User Manual DVP-260 - Before using the product, read carefully the user manual first. - Carefully read the warning notes and use the product properly. - Pictures in the user manual are for reference and can be different from the actual product. - This user manual can be revised for upgrade without prior notice. Sarotech Co., Ltd.
---- Contents ---- - Safety Warnings --- 4 - Application Warnings --- 5 1. Introduction --- 6 2. Main Features --- 6 3. Product Components --- 7 4. User Environment --- 7 5. Product Specifications --- 8 6. Name and Title of Each Part --- 9 6-1. Front --- 9 6-2. Rear Terminal --- 10 7. Method of Hard Disk Mountings --- 11 8. Connection to PC --- 14 8-1. Hard Disk FDISK and Format --- 14 8-2. During the use of Windows ME/2000/2003/XP --- 14 ■ Connecting ■ Release of Connection 8-3.
9. Connection to Video/Audio Equipment --- 16 9-1. Connection of Video Cable --- 16 9-2. Connection of Audio Cable --- 18 9-3. Connection to TV in Stationary or Inslide Vehicles --- 19 10. Usage of Remote Control --- 22 11. Viewing MOVIE/MUSIC/PHOTO --- 23 11-1. File Browser --- 23 11-2. File Play (MOVIE/MUSIC/PHOTO) --- 24 11-3. Watching Movie --- 24 ■ Menu during Movie Play ■ Convenient features for watching Movie 11-4.
※ User Information B Class Equipment(Equipment for home use) : This apparatus is for home use and has a radio wave acceptability registration, so it can be used in all areas. Safety Warnings Before using the product, read carefully the user manual first and use the product safely. - Users may not arbitrarily disassemble or rebuild the product. This may damage the product. - Do not disassemble the product while the power code is on. This may cause electric shock or fire.
Application Warnings Before using the product, read carefully the user manual first and use the product properly. - Data in the hard disk can be damaged due to static electricity, awkward usage or defective products. Therefore, please pay close attention in handling the product. Always back up important data. Especially, be careful of losing the data as manufacturers have no responsibility on such damage.
1. Introduction DVP-260(hereinafter referred to as ‘abigs’) is a new concept of multimedia player equipment that connects digital contents (movie, music, photo, etc.) files to external display equipment (household TV, automobile TV, projector (external video supported), etc.) without a PC. Therefore, users with abigs can enjoy digital contents from video file, music file and picture file. Users can also conveniently use abigs as an USB 2.0 external storage in connection with the PC. 2.
3. Product Components 1) abigs 2) Remote control (battery included) 3) AV cable (composite video, stereo sound) 4) S-Video cable 5) Component cable 6) DC adapter (DC +5V, 2A) 7) USB cable 8) User manual 9) Fixed bolt 10) CD (driver installation) 11) Coaxial adapter 12) Product stand * Please check the components after purchasing the product. Components can be changed according to their features.
5. Product Specifications Support file format Main chip set Video output Audio output FM transmission output HDD Type File format system Movie AVI(Divx 3.x/4.x/5.x, Xvid), ISO, IFO, DAT, MPG, VOB Music MP3, OGG Vorbis, WMA, AC3, PCM(WAV) Picture JPEG Subtitle SMI, SRT, SUB EM8511 (sigma design) Composite S-Video HD Component (Progressive output support: 480i, 480p, 576i, 720p, 1080i) Analogue 2ch Digital audio output (Optical/Coaxial) (DTS pass though) Usable frequency: 88.1/88.5/88.
6. Name and Title of Each Part 6-1. Front 1. POWER LED: If users press the “I/O” switch from the main frame, power will be supplied and the power lamp will be lightened up. 2. HDD LED: The hard disk lamp will lightened up when the hard disk activates. 3. NTSC LED: It will be lightened up when the TV method is set as NTSC state. 4. PAL LED: It will be lightened up when the TV method is set as PAL state. 5. PLAY LED: It will be lightened up when the movie, music or picture is played. 6.
6-2. Rear Terminal 1. POWER TERMINAL: This is a terminal that inputs DC +5V. 2A power. (Dedicated AC power adapter or dedicated vehicle power adapter is used.) * Warnings Press the “I/O” button with the power on. If the remote control doesn’t activate during play time or the system goes out of service, turn off the power with the “I/O” switch (if users press the switch for two seconds, the power will be turned off after three seconds.
7. Method of Hard Disk Mountings 1. Remove the screw from the bottom in the arrow direction. 2. Push the bottom case to the side in the arrow direction. 3. Separate the bottom case upwards in the arrow direction.
4. Separate the hard fixed fixture upwards in the arrow direction. 5. Connect the hard disk to the 44 pin connector in the arrow direction. Assemble the hard disk and connector based on No. 1 pin. * Warnings The 4 remaining pins on the left of the hard disk is for setting Master/Slave. Therefore, these are not connected to the product. 6. Assemble the hard fixed fixture to the combined hard disk and product as shown.
7. Assemble the upper case in the direction as shown. 8. Assemble the separated screw as shown. 9. The mounting of hard disk is completed.
8. Connection to PC The following teaches how to connect abigs to external storage equipment and use it. Consider watching a movie in connection with the external TV while abigs is activating. If users connect the USB cable, it will activate as external storage equipment. As a result, users cannot see the screen from the external TV. If users want to end the use of external storage equipment and watch the movie again, turn off the power, remove the USB cable and turn on the power again.
2. In case of connection PC and abigs with a USB cable, a new driver will automatically be created in [My Computer]. Now, users can read or use various files or folders in this drive. ■ Release of Connection Press the USB connection icon ( )at the right side and bottom of the Windows program with the mouse left button and select “drive removal”. After the process has successfully taken place, a message allowing the separation pops up. Users can then separate PC and abigs. 8-3.
9. Connection to Video/Audio Equipment The following teaches how to use the abigs by connecting it to external video/audio equipment. Users can watch and listen to both video and sound only after connecting the video cable (refer to 9-1) and the audio cable (refer to 9-2). 9-1. Connection of Video Cable Connect the product to the TV(composite terminal, component terminal, S-Video terminal). If users want to watch the video, connect the provided video cable as shown in picture 1.
1) Connect the power 2) Connect the provided video cable to the abigs and TV. ① Connection of composite video Connect the product to the composite video terminal of TV. If users want to watch movie, connect the AV terminal of abigs and the composite terminal (yellow terminal) of TV as shown in ① of picture 1. ② Connection of component video Connect the product to the component terminal of TV.
9-2. Connection of Audio Cable abigs supports the analogue audio output (composite cable audio signal), digital audio output (Coaxial/Optical) and FM audio output (FM antenna). To watch the video, users should connect the video cable (refer to 9-1). Picture 2 1) Connect the power. 2) Connect the audio cable to the TV or audio equipment. * Reference Users should pay extra for the optical/coaxial cable besides the basic components.
② Through FM radio If users want to listen to the audio through FM radio, basic frequencies for FM sending features are 88.1/88.5/88.9MHz, which are forward as 88.9MHz from the factory. * Warnings Raise the abigs sound output properly to the mid level and control the radio volume. If the tone is distorted, control the abigs sound output value. ③ Connection of digital audio coaxial cable The following is the method of connecting the abigs to the digital audio coaxial input of external audio equipment.
Picture 3 ※ Warnings 1. Users must have the cable provided by the TV manufacturer when connecting to stationary or inslide vehicle. If the user lost the cable, purchase one from the TV manufacturer or purchasing place. 2. If the user has an external AV terminal for stationary or inslide TV, follow the below procedures. However, if the user doesn’t have an external AC terminal, purchase one from the TV manufacturer or purchasing place. 3. Some genuine products don’t have an external AV input terminal.
* Reference Users can listen to the abigs audio signals through the vehicle amp in connection with the car pack. 4) Supply power by connecting the vehicle adapter to the abigs. 5) Press the “I/O”switch from the main frame or “Power” button from the remote control.
10. Usage of Remote Control * Reference Refer to the 11.
11. Viewing MOVIE/MUSIC/PHOTO * Reference Part of the features or method of usage can be different according to the firmware version. 11-1. File Browser 1. The file name is clearly displayed from the [File Browser] and [Play List]. If you press the “ZOOM” button from the remote control on the [File Browser] and [Play List], the letter size will change as shown. 2.
11-2. File Play (Movie/Music/Photo) Press the “▲,▼” button to move to [File Browser]. Press the “OK” button for selection. Press the “◀,▶” button from the [File Browser] screen to move to the [Movie]/[Music]/[Photo]/[Listall] items. Only the relevant files of the selected item are displayed on the screen. If the user selects the [Listall] item, all files are displayed. Press the “▲,▼” button to select the play file. Press the “▶▌▌” or “OK” button to play movie, music or picture.
■ Convenient features for watching Movie 1. BOOKMARK This feature stores the current location being played. Users can use the bookmark feature when they are turning off and on the power or working on other menus and returning to the move they were previously watching. -Registration: Press the “B/M” button at the required location during file play time. The last registered location is only remembered. -Play: Press the “B/M” button when the file is not played.
6. Double Speed Play Whenever pressing “◀”,“▶” buttons from the remote control while playing AVI files, the double speed play will take place with the indications of high-speed play 4, high-speed play 8, high-speed play 16, high-speed play 32, high-speed backward play 4, high-speed backward play 8, high-speed backward play 16 and high-speed backward play 32”. 7. ISO File Play Features Users can play the ISO file of DVD format. Select the file with the iso extension from the [Movie] menu of [File Browser].
press the “MUSIC” button after the power lamp is on the main frame and the NTSC(PAL) LED is lightened up, the entire music file in “/mymusic” folder of the hard disk will be played. Users can create a “mymusic” folder in the hard disk root folder and store music files. 2. File Search during Music Play If users press the “MENU” button during play time, the screen for file search appears. Users cannot use this feature with the “MUSIC” button during play time. Press the MENU button to close the search window.
7. Movement of Sub-Folder Unit in “mymusic” Folder Turn the power on. If users press “◀”,“▶” buttons with the “MUSIC” button during music play time, the music files in the sub-folder of mymusic folder will be played. Users press the “◀”button to move to the previous folder, and the “▶” button to move to the next folder. Folders are moved from “mymusic” folder to the next sub-folders in order.
11-6. Usage of Play List Press the “MENU” button or the “◀, ▶” button. Use the “▲, ▼” button to move to the [Play List]. Press the “OK” button for selection. Press the “◀, ▶” button from the [Play List] screen and select the [Play Order]. Press the “▲, ▼” button to select the movie file. Press the “▶▌▌” button to play the movie. * Reference Users can only use the play list feature for movie files. ■ PLAY LIST Press the “◀, ▶” button from the[Play List] screen to select the [Play List ].
■ REMOVE Press the “◀, ▶” button from the [Play List] screen to select the [REMOVE]. Press the “▲, ▼” button to select the file that the user wants to delete from the play list. Press the “OK” button to delete the file from the play list. 12. System Setup * Reference - Some setting items can be different according to the firmware version. - Support features can be different according to the product model. Please use the product after checking its specifications. Press the “MENU” or “◀, ▶” button.
* Warnings This item doesn’t appear on the screen if it is wrongly set. In this case, slowly press the “T/O(TV OUT)” button from the remote control for several times until the normal screen appears. The TV out Format will automatically be changed before output. 2. Screen Type Users can select the “Screen Type” to see the video in letter box or pan & scan format. 12-2. Audio Setup 1. Audio Output Users can select one between analogue 2ch (stereo) and digital 5.1ch method. 2.
1. CAPTION Setup Users can select Caption on / off 2. Caption language If there are two Captions, users can select one of them. 12-4. System Setup 1. SETUP DEFAULT This feature is used to initialize the system into the factory version. 2. MENU LANGUAGE This feature is used to select the language from the menu. 3. Firmware Upgrade This feature is used to upgrade the firmware. “Upgrade Firmware Version” indicates the “/update/update.bin” file version in the hard disk.
4) Remove the abigs from the PC and turn on the power by connecting the abigs to the TV. 5) Move to the [SYSTEM SETUP]/[System] screen and press the “▲, ▼” button and the “OK” button from the “Start the Firmware Upgrade” item. 6) Press the “▲, ▼” button from the reconfirm message window and move to the “Yes” location. Press the “OK” button to see the window for upgrade. The firmware upgrade will begin. If users want to cancel the firmware upgrade, press the “OK” button from the “No” location.
13. Before Service Request Read the following matters before making a request for service. Please contact the customer service center if necessary. 1. Hard disk is not being read. Check the hard disk cable and the jumper (Master, Slave) setting. If the operation system is windows 98, users must install a separate driver. In case of using a new hard disk, users must create a format with the partition. Please refer to “HARD DISK FDISK and FORMAT” in User Manual, 8-1. 2. Video file is not being played.
Guidance for Customer Registration Thank you for using our company’s product. To fully reflect precious opinions from customers and offer improved products, perfect technical support and A/S, we have prepared a registration column for online customers. ■ Registration method: Log on the abigs website (http://www.sarotech.com) and click ‘Customer Registration’ at the upper right side of the main screen. After preparing the online customer registration card, you will become a member of our company.
- If the product was broke down because of the customer’s careless handling, repairing or reconstructing - If the product was broke down because of the repair by a third person other than the salesperson or service center deliveryman - If the product was broke down or damaged because the customer dropped the installed product while moving - If the product was broke down because the power outlet had a problem or the connector were defective - If the product was broke down because of natural disaster (fire, d