User Manual April 2012 914-928 MHz Frequency Hopping Transceiver Module Model: PCB-HPWR-900-1 FCC ID: R73HPB1
Introduction: This module is only authorized to be installed in fixed mount installation and may not be installed in a mobile or portable device. The HPWR-900-1 RF module is to be used in Sapling Master Clocks such as the SMA-3000 or Repeater SMA-1000 and equivalent models. The module is only to be connected to other Sapling products. Specifications: The maximum output power will be 30 dBm. The transmit cycle is a sequence of 57 data strings on 51 different frequencies, each transmitted for 10 msec.
HPWR 900-1 P2 P2 PROGRAMMING CONNECTOR PIN 1 TDO/TDI PIN 2 3.3 VOLTS PIN 3 TDI PIN 4 3.3 VOLTS PIN 5 TMS PIN 6 NO CONNECTION PIN 7 TCLK PIN 8 TEST PIN 9 GROUND PIN 10 NO CONNECTION PIN 11 RST PIN 12 TXD PIN 13 SHIELD PIN 14 RXD * PIN 1 IS SQUARE PAD HPWR-900-1 RF module as a remote antenna, to be connected to a Sapling Master Clock.
Operation: The module is controlled by the Master Clock and will not operate on its own. When connected to a Master Clock as a main transmitter, it will transmit the time for 570 ms, as specified, once a minute. If used as a Repeater, it will receive time from a main transmitter or clock and re-transmit the time thereby increasing the coverage area, thus keeping all the slave clocks synchronized to the Master Clock. FCC Statement: This device complies with part 15 of the FCC Rules.