Page 3 Document No. Document Name (1/1) Included Document List 2. Included Document List Document Name Document No. Page No. General Description 1/3 ~ 3/3 4〜6 Dimensions, External View and Names and Functions of Each Part 1/2 ~ 2/2 7〜8 Terminal Description 1/3 ~ 3/3 9〜11 Environmental Conditions 1/1 Reliability 1/3 ~ 3/3 Lot No.
Page 4 Document No. Document Name General Description (1/3) General Description (1) Model Name: CRD-BP1500U40X (CD-R drive with MAX ×48 speed reading, ×40 speed writing, and ×12 speed rewriting) (2) External View External View (3) General Specifications 1) Characteristics * Half-height and built-in type * Conforms to Orange Book Part 2, 3 * Equipped with the newly developed automatic strategy LSI with the data reliability enhanced.
Page 5 Document No. Document Name (2/3) General Description (4) Applications Wide range of applications available, such as image data filing, management of CAD/CAM, drawing data and financial affairs, audio data storage and electronic publication. (5) Main Specifications Items Specifications Dimensions 146 (W) x 188.5 (D) x 41.
Page 6 Document No. Document Name General Description (3/3) (7) Scope These delivery specifications are applied to the CD-R/RW drive “CRD-BP1500U40X” which is sold by SANYO Electric Co., Ltd. (8) Contents 1) Model No. CRD-BP1500U40X 2) Performance Write function onto CD-R/RW disc in combination with the write application software and CD-ROM read function, in combination with the CD-ROM application software. 3) Applications Write onto and read of the CD-R/RW disc. Read of CD-ROM disc.
Page 7 Document No. Document Name Dimensions, External View and Names and Functions of Each Part (1/2) 1. Dimensions and External View (1) External View Refer to the “General Description”. (2) Dimensions and Dimensional Drawing Refer to the attached document “Dimensions and Dimensional Drawing”. (3) Names and Functions of Each Part on the Front Panel Front Panel 7 6 1 2 3 4 5 1. Headphone Terminal : The headphone with a stereo mini plug is connected through this terminal. 2.
Page 8 Document No. Document Name Dimensions, External View and Names and Functions of Each Part (2/2) (4) Names and Functions of Each Part on the Rear Panel Rear Panel 1 2 3 4 5 6 7 1. DIGITAL AUDIO Connector (Note 1) 2. ANALOG AUDIO Connector 3. Stereo Jack 3P 4. Factory use only Pins 5. USB 2.0 Connector(Not BUS Powerd) 6. Power Switch (When using DC Connector 5 P.) 7. DC Connector 5 P (Note 2) 8. DC Connector 4 P (Note 2) 9.
Page 9 Document No. Document Name Terminal Description (1/3) 1. DIGITAL AUDIO Connector The audio digital signal output connector. Connect the personal computer’s audio internal cable here. DIGITAL GND 2. ANALOG AUDIO Terminals The audio signal is output through these terminals. These terminals are used when the sound board applicable to these terminals, is attached to the personal computer.
Page 10 Document No. Document Name Terminal Description (2/3) 3. IDE Connector Terminals (USB2.0 CONNECTOR) USB2.0 is connected to the host computer. 2 1 3 4 PIN NO. SIGNAL NAME 1 VBUS 2 D− 3 D+ 4 GND 4. DC Connector Terminals (DC INPUT) 4 P The DC power supply cable is connected through these terminals. (Connect the personal computer’s DC power cable here) 5V GND 12V SANYO Electric Co., Ltd.
Page 11 Document No. Document Name Terminal Description (3/3) 5. DC Connector Terminals (DC INPUT) 5 P The DC power supply cable is connected through these terminals. The DC power supply external cable is connected through these terminals. 5 4 2 3 1 (Front View) PIN NO. SIGNAL NAME 1 +12 V 2 GND 3 +5 V 4 GND 5 +5 V SANYO Electric Co., Ltd.
Page 12 Document No. Document Name (1/1) Environmental Conditions Environmental Conditions Items Environmental Conditions Temperature Humidity Operation : 5 °C < to < 40 °C Storage : −30 °C < tNO < 60 °C Operation : (20 to 80) % (non-condensing) Storage : 90 % (40 °C, 48 h) Mean-Time-Between-Failure (MTBF) 30000 POH DUTY 20 % (read operation) Life Tray loading : 20000 cycles Traverse mechanism : 1000000 seek Vibration (Note 1) Operation: Read 0.98 m/s2 (0.
Page 13 Document No. Document Name Reliability (1/3) 1. Estimate Conditions 1) Standard test position For the standard test position, the + side of the Z axis shall be in the upper direction, provided that the Z axis shall be the outgoing beam and the direction of the outgoing beam shall be + side. 2) Standard Estimate Environments Temperature : (22 ±2) °C Humidity : (50 ±5) % RH However, when no doubt occurs regarding the judgment, the test may be performed under the following conditions.
Page 14 Document No. Document Name Reliability (2/3) Test items Test conditions Criteria 1. Operating temperature test Operation under low temperature: +5 °C Operation under high temperature: +40 °C Leave the product for 4 hours without operation in the environmental temperatures, as above. Turn on the power and leave the product for 10 minutes. Immediately after that, check the performance under the same environmental temperatures as above. However, there should be no dew condensation.
Page 15 Document No. Document Name Reliability (3/3) The following table shows the reliability standards for the main parts (units) which are used in this product. Test items 10. Laser diode life 11. Spindle motor life 12. Feeder motor life Test conditions Criteria Check the recorded power after 1000 hours of operation at 60 °C. (except for breakage caused by static electricity) Measure the current in the motor after 1000 hours operation. The error rate should be 1 % or less.
Page 16 Document No. Document Name Lot No. Reliability Description (1/1) Lot No. Description [Serial No. Indication] 1 2 3 4 5 6 7 8 A B C D D D D D A. Factory: Korea Tokyo Electronics: 6, Sanyo Media Tech: 3, SSHQ: 8 B. Year of manufactured: (1996: 6, 1997: 7, 1998: 8, 1999: 9, 2000: 0, 2001: 1, 2002: 2, 2003: 3, 2004: 4, 2005: 5) C. Month of manufactured: Form Jan. to Sep.: 1 ~ 9 & Form Oct. to Dec.
Page 17 Document No. Document Name Safety Standards (1/1) Safety Standards 6. UL (UL1950 / FDA1040) (2) CUL (UL1950) (3) Label SANYO Electric Co., Ltd.
Page 18 Document No. Document Name Electrical Characteristics (1/3) Electrical Performance Items Specifications Reading speed ×16 ~ ×48 (CAV) speed : 2.4 MB/s (disc in side) to (Note 1) 7.2 MB/s (disc out side) (typical) Writing speed CD-R ×4, ×8, ×16, ×20 CLV, ×20 ~ ×40 (ZCLV) CD-RW ×4, ×10, ×12 CLV Mean random seek time 130 ms (typical) Buffer size 4 MB Photo CD Applied Audio Sampling Frequency Error rate 44.1 kHz T.H.D. Line Out Headphone (Total Harmonic Distortion) 0.15 % 0.
Page 19 Document No. Document Name (2/3) Electrical Characteristics Mechanisms Items Specifications Pick-up NA : 0.50 Focus : Astigmatism Tracking : DPP Wave length : 783 nm (standard) Traverse mechanism Stepping motor Spindle motor DC brushless motor Loading mechanism Automatic loading system SANYO Electric Co., Ltd.
Page 20 Document No. Document Name (3/3) Electrical Characteristics Application Discs Items Specifications CD-ROM mode 1 CD-ROMXA (Video CD) mode 2 form 1, mode 2 form 2 CD-DA Applicable Photo CD Single session, multi-session CD-I, CD-G, CD-TEXT Applicable CD Extra 2 Session First Session : CD-DA Second Session : Data Disc dia. 12 cm, 8 cm Storage capacity 12 cm : 656 MB (mode 1) 748 MB (mode 2) 8 cm : 180 MB Disc thickness 1.2 mm Track pitch 1.
Page 21 Document No. Document Name Function Description (1/3) 1. External View/Mechanism (1) Tray type disc loading system The disc is loaded on the TRAY. (2) LED Indicator BUSY : ON —Power ON ON-AND-OFF (Slow) —TOC reading condition & Eject condition ON-AND-OFF (Fast) —Reading disc and accessing condition. OFF—Power OFF WRITE : ON —Recording condition OFF —Others (3) EJECT key The disc is taken out using this key. This key is available even when the tray is moving.
Page 22 Document No. Document Name (2/3) Function Description 3. Data write processing (1) Write speed i. CD-R ×4, ×8, ×16, ×20, ×20 ~ ×40 (ZCLV) write speed are applicable. (mastering write) ii. CD-RW ×4, ×10 , ×12 (CLV), write speed are applicable. Arbitrary speed can be set using the ATAPI command.
Page 23 Document No. Document Name (3/3) Function Description 4. Servo/access (1) Servo Automatic Adjustment When the disc is loaded, the focus, tracking offset and servo gain are adjusted automatically. (2) Sled Control using the Stepping Motor Driving The mechanisms and circuits related to the sled are simplified. The micro step operation is controlled using the micro computer when the access-time-specific trapezoidal driving occurs and the read/write operation is performed.
Page 24 Document No. Document Name Handling Manual (1/1) (1) Installation of the device driver In order to use this product, the device driver for the CD-R drive has to be installed. Before using this product, install the device driver according to the device driver "Install Manual" attached to the “OS” or “Mother Board”. (2) Connection to the audio equipment When the sound is played back though your stereo amplifier, connect the stereo mini plug of the cable to the headphone terminal of this product.
Page 25 Document No. Document Name Notes for Handling (1/6) 1. Don't look at the laser beam. Don't look at the laser beam source. If the laser beam hits your eyes, it might cause damage to your eyes. 2. Don't use deformed or cracked CDs. Don't use cracked, deformed CDs or CDs repaired with adhesives. As the disc turns with high speed within the product, broken pieces might scatter and hurt you. 3. Don't touch the inside components of this product. Don't disassemble or modify this product.
Page 26 Document No. Document Name Notes for Handling (2/6) 8. Maintenance (1) The dirt on this product should be cleaned off lightly with a soft cloth with some water or diluted neutral detergent. (2) Make sure not to use volatile chemicals such as benzine and thinner, because they might cause deformation and color change of the product. 9. Notes for the Handling of the Disc. (1) When you carry the disc, don’t touch the side where no letters are printed.
Page 27 Document No. Document Name Notes for Handling (3/6) (2) USB 2.0 PCI board Company Product No. Ratoc SYSTEN REX-PCIU2, REX-CBU2 MELCO INC. IFC-USB2P Adaptec INC AUA-3100LP, AUA-5100 Orange Micro Orange USB 2.0 Hi-Speed PCI Board Orange USB 2.0 Hi-Speed Card Bus PC Card ATEN International IC-250U 5 port USB2.0 PCI Host Controller IC-230U / USB 2.0 Low Profile PCI card (3 ports) (3) AC Adaptor Company Product No.
Page 28 Document No. Document Name Notes for Handling (4/6) Dimensions The following items should be considered when enclosure chassis for this drive is designed. 1. Over 5 mm space should needed between top of drive and enclosure chassis. 2. Don’t press the production label even if there are any reasons. SANYO Electric Co., Ltd.
Page 29 Document No. Document Name Notes for Handling (5/6) Package SANYO Electric Co., Ltd.
Page 30 Document No. Document Name Notes for Handling (6/6) Package Configuration GROSS WEIGHT 12 kg 160 unit 1 pallet: 4 box × 4 stack (16 box) Pallets are to be banded and stretch-wrapped. Corner strips are attached. SANYO Electric Co., Ltd.