Thank-you for choosing Fisher. This compact and flexible audiologist comes with a built-in CD player, AM/FM stereo tuner, clock/timer feature, removable speakers and remote control, The unit is fully surmountable. SAFETY INFORMATION The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user ta the presence of insulated “dangerous . voltage” within the product’s enclosure that may be of sufficient magnitude to constitute 2 risk of electric shock to persons.
FCC information For CD player section: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2} this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS Read Instructions All the safety and operating instructions should be read before the product is operated. Retain Instructions The safety and operating instruction should be retained for future reference. Heed Warnings Alt warnings on the product and in the operating instructions should be adhered to, Follow Instructions All operating and use instructions should be followed. Cleaning Unplug this product from the wall outlet before cleaning.
IMPORTANT SAFETY INSTRUCTIONS 12. Grounding or Polarization This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should stile fail to fit, contact your electrician to replace your obsoletes outset. Do not defeat the safety purpose of the polarized plug. 13.
IMPORTANT SAFETY INSTRUCTIONS 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21.
LOCATION OF CONTROLS UNIT (cont.) 1.
LOCATION OF CONTROLS UNIT (cont.) 23, STOP Button Interrupting the CD playback/Cleaning the CD program 24. PLAY/PAUSE Button To start CD playback/Short interruption of CD playback 25. PRIG Button Tuner/CD program button/Clock setting button 26. TUNER/BAND Button Sets to tuner (radio) mode and selects the AM or FM band . 27. DISPLAY BACK LIGHT ON/OFF Button To select display back light on/off 28. AUXIN Jack (3.5mm) AUX in while in AUX select mode 26. AUX QUT Socket (L) 30, AUX OUT Socket (R} 31.
TS s To remove the insert, release 3 pcs To fix the insert, place it with two holes screws (1), then pull out the insert from into main unit speaker holder (2), then fix the main unit, it by 3 pcs screws (3). PLACE AND FIX THE SPEAKER e insert the speaker stud into the hole of the main unit (1). ® Push the speaker backward to the end until it clicks {2). DISASSEMBLE THE SPEAKER # Push the speaker forward from the back side (1) ® Release the speaker from the main unit speaker holder (2).
ANGLE ADJUSTMENT (Speakers) Used to connect the bracket (included) to set the speaker box on an angle. Insert the bracket with (A) side and push upward to adjust for vertical angle. Insert the bracket with (B) side and push upward to adjust for desired angle.
ANGLE (Main Unit) STEP 1 1. Disassemble the pedestal by releasing two screws from the main unit, if not per-done at the Factory. STEP 2 2. Pauli down the pedestal (1}. STEP 3 3. Lift up the unit and put the plastic supporter insert (2) into the pedestal soot position (3}. STEP 4 1. Press left and right stud (4} inward and select your desired angle (5) at same ime, 2. Release left and right stud (4}, the adjusted angle is secured.
ANGLE ADJUSTMENT (Cont. Main Unit) Used to connect the bracket (included) to stabilize the main unit standing angles. VERTICAL ANGLE 1. insert the bracket (1a) to main unit rear slot (1b). 2. Insert the bracket (2a) fo main unit rear slot (2b). 1. Follow STEP 4, press the studs {4} to adjust the angle and release to lock into position. 2. Insert the bracket (1a) to main unit rear slot (1b). 3. Insert the bracket (3a) to main unit rear slot (3b).
TN ] installation options: « Wall meant & One or both speakers attached or detached To replace the center section wall mount bracket: ® Disassemble the pedestal on the unit by releasing 4 pcs screws as FIG.1. ® Assemble wall mount bracket by attaching 4 pcs screws FIG. 2. ® Position the bracket {supplied) on the wall (as show below) where you want to hang the center unit. Oriel 2 holes slightly undersized for a firm fit. # Secure the bracket on the wall using 2 dowels and 2 screws (supplied).
REMOTE CONTROL Battery Installation o 1. Remove the battery tray by pressing point i {1a} inside, then sliding point (1b} area at i ~ the same time. = 2. Pull out the battery tray. \\ 3 Install or replace the bunion-type battery . ) “CR2032" (supplied) i Note: Sufi out insulation tag from the . i button battery tray before operating the | te control. 4 Close the battery tray.
LOCATION OF CONTROLS REMOTE CONTROL. (Cont.) MUTE Button To mute the sound CD Door OPEN/CLOSE Button Press to open or close the CD door TIMER/SUREWAKE Button To activate/deactivate the timer/ sure wake Remote Control Transmitter POWER ON/STANDBY Button Switches the system on or off 1~ 8, NUMERIC Buttons Tuner: To recall preset stations CD: To recall tracks .
POWER SUPPLY "AC power operation Take the cord out and connect it. = 120V NOTE: This unit is equipped with a polarized pig. if you have difficulty inserting the plug, tum it over and reinsert it. CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. BATTERY SUPPLY (For Tuner/Clock Memory Back-up) IMPORTANT NOTE: SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE LAWS.
OPERATING INSTRUCTIONS POWER ON/OFF When the AC power is connected, shows on the LCD display. 1. Press the POWER button to turn the unit ‘'ON' mwz;ww Note: The LCD display fights up and *HELLO” greeting shows on display, the STANDBY LED light goes off. Volume at 15 (max 30). 2. You can now select your desired music source by pressing one of the function buttons: TUNER/ BAND or CD PLAY/PAUSE Pl or AUX. 3.
TIMER ON/OFF SETTING NOTE: The clock should be adjusted before the Timer On/Off setting. 1 Press the TIMER button on remote control once, the TIMER ON indicator and hour digit begin to flash. Press the SKIP backward bunion to adjust the hour. Be sure to set the hour correctly for AM or PM. Press the SKIP forward button fo adjust the minute, Be sure to set the hour correctly for AM or PM. Press the TIMER button on remote control again, the TIMER OFF indicator and begin to flash.
BASIC OPERATION Electronic volume control Electronic volume contort display 3 1. Press VOL-DOWN bunion to adjust sound level down, the volume level (00 30) will be shown in the LCD display. 2. Holding down the butters will result in continuous decrease of the volume, 3. Similarly, press VOL-UP button to increase the volume. Muting Function 1f the MUTE bunion is pressed, the audio output wilt be muted, and the current display begins to flashing. L eyt I S ir Pressed the MUTE button again to resume.
LISTENING TO THE RADIO 1. Press the POWER button to tum the system 'ON'. 2. Press the TUNER/BAND button to select the radio function. TN moan umJ Example : FM mode 3. Press the TUNER/BAND button repeatedly to defect AM or FM band. 4. Press the SKIP forward o backward buttons to wine to the desired station, Auto tuning Press the TUNING forward or backward buttons momentarily and release. The tuner will move up or down to the next available station.
PLAYING COMPACT DISCS 1. Switch on the power and press the PLAY/ PAUSE button e} t select the CD mode. If there is no CD inside, a "DISC" display will appear. When there is no disc M Loading a disc 1. Press the CD DOOR OPEN/CLOSE button to pane the CD door. i Mot To load a disc, simply put the disc onto the center spindle of the player and then press the €D DOOR OPEN/CLOSE button again to close the CD door. After that, reading TOC will start.
To repeat a track or disc Press REPEAT bunion on remote control one time, “one track repeat” will be active. “REPEAT 1" shows on display. One frack rep! REPEAT nt fifil-flB 4 iRk With one more press, “all track repeat” wife be active, *“REPEAT ALL” shows on display. Alf track repeat With ane further press, the repeat mode is canceled. Random play function Press RANDOM button on remote control during CD play or stop mode to start random play. Pressing once again wife cancel the function.
ARE AND MAINTENANCE COMPACT DISC CARE . Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unpainted side of the disc. . Do not attach adhesive tape, stickers etc., to the disc label. Clean the disc periodically with a soft, lint-free, dry sloth. Never use detergents or adhesive cleaners to clean the disc. If necessary, use a CD cleaning kit.
TROUBLESHOOTING GUIDE Should this unit exhibit a problem, check the following before seeking service. Symptom Possible cause Solution Radio Noise or sound distorted broadcasts. Station not tuned properly for AM or FM Re tune the AM or FM broadest station. FM: Antenna wire is not extended. Extend FM antenna wire. AM: Unit is not positioned correctly. Rotate unit until best reception is obtained. FM STEREO indicator does not light FM MODE button is set fo MONO position, Set FM MODE to FM STEREO position.
FISHER STUDIO STANDARD MODEL SLIM-1600 LIMITED WARRANTY OBLIGATIONS in order to again factory warranty service, call the loft-free number below. The unit must be packed in the original carton or 2 well padded sturdy carton in order to avoid shipping damage. Note: Do not return this unit to the retail store for service.