Computer Input Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal position and Vertical position to conform to your computer. Menu Operation Auto PC 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select PC adjust and then press the Point ► button or the OK button. 2 Use the Point ▲▼ buttons to select Auto PC and then press the OK button.
Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu.
Computer Input Reset To reset the adjusted data, select Reset and press the OK button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures. Mode free Mode free To clear the stored data, select Mode free and then press the Point ► button or the OK button. Move the highlight to the Mode that you want to clear and then press the OK button. Store This Mode has stored parameters.
Computer Input Image Mode Selection Direct Operation Select the desired image mode among Presentation, Standard, High contrast, Cinema, Blackboard (Green), Colorboard, User 1, User 2, User 3 and User 4 by pressing the IMAGE button on the remote controller. IMAGE button Remote controller Presentation Standard High contrast Cinema Menu Operation 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image select and then press the Point ► button or the OK button.
Computer Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► button or the OK button. 2 Use the Point ▲▼ buttons to select the desired item and then press the OK button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value. Image Adjust Menu Contrast Press the Point ◄ button to decrease the contrast, press the Point ►button to increase the contrast (from 0 to 63).
Computer Input Aspect Setting This projector has the picture screen resize function, which enables you to customize the image size. 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Aspect and then press the Point ► button or the OK button. 2 Use the Point ▲▼ buttons to select the desired item and then press the OK button. Aspect Menu Normal Provide the image to fit the screen size. Full Provide the full screen image.
Computer Input Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and D. zoom + appears. Press the OK button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + or the OK button. Digital zoom – Select Digital zoom –. The On-Screen Menu disappears and D. zoom – appears. Press the OK button to compress image size.
VIDEO Input Input Source Selection (VIDEO, S-VIDEO) Direct Operation Choose VIDEO or S-VIDEO by pressing the INPUT button on the top control, or the VIDEO or the S-VIDEO button on the remote controller. Before using these buttons, correct input source should be selected through menu operation as described below. Top Control INPUT button Remote controller VIDEO button VIDEO S-VIDEO button S-VIDEO Menu Operation 1 Press the MENU button to display the On-Screen Menu.
VIDEO Input Input Source Selection (COMPONENT, SCART, HDMI) Direct Operation Choose COMPUTER 1(COMPONENT) or COMPUTER 1 (SCART) by pressing the COMPONENT or the COMPUTER 1 button on the remote controller. Choose HDMI by pressing the HDMI button on the remote controller or you can press the INPUT button on the top control to choose the desired input source. Before using these buttons, correct input source should be selected through Menu operation as described below.
VIDEO Input VIDEO System Selection 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► button or the OK button. 2 Use the Point ▲▼ buttons to select VIDEO, S-VIDEO or COMPUTER 1(COMPONENT) and then press the OK button. 3 Use the Point ▲▼ buttons to select System and then press the Point ► button or the OK button. Use the Point ▲▼ buttons to select the desired system and then press the OK button.
VIDEO Input Image Mode Selection Direct Operation Select the desired image mode among Presentation, Standard, High contrast, Cinema, Blackboard (Green), Colorboard, User 1, User 2, User 3 and User 4 by pressing the IMAGE button on the remote controller. Remote controller IMAGE button Presentation Standard High contrast Cinema Menu Operation 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image select and then press the Point ► button or the OK button.
VIDEO Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► button or the OK button. 2 Use the Point ▲▼ buttons to select the desired item and then press the OK button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value. Contrast Press the Point ◄ button to decrease the contrast, press the Point ► button to increase the contrast (from 0 to 63).
VIDEO Input Noise reduction Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off......... Disabled. L 1......... Lower reduction L 2......... Higher reduction Progressive An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off......... Disabled. L 1......... For an active picture. L 2......... For a still picture. Film...... For watching a film.
VIDEO Input Aspect Setting This projector has the picture screen resize function, which enables you to customize the image size. 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Aspect and then press the Point ► button or the OK button. 2 Use the Point ▲▼ buttons to select the desired item and then press the OK button. Aspect Menu Normal Provide the image to fit the screen size while maintaining the aspect ratio of the input signal.
VIDEO Input Keystone This function is used to adjust keystone distortion of the projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. Keystone To correct keystone distortion, press the OK button. Keystone appears on the screen. Use the Point ▲▼ buttons to correct keystone distortion (p. 25). Store To store or reset the keystone correction, press the Point ► button. Store........... Keep the keystone correction even when the AC power cord is unplugged. Reset...........
Setting Setting This projector has a Setting menu that allows you to set up the other various functions described below. 1 Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► button or the OK button to access the submenu items. 2 Use the Point ▲▼ buttons to select the desired item and then press the Point ► button or the OK button to access the selected item.
Setting Auto setup Auto setup This function enables Auto input, Auto PC and Auto Keystone adjustment by pressing the AUTO SET button. Settings for those functions can be altered as follows: Auto input This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point ▲▼ buttons to select one of the following options. Off........ Auto input does not work. On 1..... Auto input works under the following situation.
Setting Background Select the background screen for when no input signal is detected. Press the Point ▲▼ buttons to switch between each option. Blue........Project a blue background. User........Project an image captured in the Logo setting. Black......Project a black background. Display This function decides whether to display On-Screen Displays. On......................... Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough.
Setting Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Capture Select Capture and press the OK button. A confirmation box appears and select Yes to capture the projected image. After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector or when you press the BLANK button (p. 28).
Setting Enter a Logo PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ◄► buttons to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄► buttons to move the pointer to the number you want to correct, and then enter the correct number. Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to Set.
Setting HDMI setup This function is only used for HDMI input source. HDMI setup Image Select Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment. Sound HDMI: W hen using the HDMI cable, select HDMI. Both video and audio are transferred and you need not to connect any additional cables for audio. COMPUTER 2 : When using the DVI-HDMI cable, select COMPUTER 2 and connect the audio cable to COMPUTER IN 2 termimal.
Setting Picture in Picture This function is used to project two images simultaneously by placing a separate small sub screen within or next to the main screen. Use the Point ▲▼ buttons to select Picture in Picture and then press the OK button to access the submenu. Only the sound from the source of Main picture is valid, while the source of Sub picture cannot output the sound.
Setting Power management mode For reducing power consumption as well as maintaining the lamp life, the Power management mode function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Standby......... When the lamp has been fully cooled down, the POWER indicator changes to green blinking.
Setting Standby mode This function is available when operating the projector via network. Network... Supply the power to the network function even after turning off the projector by pressing the POWER button on the remote controller. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off. Eco.......... Select Eco when you do not use the projector via network.
Setting Closed caption Closed caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4. If the Closed caption is not clear, you can change the text from Color to White. Closed caption Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4, and then press the OK button.