User's Manual

Sarotech
USB Bridge Adaptor(BA-01U) User’s Manual
*. The BA-01U is USB Bridge Adaptor , which shall be connected between a USB
port on a personal computer and another external device for data transmission.
I. Features
-. 12Mbps Data Transfer
-. USB 1.0 and 1.1
-. Hot Plugging, Plug & Play
II. H/W & S/W Requirements
-. Window 98/ME, Windows 2000, Mac OS 8.6 or higher
-. CPU : Pentium MMX 200MHz or higher
-. RAM : 32MHz or higher
III. Package Contents
-. BA-01U Bridge Adaptor
-. User’s Manual
-. Install Driver Diskette
IV. Installation
1. For Windows 98 Users
 Insert provided install diskette into the FDD.
 On the window, you’ll find “win98”folder.
 Double click setup file of the “win98”folder and then the driver will be installed
automatically.
2. For Windows 2000 Users
 Boot up system(Windows ME) and Plug the BA-01U into USB port on your PC.
 <CD-ROM/CD-RW,HDD etc.> USB Device will appear on the window.
 And the drive will be appeared in the “MY COMPUTER”

CAUTION
: Do not install by file of the WIN98 directory into the diskette.
-. The file<usbntmap.sys etc.> may be requested, In this case you can use base2.cab of
the WIN9X folder into the Windows ME CD.
3. For Windows 2000 Users
 Boot up system(Windows ME) and Plug the BA-01U into USB port on your PC.
 <CD-ROM/CD-RW,HDD etc.> USB Device will appear on the window.
 And the drive will be appeared in the “MY COMPUTER”
LABELLING REQUIREMENTS
Τηισ δεϖιχε χοµπλιεσ ωιτη Παρτ 15 οφ τηε ΦΧΧ Ρυλεσ. Οπερατιον ισ συβϕεχτ το τηε
φολλοωινγ τωο χονδιτιονσ: (1) τηισ δεϖιχε µαψ νοτ χαυσε ηαρµφυλ ιντερφερενχε, ανδ (2) τηισ
δεϖιχε µυστ αχχεπτ ανψ ιντερφερενχε ρεχειϖεδ, ινχλυδινγ ιντερφερενχε τηατ µαψ χαυσε
υνδεσιρεδ οπερατιονσ.
INFORMATION TO THE USER