connect AC power cable to an outlet. 2. Connect AivX to HDTV using component cable. Connect component cable (indicated by red & green & blue) to component video input on TV. 3. Connect AivX to 5.1ch receiver (or decoder) using coaxial (or optical) cable. Caution: To hear the DTS sound you should connect 5.1ch receiver (or decoder) to AivX. 4. Turn on your TV and set it to “Component”. 5.
10.7 Using Component video and FM stereo sound(option) You can select radio FM frequency from the following options; 88.1 / 88.5 / 88.9 MHz (88.9MHz is selected as default) 1. Connect component cable to TV as shown below. 2. Connect AC power cable to an outlet 3. Turn on your TV and set it to “Component” mode. 4. Turn on the power switch on rear side of DVP-370 and then turn on the power button on remote control or DVP-370. 5. Connect provided antenna to FM transmitter jack. 6.
10.8 Audio hearing through FM radio(option) If you want to hear music in your car, you can hear the sound from FM radio. You can select radio FM frequency from the following options; 88.1 / 88.5 / 88.9 MHz (“88.9MHz” is selected as default) 1. Connect provided antenna to FM transmitter jack. 2. After raising AivX volume, you should adjust radio sound volume. (If it makes noise, you should adjust AivX volume) 10.9 How to connect AivX to portable Car TV or In-Dash TV.
3. Connect car power adaptor to AivX. Then red and green LED will blink. After 10 seconds green LED will turn off and red LED will stay on. 4. Turn on the power switch on rear side of DVP-370 and then turn on the power button on remote control or DVP-370. 5. Turn on your Car TV and set it to “AV” mode. 6. Press “T/O” button on remote control in order to fix suitable TV-Out.
1.
2. Watching Movie/Music/Photo ★ Language is set as “English “when the unit was shipped by factory. 12.1 Using file and menu while playing (Movie/Music/Photo) ⊙ Go to [File Browser] screen 1. Press “MENU” key. 2. Using “▲,▼”key and move to [File Browser ]. 3. Press “OK”key to select. ⊙ Playback movie files 1. AT [File Browser] screen, using “◀,▶” key to select a target among [Movie]/[Music]/[Photo]/[all]. If you select “all”, you may see all the files. 2. Select a file using “▲,▼”key. 3.
5. Press”OK”key to apply. (Recover selected item color) 6. Press “MENU”key again and then menu screen go end. ⊙ Use “Zoom” function at the file browser Font is enlarged when “zoom” key is selected on the remote control. once the “zoon” key is selected, the font size is changed ⊙ Jump files at the file browser To go next page, press "▶▶▌,▌◀◀ " button at the file browser ⊙ DVD file is supported(ISO, IFO, VOB) ISO file format from ripping DVD is supported at the file browser in movie.
Be able to modify brightness, color, and contrast. ⊙ X 4/8/16/32 multispeed at movie file While "FF/REW", you can select the speed when you playback the movie file. Press "Left/Right" button in order to control the speed.(4X, 8X, 16X, 32X) All of Mpeg file is not supported upon the codec. ⊙ Convenient key function BOOKMARK This function is to memorize present file location. In case of re-start or go to other menu, you may use this bookmark function.
- Press “0” to change the audio. (Same with function in “S/T”) 12.3 Listening Music Please refer to below screen to select music file. Select the file using “▲, ▼” key and press to play using, “▶▌▌”or press”OK” key. ⊙ How to set-up back ground image per music file When music file play, it is possible to set-up background image that the music folder contains the same name jpg file. You may use the JPG file as a background image. If the same name image file does not exist but have /mymusic/background.
⊙ File Searching on listening to music(support 2.06 version) - Push “MENU” key during listen to music then you can see the file browser menu. - “MUSIC” key is not available at this time. - To stop to this function, push “MENU” key then push “STOP” key. - Available key is as below on searching. ¾ MENU : close the window then return to the menu.
⊙ MP3, WMA, OGG, WAV playback information is supplied(support 2.06 version) - Bitrate, Sampling frequency, total playback time is supplied on listening to music. - Push “INFO” key to see the information. - OGG playback time information may different with the real time ** In WAV, file information marks only total playtime, bit rate and sampling frequency ⊙ Photo slide show is supplied on playback the music (support 2.06 version) - Photo slide show is available on listening to music.
- When define the photo folder to slide show, then Push “MENU” key to close the window. Push “picture” key to start slide show To stop the slide show, push “Picture” key once more. To start again, push “Picture” key again. * Sliding time is set at the photo. You can push “picture” key at photo then you can set the sliding interval time. * To disappear the file information from the screen, push “S/T” key twice. If you want to see the song information again, push “S/T” once more, then they are shown up.
12.4 Watching photo Please refer to below screen to select Photo file. ⊙ Menu explanation while playing File information: Indicate present playing file information such as playing time and total playing time. Screen size Be able to maximize or minimize screen. Screen setting Be able to modify brightness, color, and contrast. Slide Be able to set sliding time by 1,3,5,7,9 sec. Screen rotating Screen rotating 90,180, degree. Slide Function Slide time interval make set 1,3,5,7,9 secs.
7. Hot key: Use “0” to stop/start picture slide show. 12.5 How to use Play List (Only movie file is possible) ⊙ Go to [Play List] screen 1. Press “MENU” key or “▲, ▼” key. 2. Move to [Play List] using “▲, ▼” key. 3. Select using press “OK”key. ⊙ Play 1. Select [Play/order] from [Play List]screen using “◀,▶” key. 2. Select and press movie file using “▲, ▼” key. 3. To play, press “▶▌▌”or “OK”key. ⊙ Changing Play order 1. At [Play List] screen, select [Play/order] using “◀, ▶”key. 2.
2. Select additional file to add on Play List using “▲, ▼” key. 3. Press “OK”key to add on to Play List (check mark). And Press “ok” again and then Play List will be deleted. ⊙ Delete 1. Select [Remove] from [Play List] using “◀, ▶”key. 2. Select delete file from Play List using “▲, ▼” key. 3. To execute press “OK”key.
3. System setup 13.1 How to set up the list 1. Press “MENU” key or “◀, ▶” key. 2. Move to [system setup] menu using “▲, ▼”key. 3. Press “OK” key to select [system setup] 4. Press “◀, ▶” key to select a menu among [video]/[audio]/[subtitle]/[system]. 5. Press “▲, ▼”key to select detailed setup list.. 6. Press “OK”key to check or not check upon clicking. 12.6 Video setup ⊙ HDTV, TV Form This category is to select what kind of TV.
12.7 Audio setup ⊙ Audio output You may select either analog 2ch (stereo) or digital 5.1ch. ⊙ 2(Dual) Audio output at AVI file. Once you select “0” key on playback avi file. Then the audio is changed when the file format is set dual audio. ⊙ FM transmission (Option) Set up to listen sound through FM radio. If you use FM transmission, you should choose one channel out of four as above 87.7MHz(Disable in U.S.A) 12.
Be able to select hide or display caption. ⊙ Caption language Select one caption as you wish. 12.9 System setup ⊙ Initialization System initialization function used as initializing a factory output. ⊙ Language Select language to use. ★Caution: Language is set as “English “when the unit was shipped by factory. Please select language as you wish. ⊙ Firmware upgrade Using for firmware upgrade. “A new firmware version ”indicate version “/update/update.bin”of HDD.
9. Press “▲, ▼” key to move to “start” item of firmware upgrade 10. Press “OK”key then you will see reconfirm message 11. Press “▲, ▼”and move to “yes”, and press “OK”then start firmware upgrade will be processed. If you want to firmware upgrade cancel then in “No” location press “OK” key. ★Caution: Do not turn off while firmware upgrade. It may cause serious system malfunction. 12. Automatically power off after completion of firmware upgrade. 13. Power on using “POWER” of remote control.