User's Manual

ManualsBrandsSapling ManualsElectronicsSTR 2000 / STR 1000

STR 2000 Series Transceiver Installation Manual

Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: (215) 322-6063 Fax: (215) 322-8498 www.Sapling-Inc.com

MOUNTING

Mounting Diagram………………………………………………………………………… Page 2

WIRING INFORMATION

Wiring Information……………………………………………………………………….. Page 3

INTERFACING

59 Minute Correction.……………………………………………………………………. Page 4

58 Minute Correction……………………………………………………………………… Page 4

National Time and Rauland………………………………………………………………. Page 5

Rauland Digital……………………………………………………………………………. Page 5

Dukane……………………………………………………………………………………. Page 6

Once A Day Pulse………………………………………………………………………… Page 6

RS232 and TCP/IP………………………………………………………………………… Page 7

PROGRAMMABLE RELAY

Programmable Relay Wiring………………………………………..…………………….. Page 8

FREQUENTLY ASKED QUESTIONS

STR 2000 Frequently Asked Questions...………………………………………………… Page 9

TROUBLESHOOTING

STR 2000 Troubleshooting……………………………………………………………….. Page 10

Page 1

Table of Contents

FOR SYSTEM WIRING DIAGRAMS, PLEASE REFER TO SYSTEM INFORMATION

Summary of content (12 pages)

PAGE 1
STR 2000 Series Transceiver Installation Manual Table of Contents MOUNTING Mounting Diagram………………………………………………………………………… Page 2 WIRING INFORMATION Wiring Information……………………………………………………………………….. Page 3 INTERFACING 59 Minute Correction.……………………………………………………………………. Page 4 58 Minute Correction……………………………………………………………………… Page 4 National Time and Rauland………………………………………………………………. Page 5 Rauland Digital……………………………………………………………………………. Page 5 Dukane…………………………………………………………………………………….
PAGE 2
STR 2000 Series Transceiver Installation Manual Mounting Diagram INSTRUCTIONS 1. Find a location that will allow the Transceiver to transmit the signal in open space. (hallway recommended) 2. Run the wiring through the knockouts and connect according to the wiring information. 3. Tighten all four (4) screws (6-32) on the front panel. 4. Line up the Transceiver in the desired mounting location and mark the holes. 5. Mount anchors (not included) to where the holes were marked at in the previous step. 6.
PAGE 3
STR 2000 Series Transceiver Installation Manual Wiring Information Page 3 Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: (215) 322-6063 Fax: (215) 322-8498 www.Sapling-Inc.
PAGE 4
STR 2000 Series Transceiver Installation Manual Interfacing With Other Systems 59 Minute Correction 58 Minute Correction Page 4 Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: (215) 322-6063 Fax: (215) 322-8498 www.Sapling-Inc.
PAGE 5
STR 2000 Series Transceiver Installation Manual Interfacing With Other Systems National Time and Rauland Rauland Digital Page 5 Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: (215) 322-6063 Fax: (215) 322-8498 www.Sapling-Inc.
PAGE 6
STR 2000 Series Transceiver Installation Manual Interfacing With Other Systems Dukane Once A Day Pulse Page 6 Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: (215) 322-6063 Fax: (215) 322-8498 www.Sapling-Inc.
PAGE 7
STR 2000 Series Transceiver Installation Manual RS232 Input and Output RS232 RS232 Ground Output Input 16 17 18 TCP/IP LAN Connection STR 2000 TCP/IP LAN Connector TCP/IP LAN Connection To Internet Page 7 Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: (215) 322-6063 Fax: (215) 322-8498 www.Sapling-Inc.
PAGE 8
STR 2000 Series Transceiver Installation Manual Programmable Relay 4 5 N.O. COMMON 6 N.C. *For instructions on programming the relay, refer to the STR 2000 Programming Manual. Page 8 Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: (215) 322-6063 Fax: (215) 322-8498 www.Sapling-Inc.
PAGE 9
STR 2000 Series Transceiver Installation Manual Frequently Asked Questions Where is the best location for the Transceiver to be mounted? Usually, the hallway is the best location because it is mostly open space in typical applications. How far can the Transceiver transmit the wireless signal? The Transceiver can transmit up to 1000 meters in open space.
PAGE 10
STR 2000 Series Transceiver Installation Manual Troubleshooting The clocks aren’t receiving the signal. What should I do? Make sure that the Transceiver is in a place where the signal can be transmitted in open space. I can’t get my Transceiver to synchronize with the Internet. What should I do? Check your connection between the ends of the CAT 5 cable. Make sure the pin configuration is correct. Also, make sure the Internet connection is enabled in programming.
PAGE 11
STR 2000 Series Transceiver Installation Manual FCC Wants You to Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
PAGE 12