RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 INSTRUCTION MANUAL DTL-4800 Real Time Video Cassette Recorder English Magnétoscope en temps réel Français Videograbador en tiempo real Español DIGITAL Please read this manual and accompanying “IMPORTANT SAFETY INSTRUCTIONS” sheet carefully before connecting your VCR and operating it for the first time. Be sure to read carefully and follow all the PRECAUTIONS on page 1 and 2. Keep the manual in a safe place for future reference.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 PRECAUTIONS Location About this VCR operation (block recording) For safe operation and satisfactory performance of your VCR, keep the following in mind when selecting a place for its installation: This VCR is equipped with a memory function that, while recording (or playback), will first store the pictures in the internal memory before it actually records them to tape (or outputs them to the screen).
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 CONTENTS FEATURES œ œ œ œ PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LOCATIONS OF CONTROLS AND INDICATORS . . . . . 4 œ CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ON-SCREEN MENUS . . . . . . . . . . . . . . . . . . . . . . . . . .
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 LOCATIONS OF CONTROLS AND INDICATORS Front Panel 12 3 4 56 7 8 9 h STILL/PAUSE POWER REPEAT f REW a a REC b STOP UT S ON SCREEN OFF ON MENU RESET TIMER REC/PLAY SPEED MENU EXIT j COUNTER RESET MEMORY MEMU \ TRACKING – V.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 LOCATIONS OF CONTROLS AND INDICATORS 4 Power failure indicator Digital Display 1 2 34 Comes on after a power failure. 5 5 Mode display œ Recording/playback speed mode œ Alarm search mode OFF E M H G F9 8 M œ Alarm scan mode S 7 œ Dew display 6 1 Operation Indicators œ They display the actual operation mode.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 LOCATIONS OF CONTROLS AND INDICATORS 6 Counter display œ Time display œ Counter display H M S Automatic tracking display œ Flashes while automatic tracking is performed. Mode display œ Sweep out mode Flashes while the memory contents are being recorded onto the tape after the end of the recording or the STOP button has been pressed to stop recording.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 LOCATIONS OF CONTROLS AND INDICATORS Back Panel 1 2 3 IN 45 OUT IN VIDEO 6 7 89 OUT IN S-VIDEO F G MIC IN OUT AUDIO A RS485 B EXT TIMER WARNING TAPE SW TIMER IN OUT OUT END OUT OUT ADDRESS 485 TERMINATE ON ON OFF 232 OFF IN OUT CLOCK SET PUSH OPEN COM IN OUT SERIES COM NON REC V.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 LOCATIONS OF CONTROLS AND INDICATORS 1 23 456 78 EXT TIMER WARNING TAPE TIMER IN OUT OUT END OUT SW OUT COM NON REC V.LOSS OUT OUT 9 FG HIJ KL IN OUT CLOCK SET COM IN OUT SERIES COM IN OUT EJECT M NO PQR ST ALARM RESET IN TRIGGER SHOT REC IN IN OUT ALARM NOTE: This terminal board may be damaged by 0.49N·m (5kg·cm) or more torque and using φ6mm-tip or more size screwdrivers.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 CONNECTIONS INSTALLING THE Ni-Cd BATTERY WARNING: The supplied Ni-Cd battery should be installed correctly before using the VCR. œ Do not short-circuit the battery pack terminals, and never try to disassemble or modify the battery pack. 1 Unscrew the Ni-Cd battery compartment screw until œ Do not throw it into a fire, as it may explode. the cover can be opened (the screw cannot be removed from the cover). œ Do not expose the battery to moisture.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 CONNECTIONS Connect the video camera and monitor TV as shown in the figure below. NOTE: Before making the connections, make sure the devices are disconnected from the power outlet.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 ON-SCREEN MENUS Main menus Sub-menus 1 When no menu is displayed on-screen, press the 1 From within one of the main menus, press the SHIFT ] or \ button to select one of the sub-menus, then press the MENU button. MENU button. ø The (MAIN MENU 1) menu appears. ø The selected sub-menu appears. œ When the first line “1. LANGUAGE/CLOCK SET” of the (MAIN MENU 1) is flashing, press the SHIFT \ button or when the last line “9.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 ON-SCREEN MENUS VARIOUS SET 1 menu @@@@ *THREAD@CHECK@@@@Y *REMOTE@@@@@@@@@@EJECT *EXT@TIME@ADJ.@@@01:00 *TAPE@END@OUT@@@@PRE *EJECT@SET @@EJECT@MODE@@@@@EJECT1 @@OPERATION@@@@@@SLAVE RS-485 SET (or RS-232C SET) menu @@@ @DATA@SPEED@@@@@19200 @STATUS@INFO@@@@Y @ALARM@INFO@@@@@Y [17] [50] [44] [49] [45] VARIOUS SET 2 menu @@@@ *TAPE@IN@MODE@@@@STOP *VIDEO@LOSS@@@@@@Y *REC@SPEED@@@@@@@N *CLOG@DETECT.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SETTING THE LANGUAGE AND CLOCK Language Setting Clock Setting English, French or Spanish can be selected by the user. Example: To set the clock to October 15, 2001 at 3:20 PM (15:20). 1 Turn the power on to all devices used. 2 Press the MENU button to display the (MAIN MENU 1 Press the MENU button to display the (MAIN MENU 1) menu. 1) menu. @@@@@@ 1.LANGUAGE/CLOCK@SET 2.DISPLAY@SET 3.BUZZER@SET 4.VARIOUS@SET@1 5.VARIOUS@SET@2 6.RECORD@SET 7.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SETTING THE LANGUAGE AND CLOCK NOTES: Automatic Daylight Saving Time Adjustment œ Clock display is only 24 hours. œ In STOP mode, press and hold the STOP button then press the TRACKING – button to reset the minutes and seconds to “00” (to the closest hour). For example, between 13:30:00 and 14:29:59 the clock is reset to 14:00:00. 1 Follow steps 1 and 2 under “Clock Setting”. 2 Press the SHIFT ] button, until the “DAYLIGHT SET” setting is flashing.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 CHANGING THE ON-SCREEN DISPLAY Selecting the On-screen Display Changing the Date/Time Display Position You can select to display or not the date, time, the number of alarm recordings, tape speed and alarm indication. 1 Turn the power on to all input devices to the VCR. 2 Set the ON SCREEN switch to the “ON” position. ø The date and time are displayed. 1 Turn the power on to all devices used.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 VIDEO CASSETTE TAPES Use only video cassette tapes bearing the S-VHS logo. Loading This VCR was primarily designed for use with ST-180XZES cassette tapes, for optimal performance only use ST-180XZES S-VHS videocassettes. 1 Place the cassette, label side up, in the loading slot. Gently push the center of the cassette until it is loaded automatically. ST-180XZES cassette tapes are available at any dealer where this unit is sold.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 VIDEO CASSETTE TAPES Correct tape thread check function Setting the Action to Take When a Cassette is Loaded If the correct tape thread check function is on, after the cassette tape is loaded, a mechanism will operate for about 12 seconds to check that the tape has been threaded (loaded) correctly and the cassette indicator “o” will blink during that period. If the tape is not loaded properly, the cassette will be ejected.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 TAPE MANAGEMENT FUNCTION If a conflict is found when the tape management data is checked, the (TAPE MANAGEMENT) menu is displayed and the conflicting setting will flash. This menu will show the settings taken from the data recorded on the tape and not the current data settings held in the VCR’s (TAPE MANAGEMENT) menu setting. Refer to “Tape Management Conflict Display” for detailed information. This VCR is equipped with a tape management function.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 TAPE MANAGEMENT FUNCTION OFF . . . . The number of re-recording times will not be checked. Setting the Tape Management Function 1 Press the MENU button to display the (MAIN MENU 1-100 . . . Maximum number of re-recording times. 1) menu. 2 Press the SHIFT ] button to select the “9. TAPE (Refer to “Concerning the Number of Times Tapes can be Rerecorded on” on page 23.) MANAGEMENT” line, then press the MENU button. ø The (TAPE MANAGEMENT) menu appears.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 TAPE MANAGEMENT FUNCTION PROTECT DAY CONFLICT Tape Management Conflict Display The tape is protected, the tape protection term (ex. 30 days) is not yet over. If when the tape management function checks the tape data a conflict that prevents recording is found, the (TAPE MANAGEMENT) menu is displayed with the conflicting setting flashing and the VCR go into stop mode. If in the (BUZZER SET) menu, WARNING is set to “Y”, the buzzer is heard.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 NORMAL RECORDING NOTES: Normal Recording œ A tape recorded on this VCR cannot be played back on other models of VCRs. Before starting œ Turn the power on to all devices used. œ If you press on the REC button and the loaded cassette has no erasure-prevention tab, the VCR will eject the cassette. œ Load a cassette tape with erasure-prevention tab. NOTES: œ This VCR will first store the recorded images in its internal memory before recording them to the tape.
RD2QD/NA (DTL-4800 GB) Tue. Aug.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 NORMAL RECORDING Concerning the Number of Times Tapes can be Rerecorded on Recording Check Depending on the recording speed mode, the tape must be replaced after a certain number of recording times. 1 During recording, press the PLAY button. The image being recorded can be checked. ø The tape will be rewound and then played back. The VCR will then return to the previous recording mode.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 NORMAL RECORDING Setting the Mode at the End of the Tape Action to Take when the Video Signal Deteriorates You can set the VCR mode when the tape reaches the end during recording. If there is no video signal during recording or when a menu is not displayed (in stop, fast forward or rewind modes), “VIDEO LOSS” can be displayed on-screen and a signal (0 V) can be output at the V. LOSS OUT terminal.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 NORMAL RECORDING Changes to the Recording Speed Mode During Recording Setup for use with a multiplexer This setting will indicate if a multiplexer is used or not during recording. It is possible to permit or prevent changing the recording speed mode during recording. 1 Press the MENU button to display the (MAIN MENU 1 Press the MENU button to display the (MAIN MENU 1) menu. 2 Press the SHIFT ] button to select the “5. VARIOUS 1) menu.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 AUTOREPEAT RECORDING NOTES: Autorepeat Recording œ If during autorepeat recording there is an alarm trigger, “A” is displayed on the digital display and alarm recording will take place. (Please refer to page 27, “ALARM RECORDING”.) The same tape can be recorded over many times. œ Follow the Before starting steps, under “NORMAL RECORDING”.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 ALARM RECORDING 4 Press the DATA l (or j) button to select the desired By connecting the ALARM IN terminal to a door switch, an interphone, etc., a recording can be done only when necessary. recording speed, then press the SHIFT ] button. N12. . . . . N12-hour mode recording U12. . . . . U12-hour mode recording Alarm Recording Setting H12. . . . .
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 ALARM RECORDING Alarm Recording Counter Display Checking the Alarm Recordings Time œ During alarm recording, “A” will be flashing on the digital display. The date and time of up to 100 alarm recordings can be displayed. œ If the ON SCREEN switch is set to the “ON” position, the alarm recording type “PRE ALARM, ALARM or POST ALARM” and the number of alarms will flash on the monitor screen. 1 Press the MENU button to display the (MAIN MENU 1) menu.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 ALARM RECORDING Alarm Search Alarm Scan To go to the beginning of a desired alarm recording. To look for an alarm recording by viewing the first 5 seconds of each alarm recording. 1 Press the SEARCH button during stop mode. 1 Press the SEARCH button twice during stop mode. ø “AL SEARCH 01” will be displayed on screen. ø “AL SCAN” will be displayed on screen. 2 Press the DATA l (or j) button to set the desired 2 Press the FF (or REW) button.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 ALARM RECORDING Pre Alarm Recording Setting Post Alarm Recording Setting When there is an alarm trigger, the pictures accumulated into the memory previous to the alarm trigger can be recorded using the set recording speed mode (duration). After the alarm recording, you can set recording of the picture to continue at a set recording speed mode, for only a set duration.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 PROGRAM TIMER RECORDING 8 Press the DATA l (or j) button to set the recording There are two program timer recording methods, daily recording or recording on certain days of the week. stop minutes (ex: 00), then press the SHIFT * button. ø The “SPD” (recording speed) position will start flashing. Example 1: To record on every Saturday from 9:00 AM to 5:00 PM (17:00), in H24-hour mode (recording speed).
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 PROGRAM TIMER RECORDING 9 Press the DATA l (or j) button to set the desired A timer recording of more than 24 hours can only be set on the 7th (SAT) and 8th (DLY) lines of the (TIMER SET) menu. stop day of the week (ex: MON), then press the SHIFT * button. ø The recording stop hour position starts flashing.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 PROGRAM TIMER RECORDING Setting the Holidays Changing a Program Timer Recording By setting the holidays, timer recording will be conducted on those days, as set for Sundays. 1 Press the MENU button to display the (MAIN MENU 1 Press the MENU button to display the (MAIN MENU 2 Press the SHIFT ] button to select the “7. TIMER 1) menu. SET” line, then press the MENU button. 1) menu. 2 Press the SHIFT ] button to select the “8.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 PROGRAM TIMER RECORDING NOTES: œ During timer recording or timer recording stand-by, all the buttons on the VCR, except the TIMER button and the buttons to set/cancel the security lock (see page 42), are disabled. œ If the power fails, the recording will be interrupted. When the power is restored, the recording will resume if the stop time has not yet been reached, and “P” will be displayed on the digital display.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 RECORDING USING AN EXTERNAL TIMER INPUT 6 Follow steps G and H under “PROGRAM TIMER Recording can be controlled by an external start/stop signal input at the EXT TIMER IN terminal. RECORDING on page 31”. ø When an external signal is input, “E” will light on the digital display and recording will take place. Example 3: To record using the signal input at the EXT TIMER IN terminal, in L24-hour mode.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 TRIGGER SHOT RECORDING When the trigger shot recording function is set, the set number of frames will be recorded when there is an input at the TRIGGER SHOT REC IN terminal. Connections Using a Multiplexer Video camera Trigger Shot Recording Setup Monitor TV Video camera 1 In stop mode, press the REC/PLAY SPEED l (or j) button, to set the recording speed to “000”. Video camera 2 Press the MENU button to display the (MAIN MENU VIDEO output jack 1) menu.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SERIES RECORDING Using 2 VCRs or more, the series recording function lets you switch recording from one unit to the next (only with VCRs of the same model as this one). The SERIES OUT signal will be present either at the point where approximately 5% of the tape remains (if recording has been started at the beginning of the tape) or when VCR No. 1 reaches the end of the tape (if recording has not been started at the beginning of the tape).
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SERIES RECORDING 3 Press the REC button on VCR No.1. Continous Loop Recording Setup ø Recording will start in series recording mode. A minimum of 2 units are required for continuous loop recording. 4 Set the security lock on VCR No.1. Under loop recording when the recording finishes on the first unit, the new recording will start on the second unit. When the recording finishes on the second unit, recording will start on the first unit.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 PLAYBACK Normal Playback Tracking Control 1 Turn on the power to the VCR and TV monitor. 2 Load the video cassette tape. 3 Press the REC/PLAY SPEED l (or j) button to If the playback picture is not clear 1 Press the TRACKING + and – button simultaneously. ø “----” flashes while automatic tracking is performed. select the playback speed mode. ø The selected playback speed mode is displayed on the digital display.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 PLAYBACK Search (Forward and Reverse) Field Advance (Forward and Reverse) 1 Press the FF button during forward digital view (or 1 Press the FF (or REW) button, during still image press the REW button during reverse digital view). mode. ø A portion of the recorded images will be played back. ø The still image is advanced (or rewound) of one image (field). 2 To return to normal playback, press the PLAY button.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 DAY/TIME SEARCH Day/Time Search NOTES: 1 Press the SEARCH button three times during stop œ If during a search the end of the tape is reached, the tape will rewind and stop. If the beginning of the tape is reached, it will stop. mode. ø “T/D SEARCH 01 00:00:00” will be displayed on screen. œ The alarm and day/time data are recorded on the tape in a similar format. If they overlap, the alarm data will have the priority.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SETTING THE SECURITY LOCK The security lock function is designed to prevent accidental stopping of recording if the STOP button is pressed inadvertently. NOTES: Setting the Security Lock œ During the security lock timer off period, “x” will be displayed and except for (SECURITY LOCK) menu changes all operations can be carried out. œ After the setting has been made, “x” will be displayed from the security lock timer off time to the on time.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SETTING THE BUZZER THREAD CHECK. . . The buzzer will be heard if the tape is not loaded properly. A buzzer can be set to sound during alarm recording, if during recording the tape reaches the end, if buttons are pressed or if there is a mechanical failure that causes the tape to stop or be ejected, etc. VIDEO LOSS . . . . . The buzzer will be heard if there is no video signal during recording. 1 Press the MENU button to display the (MAIN MENU 1) menu.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 CLOCK ADJUSTMENT Example When using 2 or more VCRs of this same model, the clock on the second VCR and on, can be synchronized with the clock on the first VCR, using the CLOCK ADJUSTMENT function. @@@@ *THREAD@CHECK@@@@Y *REMOTE@@@@@@@@@@EJECT *EXT@TIME@ADJ.@@@07:00 *TAPE@END@OUT@@@@PRE *EJECT@SET @@EJECT@MODE@@@@@EJECT1 @@OPERATION@@@@@@SLAVE 1 Connect the CLOCK SET OUT terminal on VCR 1 to the CLOCK SET IN terminal on VCR 2.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SETTING THE CASSETTE EJECT MODE EJECT terminal connection Cassette Eject Setup When using 2 VCRs or more, the cassette tape of all the VCRs or some of the VCRs can be ejected, if the EJECT terminals on the VCRs are connected as indicated. VCR No. 1 COM EJECT IN OUT VCR No. 2 COM EJECT IN OUT 1 Press the MENU button to display the (MAIN MENU 1) menu. 2 Press the SHIFT ] button to select the “4. VARIOUS SET 1” line, then press the MENU button.
RD2QD/NA (DTL-4800 GB) Tue. Aug.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SETUP FOR RS-232C OR RS-485 USE 8 Press the DATA l (or j) button to set the desired Setup for RS-232C or RS-485 Use setting. 1 Press the MENU button to display the (MAIN MENU Y. . . . . . . . . . The VCR alarm information (alarm recording start and stop) and video loss information are output at the RS-485 connector. 1) menu. 2 Press the SHIFT ] (or \) button until the (MAIN MENU 2) menu is displayed. 3 Press the SHIFT ] (or \) button to select the “1. N .
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SETUP FOR RS-232C OR RS-485 USE RS-232C 9-pin connector layout 1 Pin Signal Operation number 5 6 9 Signal direction 2 RXD Receive data VCR ← Computer 3 TXD Send data VCR → Computer 7 RTS Request to send VCR → Computer 5 GND Signal ground The signal transmission is compatible with RS-232C specifications.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 OUTPUT TERMINALS TAPE END OUT Terminal WARNING OUT Terminal œ During recording, when the end of the tape is reached or when approximately 5% of the tape remains, the output becomes 0V (Low). œ If the tape stops or other problem (the heads are dirty, there is a problem with the battery or the cooling fan, etc.) the output becomes 0V (Low). œ To reset the output, press the STOP or EJECT button.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 OUTPUT TERMINALS REMOTE Jack Remote control setting You can use a VA-RMN01 Remote Control Unit (sold separately) to control remotely the VCR. The remote control switch 7 can be set to either eject the tape or access the menus. 1 Press the MENU button to display the (MAIN MENU NOTE: 1) menu. œ The functions not available on the VCR will not operate. 2 Press the SHIFT ] button to select the “4.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 MAINTENANCE Daily Inspection Periodic Inspection The following daily inspections are recommended in order to assure long-term and trouble-free operation of the unit. Periodic inspection and maintenance should be referred to your dealer. The daily inspections are particularly important if using autorepeat recording. If the playback picture is not clear, and it cannot be corrected using the tracking control, it may indicated that the video heads need cleaning.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 MAINTENANCE Maintaining and Checking The Mechanism To maintain the VCR functions and features working properly, and to avoid damages or dirt on the tape, it is recommended to follow the maintenance points and periodicity indicated below. For detailed information, please contact your dealer.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 TROUBLESHOOTING GUIDE If the unit does not operate normally when you follow the instructions indicated in the manual, please refer to the table below.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SPECIFICATIONS General Specifications Recording method Playback method Audio recording Tape speed Specified video cassette tape Recording/playback time Fast forward/rewind time Television system RS-232C/RS-485 data transfer speed 2-head rotating helical scanning system 2-head rotating helical scanning system In 12-, 24-, 48- and 72-hour modes 13.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000 SANYO INDUSTRIAL VCR WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
RD2QD/NA (DTL-4800 E) 1AC6P1P2110– –B RD2QD/NA (0601KP-01) Wed. June, 06/2001 SANYO Electric Co., Ltd. Issue No. 2 Copyright SANYO, 2000 All rights reserved.