User's Guide

2.4G Wireless Mouse Receiver

SANWA RC9A

FCC ID: 2AMSURC9A

Manufacturer：Dongguan Togran Electronics Co., Ltd

Address：No.262, Shi Dan Rd., Juzhou, Shijia Town,

Dongguan City, Guangdong, China

User Guide

How to pair USB radio dongle with the mouse

1. Plug the USB radio dongle into the USB port of the target device.

2. Press left+middle+right keys on the mouse. The LED will start

blinking

3. Place the mouse close to the USB radio dongle (no farther than

10 cm).

4. After successful pairing, the LED will go off.

How to use USB radio dongle with the mouse

1. Plug the USB radio dongle into the USB port of the target device.

2. Press any key on the mouse to activate connection to the USB

radio dongle.

PAGE 1
2.4G Wireless Mouse Receiver SANWA RC9A FCC ID: 2AMSURC9A Manufacturer：Dongguan Togran Electronics Co., Ltd Address：No.262, Shi Dan Rd., Juzhou, Shijia Town, Dongguan City, Guangdong, China User Guide How to pair USB radio dongle with the mouse 1. Plug the USB radio dongle into the USB port of the target device. 2. Press left+middle+right keys on the mouse. The LED will start blinking 3. Place the mouse close to the USB radio dongle (no farther than 10 cm). 4. After successful pairing, the LED will go off.
PAGE 2
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.