PLEASE READ THIS MANUAL THOROUGHLY BEFORE OPERATING THE UNIT. RETAIN IT FOR FUTURE REFERENCE. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING. CAUTION INVISIBLE LASER RADIATION CLASS 1 WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO BEAM 'LASER PRODUCT CARE AND MAINTENANCE 1. Turn off the unit before changing batteries or plug in the AC Jack to the unit. 2. Fresh batteries are recommended to be used. 3. Avoid leaving unit in direct sunlight or in hot, humid or dusty places. 4.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and in the operating instructions should be adhered fo. 4. Follow Instructions All operating and use Instructions should be followed. 5. Cleaning Unplug this product from the wall outlet before cleaning.
Power Sources This product operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, conduit your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
grounding of the lead-in EXAMPLE OF ANTENNA GROUNDING AS PER . NATIONAL ELECTRICAL DOGE, ANSHAN 70 wire to an antenna discharge unit, size of i grounding conductors, T e e location of antenna) Va G discharge unit, connection e [ to grounding electrodes, and requirements o re DEERE for the grounding electrode.
b) If liquid has been spills, or objects have alien into the product, ¢) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions.
1. Installation of speaker a)Connect speaker cable o speaker jack of main unit. b)The wire with black stripe should connect to black terminal of the speaker jack. ¢)The speaker stand can be set up with 2 directions. 2. Make sure the power cord is securely firmed into the AC outlet. 3. Remove the insulated plate in the backup battery compartment. 4. Wall mounting remove the stands from the main unit and both speakers.
1. POWER button turn on / off the unit 2. SLEEP button control period of power off 3. RADIO / BAND button power on.radio or select radio band 4. CHANNEL button select radio preset station 5. Memory/ PROGRAM button save radio preset station / enter CD program mode / save sifting 6. MODE button enter setting mode 7. ALM ON/OFF -furn on/off the alarm 8. SNOOZE / LIGHT button enter snooze mode /tum on display back light / exit the setting mode 9.
POWER button turn on / off the unit SLEEP button control period of power off OPEN button open / close the CD door CD PLAY PAUSE button to play /to pause / resume CD playback / turn on CD playback STOP button to stop CD playback / turn off the CD playback (144 ȴ1 ) button CD searching + Vol button adjust volume level up or down RADIO button turn on the radio . BAND button select radio band 10. PRESET+/button select the preset radio channel 11. MUTE button mute volume of the unit 12.
© Automatic Tuning : Press and hold the TUNING <44 or W buttons until the display starts to scan, and then release the button. The Tuner will stop on the first strong station it fends Repeat this procedure until the desired frequency appears in the display ® Manual Tuning : Repeatedly press the TUNING <« or wp buttons to manually move the display up or down until you reach the frequency of the desired station. NOTES : A.
LOADING A CD 1. Press the POWER button. 2. Touch the OPEN bunion, the CD door will open automatically. 3. Put a CD, printed side facing down, on the CD door as diagram shown. 4. Touch the OPEN button to close the CD door. 1. Press PLAY / PAUSE button to start playback. 2. Adjust the sound level using VOLUME button. PAUSE CD 1. Press PLAY / PAUSE button pause / resume CD playback. 2. Press STOP bunion to stop CD playback. 3. Press STOP button again to turn off the unit.
3. When desired track number is displayed, press MEM / PGM button to register. Track number " 00 " indicator flashes on display again. 4. Repeat steps (2} & (3) above until all desired tracks had been entered. 5. Press PLAY/PAUSE (» 11) button. " PGM " indicator stops flashing and CD starts program playback. NOTE: ~ If you press the 4« and Wy buttons during programmed playback, the unit will skip forward to the next track in the program, not necessary the next track on the disc.
SETTING YEAR & TEMPERATURE 1. Press MODE button 5 times, the year & temp display will flash. 2. Press button set advance or reverse.the year. 3. Press button Color VOL+ fo select temperature unit °Cor °F 4. Press MEM / PGM button to save entries or just wait for around 15 seconds to exit setting mode. SETTING MONTH & DATE 1. Press MODE button 6 times, the month / date display will flash. 2. Press button set advance or reverse the month. 3. Press button Color VOL+ to set advance or reverse the date. 4.
The buzzer stops for around 8 minutes and then comes on again This operation can be repeated 3 times. After the fourth time the alarm shuts off until the next day. © After the buzzer sounds you may also press the ALM ON / OFF button to stop jt immediately. It will reset itself for the following day. ALARM TO RADIO @ Aft he desired wake up time the radio turns starts softly and gradually becomes louder. ® [t will play for 15 minutes and then shuts off and resets itself for the following day.
@ During the CD playback you may also press the ALM ON / OFF button to stop it immediately. It will reset itself for the following day. You can use the Sleep Timer to shut the system off automatically " while you fall asleep to the radio or the CD player. 1. Press POWER button to turn on the unit. 2. Load the desired CD in the player or tune to the desired radio station. 3. Press SLEEP button times to select minutes of Sleep Timer operation.
1. Plug the AC power cord into AC outlet. 2. Using a straightened paper clip, toothpick, or similar object press RESET button located inside the pinhole at the rear.side of the unit. Caution : DO NOT use a sharp end object to press the RESET button, it may damage the reset switch inside the unit. Note ! RESET operation will clear the system memory and all of your previous settings will be cleared. TROUBLESHOOTING GUIDE : Should this unit exhibit a problem, check the following before seeking service.
FISHER MICRO AUDIO SYSTEM«MODEL SLIM-1400 LIMITED WARRANTY OBLIGATIONS In order to obtain factory warranty service, call the toll-free number below. The unit must be packed in the original carton or a well padded sturdy carton in order to avoid shipping damage. Note: Do not return this unit to the retail store for service.