M-6 3-CHANNEL 2. GHZ RADIO SYSTEM USER'S GUIDE ERA END POINT ADJUSTMENT Adjusting the Steering End Point Adjustment Percentage Values: Your model's turning radius can differ from left to right because of variations in linkage, suspension balance, tire diameter or weight distribution. In such cases, Left Steering servo travel and Right Steering servo travel are adjustable using the End Point Adjustment function. 1) Press the MENU UP or MENU DOWN keys to open the EPA menu.
M-6 3-CHANNEL 2. GHZ RADIO SYSTEM USER'S GUIDE EPA END POINT ADJUSTMENT Adjusting the Auxiliary Channel 3 End Point Adjustment Percentage Values: Auxiliary Channel 3 can be used for a number of different uses, One of the more common uses would be for the reverse function in a glow-powered monster ruck.
M-6 3-CHANNEL 2. GHZ RADIO SYSTEM USER'S GUIDE eat tat ne he Adjusting the Steering Exponential Percentage Value, Continued: 2) Press the INCREASE or DECREASE keys to change the Steering Exponential percentage value. Decreasing the Steering Exponential percentage value will make the steering less sensitive around Neutral and increasing the Steering Exponential percentage value will make the steering more sensitive around Neutral. EXP ST setting range is -100% (Mild) to 100% (Quick).
M-6 3-CHANNEL 2. GHZ RADIO SYSTEM USER'S GUIDE ALB -LOCKEAN BRAKING Activating the Anti-Lock Braking Function, Continued: 2) Press the INCREASE or DECREASE keys to choose the desired Anti-Lock Braking Pulse Rate value. The Pulse Rate value determines how fast the throttle servo pulsates the brake. Experimentation will be necessary to determine which Pulse Rate value to use. ALB setting range Is OFF, SLW (Slow), NOR (Normal) and FST {Fast}. The default setting is OFF.
M-6 3-CHANNEL 2. GHZ RADIO SYSTEM USER'S GUIDE TRIM -SERVO THIN Controlling the Servo Trim Function: 1) Steering and Throttle Serve Trim can be adjusted at any time while driving. Trim Switch Tram controls the Steering Right and Left Serve Trim and Trim Switch Tram controls the Throttle Forward and Brake Servo Trim. When you press the Trim Switches, the Serve Trim values change in 1° increments.
M-6 3-CHANNEL 2. GHZ RADIO SYSTEM USER'S GUIDE SLOB-TRIM After adjusting the Servo Sub-Trim values, use the End Point Adjustment function to set the desired amount of messieurs serve travel in both directions. For more information, see the End Point Adjustment section on pages 11 through 12. 1} Press the MENU UP or MENU DOWN keys to open the SUB-T menu. SUB-T will flash and ST 0 will be displayed.
M-6 3-CHANNEL 2. GHZ RADIO SYSTEM USER'S GUIDE NAME -MODEL NAMING The Model Naming function allows you to name sate of the 10 different models. This makes it easy to keep track of multiple models. The Model Name can consist upper-case letters, numbers or symbols, or a combination of all three, Before naming your model, use the Model Select function to choose the Model Number you would like to name. For more information, see the Mode! Select section on page 16.