User's Manual

-1-
Package Contents
Specifications
User Manual
1 x Numeric Keypad
1 x USB Charging Cable
1 x User Manual
1 x Warranty Card
Get it Started
Step 1. Push ON/OFF button on the back to power on the keypad,
the LED indicator will flash in green color. Several seconds
later,it will flash blue.
Step 2. Long Press for 3 seconds, the keypad will enter pairing
mode.The blue indicator will start to rapidly flash.
Step 3. On the device, select: Settings- Bluetooth-On.
Step 4. The device will display “ SANWA KBD GNTBT1 ” as an
available device.
Step 5. Select “ SANWA KBD GNTBT1 ” on your device, click on it,
the keypad will now be paired to device and the Bluetooth
indicator will be off.
1. Try to pair them again if pairing operation is failed.
2. Num lock key press operation is only applicable for windows
OS ( Apple OS is not adaptive). For Android user, the Num lock
indicator will not light up,but still function normally.
Note :
Product Overview
① Bluetooth Pairing: Long Press for 3 seconds, the keypad will
enter pairing mode.
② Micro Charging Port: It locates at the top right corner, get it started
charging.
③ During working process, press Num Lock Key to shift numbers
typing and function operation on the frame area
(shown as the picture above)
-2- -3-
Bluetooth Specification
Operating Range
Dimension
Lithium Battery Capacity
Uninterrupted Work Time
Stand-by Time
Charge Time
Lithium Battery Life
Bluetooth 3.0
< 10 m / 32.8 ft
131.9x88.8x19.72 mm / 5.19 x 3.5 x 0.78 in
100 mAh
40 hours
30 days
1 hours
3 years
11
The function of pairing with iOS and Mac
For user of iOS and Mac, the following letters have no function.
FAQ
If you are unable to connect the keypad to your tablet, please try the
following:
1. Starting with a full charge on both devices ensures that process
won’t be interrupted by a low battery.
2. Make sure your tablet’s Bluetooth is on.
3. Make sure that the keypad is within the effective operation
distance of 33 feet (10 m).
Power Saving Mode
The keypad will enter sleep mode when idle for 30 minutes.
To re-activate it, press any key and wait for 3 seconds.
Charge it
1. This numeric keypad builds with 100mAh rechargeable lithium
battery. Please get it charged before first usage.
2. If the LED indicator on the top flashes in red color, please charge
the keypad in time via supplied micro USB charging cable.
(USB Charger is not included)
Home PgUp End PgDn Ins Del