DVD-R Drive CRD-DV1 OWNER’S MANUAL
Page 2 Document No. Document Name Revision History (1/1) 1. Revision History Revision No. First Edition Manager Change Description Newly issued SANYO Electric Co., Ltd.
Page 3 Document No. Document Name Included Document List (1/1) 2. Included Document List Document Name Document No. General Description Dimensions, External View and Names and Functions of Each Part Terminal Description Environmental Conditions Reliability Lot No. Reliability Description Safety Standards Electrical Characteristics Function Description Handling Manual Notes for Handling Page No.
Page 4 Document No. Document Name General Description (1/3) General Description (1) Model Name: CRD-DV1 (DVD-R drive with MAX ×12 speed reading, ×4 speed writing, CD-R drive with MAX ×40 speed reading, ×24 speed writing, and ×12 rewriting) (2) External View External View (3) General Specifications 1) Characteristics * Half-height and built-in type * Conforms to Orange Book Part 2, 3 & DVD-R for general specifications.
Page 5 Document No. Document Name General Description (2/3) (4) Applications Wide range of applications available, such as image data filing, management of CAD/CAM, drawing data and financial affairs, audio data storage and electronic publication. (5) Main Specifications Items Specifications Dimensions 148 (W) x 194.2 (D) x 42.3 (H) mm Mass 1020 g Recording Form Front Panel Orange-book part 2, 3 Fixed packet DVD-R for general 2.
Page 6 Document No. Document Name General Description (3/3) (7) Scope This specification is applied to the CD-R/RW/DVD-R drive “CRD-DV1” which is designed by SANYO Electric Co., Ltd. (8) Contents 1) Model No. CRD-DV1 2) Performance Write function onto CD-R/RW/DVD-R disc in combination with the write application software and CD-ROM/DVD-ROM read function, in combination with the CD-ROM/DVD-ROM application software. 3) Applications Write onto and read of the CD-R/RW/DVD-R disc.
Page 7 Document No. Document Name Dimensions, External View and Names and Functions of Each Part (1/2) 1. Dimensions and External View (1) External View Refer to the “General Description”. (2) Dimensions and Dimensional Drawing Refer to the attached document “Dimensions and Dimensional Drawing”. (3) Names and Functions of Each Part on the Front Panel Front Panel 7 6 1 2 3 4 5 1. Headphone Terminal : The headphone with a stereo mini plug is connected through this terminal. 2.
Page 8 Document No. Document Name Dimensions, External View and Names and Functions of Each Part (2/2) (4) Names and Functions of Each Part on the Rear Panel Rear Panel 5 7 6 1 2 3 4 1. ANALOG AUDIO Connector : The audio analog signal output connector. 2. CS/SL/MA Pins : By covering the jumper block, these pins are used to set the CD-R drive to either a Master or Slave mode to work with the hard disk drive inside the personal computer. Default is Master.
Page 9 Document No. Document Name Terminal Description (1/3) 1. AUDIO Terminals The audio signal is output through these terminals. These terminals are used when the sound board applicable to these terminals, is attached to the personal computer. R-ch GND GND L-ch 2. Jumper Terminals (CS/SL/MA) SL Jumper Terminals: To set to Slave mode, cover the jumper block on the 2 pins of the SL jumper terminals.
Page 10 Document No. Document Name Terminal Description (2/3) 3. IDE Connector Terminals (ATAPI CONNECTOR) The IDE terminal of the host computer is connected through these terminals. Use the 40-pin IDE cable. The pin marked “1” means pin No. 1. Connect the IDE cable of the color-coding (normally red) on one edge to pin No. 1. 39 1 40 2 PIN NO. SIGNAL NAME PIN NO.
Page 11 Document No. Document Name Terminal Description (3/3) 4. DC Connector Terminals (DC INPUT) The DC power supply cable is connected through these terminals. 5V GND 12V SANYO Electric Co., Ltd.
Page 12 Document No. Document Name Environmental Conditions (1/1) Environmental Conditions Items Environmental Conditions : 5 °C < to < 40 °C Operation Temperature Storage : −30 °C < tNO < 60 °C Operation Humidity : (20 to 80) % (non-condensing) Storage : 90 % (40 °C, 48 h) Mean-Time-Between-Failure (MTBF) 30000 POH DUTY 20 % (read operation) Life Tray loading : 20000 cycles Traverse mechanism : 1000000 seek (Note 1) Operation: Read 0.98 m/s2 (0.
Page 13 Document No. Document Name Reliability (1/3) 1. Estimate Conditions 1) Standard test position For the standard test position, the + side of the Z axis shall be in the upper direction, provided that the Z axis shall be the outgoing beam and the direction of the outgoing beam shall be + side. 2) Standard Estimate Environments Temperature : (22 ± 2) °C Humidity : (50 ± 5) % RH However, when no doubt occurs regarding the judgment, the test may be performed under the following conditions.
Page 14 Document No. Document Name Reliability (2/3) Test items Test conditions Criteria 1. Operating temperature test Operation under low temperature: +5 °C Operation under high temperature: +40 °C Leave the product for 4 hours without operation in the environmental temperatures, as above. Turn on the power and leave the product for 10 minutes. Immediately after that, check the performance under the same environmental temperatures as above. However, there should be no dew condensation.
Page 15 Document No. Document Name Reliability (3/3) The following table shows the reliability standards for the main parts (units) which are used in this product. Test items Test conditions 10. Laser diode life 11. Spindle motor life 12. Feeder motor life Criteria Check the recorded power after 1000 hours of operation at 60 °C. (except for breakage caused by static electricity) Measure the current in the motor after 1000 hours operation. The error rate should be 1 % or less.
Page 16 Document No. Document Name Lot No. Reliability Description (1/1) Lot No. Description [Serial No. Indication] 1 2 3 4 5 6 7 8 A B C D D D D D A. Factory: Korea Tokyo Electronics: 6, Sanyo Media Tech: 3, SSHQ: 8 B. Year of manufactured: (1996: 6, 1997: 7, 1998: 8, 1999: 9, 2000: 0, 2001: 1, 2002: 2, 2003: 3, 2004: 4, 2005: 5) C. Month of manufactured: Form Jan. to Sep.: 1 ~ 9 & Form Oct. to Dec.
Page 17 Document No. Document Name Safety Standards (1/1) Safety Standards 5. UL (UL1950 / FDA1040) (2) CUL (UL1950) (3) Label SANYO Electric Co., Ltd.
Page 18 Document No. Document Name Electrical Characteristics (1/3) Electrical Performance Specifications Items Reading speed DVD-Read ×12(CAV) speed : 6.7MB/s(disc in side) to 16.2MB/s(disc out side) CD-Read ×40(CAV) speed: 2.4 MB/s (disc in side) to 6.
Page 19 Document No. Document Name Electrical Characteristics (2/3) Mechanisms Items Specifications Pick-up NA : 0.51/0.67 Focus : Astigmatism Tracking : DPP/DPD Wave length : 784/660 nm (standard) Traverse mechanism Stepping motor Spindle motor DC brushless motor Loading mechanism Automatic loading system Usable Media of DVD Media name Capacity Reading Writing DVD-ROM single 4.7GB - DVD-ROM dual 8.7GB - DVD-RAM V1.0 2.6GB × × DVD-RAM V2.0 4.7GB × × DVD-R V2.
Page 20 Document No. Document Name Electrical Characteristics (3/3) Application Discs Items Specifications CD-ROM mode 1 CD-ROMXA (Video CD) mode 2 form 1, mode 2 form 2 CD-DA Applicable Photo CD Single session, multi-session CD-I, CD-G, CD-TEXT Applicable CD Extra 2 Session First Session : CD-DA Second Session : Data Disc dia. 12 cm, 8 cm Storage capacity 12 cm : 656 MB (mode 1) 8 cm : 180 MB 748 MB (mode 2) Disc thickness 1.2 mm Track pitch 1.
Page 21 Document No. Document Name Function Description (1/3) 1. External View/Mechanism (1) Tray type disc loading system The disc is loaded on the TRAY. (2) LED Indicator BUSY : ON — Command executing conditions ON-AND-OFF — TOC reading condition & EJECT condition OFF — Pausing and stop conditions WRITE : ON — Recording condition OFF — Others (3) EJECT key The disc is taken out using this key. This key is available even when the tray is moving.
Page 22 Document No. Document Name Function Description (2/3) 3. Data write processing (1) Write speed i. DVD-R ×1, ×2, ×4(CLV) ii. CD-R ×4, ×8, ×16, ×20, (CLV)、×20 ~ ×24 (ZCLV) write speed are applicable. (mastering write) iii. CD-RW ×4, ×10 , ×12(CLV), write speed are applicable. Arbitrary speed can be set using the ATAPI command.
Page 23 Document No. Document Name Function Description (3/3) 4. Servo/access (1) Servo Automatic Adjustment When the disc is loaded, the focus, tracking offset and servo gain are adjusted automatically. (2) Sled Control using the Stepping Motor Driving The mechanisms and circuits related to the sled are simplified. The micro step operation is controlled using the micro computer when the access-time-specific trapezoidal driving occurs and the read/write operation is performed.
Page 24 Document No. Document Name Handling Manual (1/1) (1) How to use Before using this product, make sure that the device driver for the Combo driver is installed in the personal computer. 1) How to insert the disc. i. Turn on the power of the main machine where the product is attached. ii. Press the eject key to open the disc tray. iii. Place the disc on the tray so that the printed side is upside. iv. Press the eject key to close the disc tray. v. Read the disc.
Page 25 Document No. Document Name Notes for Handling (1/5) 1. Don't look at the laser beam. Don't look at the laser beam source. If the laser beam hits your eyes, it might cause damage to your eyes. 2. Don't use deformed or cracked CDs and DVDs. Don't use cracked, deformed CDs and DVDs or repaired CDs and DVDs with adhesives. As the disc turns with high speed within the product, broken pieces might scatter and hurt you. 3. Don't touch the inside components of this product.
Page 26 Document No. Document Name Notes for Handling (2/5) 8. Maintenance (1) The dirt on this product should be cleaned off lightly with a soft cloth with some water or diluted neutral detergent. (2) Make sure not to use volatile chemicals such as benzine and thinner, because they might cause deformation and color change of the product. 9. Notes for the Handling of the Disc. (1) When you carry the disc, don’t touch the side where no letters are printed.
Page 27 Document No. Document Name Notes for Handling (3/5) Dimensions The following items should be considered when enclosure chassis for this drive is designed. 1. Over 5 mm space should needed between top of drive and enclosure chassis. 2. Don’t press the production label even if there are any reasons. SANYO Electric Co., Ltd.
Page 28 Document No. Document Name Notes for Handling (4/5) Package SANYO Electric Co., Ltd.
Page 29 Document No. Document Name Notes for Handling (5/5) Package Configuration GROSS WEIGHT 12 kg 300 unit 1 pallet: 6 box × 5 stack (30 box) Pallets are to be banded and stretch-wrapped. Corner strips are attached. SANYO Electric Co., Ltd.