M12 2.46GHZ FATAH RADIO CONTROL SYSTEM USER'S GUIDE Ne te RA] Introduction. Packaging. Service and Support Safe FCC Compliance Statement. 2 GHz Frequency Band Precaution; Transmitter Precautions. Receiver Precautions. Servo Connector: System Features What's Included. System Specifications. Transmitter Overview Diagrams Receiver Overview Diagram, Connections and Mounting Transmitter and Receiver Overview Diagram Descriptions. Transmitter Warning Alarms and LED Condition Indicators...
M12 246HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE EN If you have any questions or concerns, we're here to help. If you encounter a problem with your radio control system, first check the Troubleshooting Guide section on pages 97 ~98. f you require further jells, please contact us directly.
M12 2.46GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE EB.4GHZ FREQUENCY BAND PRECAUTIONS GENERAL + The 2.4GHz frequency band may he used by other devices, or other devices in the immediate ares may cause interference on the same frequency band, Always before use, conduct a bench test to ensure that the serves operate properly. Also, conduct checks with the transmitter as distant as possible from your Model. « The response speed of the receiver can be affected if used where multiple 2.
M12 2,4GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE SYSTEM FEATURES: + 4-Channel GHz 4TH Digital High-Response Telemetry System with Advanced Programming Includes RX-471 2.
M122.46HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE TRANSMITTER OVERVIEW DIAGRAMS Use the diagrams in this section to familiarize yourself with the layout of your transmitter. Descriptions of these features can be found in the Transmitter and Receiver Overview Diagram Descriptions section on pages 8 ~ 9. The transmitter antenna is mounted internally anc is located in the vertical back portion of the carrying handle.
MI2 GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE TRANSMITTER OVERVIEW DIAGRAMS PC-Link Input (Under Cover) Charge Jack Switch Arms* Switch Swa* LEFT SIDE VIEW / DICTA HIGH RESPONSE TELEMETRY System {J “Shorthanded Use Battery Compartment Push-Button Rotary Dias Racing Mode LEI (Up/Down/Enter Key) LED LEG 2 Back Key Select Switch LCD Screen £ Display Key Throttle Trigger Position Adjustment Screw Wrist Strap Anchor Slot \wist Strap Anchor Slot Eo i REAR VIEW FRONT VIEW
M12 2.4AGHZFHAT RADIO CONTROL SYSTEM USER'S GUIDE RECEIVER OVERVIEW DIAGRAM, CONNECTIONS AND MOUNTING Use the diagrams in this section to make receiver connections and to familiarize yourself with the RX-471 4-Channel 2.4GHz FH4 Super Response receiver included with your M12 radio control system, Descriptions of the features can be found in the Transmitter and Receiver Features Descriptions section below and on the next page Nina owl Swish An Dry Col Gator Hold, Glow/Gas {Es a 4.80 = 7.
M122.46GHZFHAT RADIO CONTROL SYSTEM USER'S GUIDE TRANSMITTER AND RECEIVER OVERVIEW DIAGRAM DESCRIPTIONS Back Key: Pressing the BACK key returns the Programming Cursor to the previous menu. Press the BACK key repeatedly to datum to the STATUS screen. Battery Compartment: Houses the four "AR Alkaline cells tha power the transmitter, Alternatively, the transmitter can be powered using four ‘AA Ni-Cd or Ni-MG rechargeable batteries or & 25 Li-Pa or Li-Fe battery pack.
M12 2.46HZ TRADITION CONTROL SYSTEM USER'S GUIDE TRANSMITTER WARNING ALARM DANDLED CONDITION INDICATORS. The M12 is equipped with several different Audible Warning Alarms to warn you of an abnormal transmitter condition. In addition, LED 1, LED 2 and the R-MODE LED are used to indicate various transmitter conditions at a glance. Audits Warning Alarms The audible alarms listed below may also be accompanied by an on-screen warming.
M12 2.46GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE TRANSMITTER BATTERY OPTIONS GENRE AL The M12 transmitter's Operating Voltage Range volts. This allows you to use several different battery options (not included), depending on your preference. Alkaline In the default configuration, the transmitter is designed to be powered using four ‘AA Alkaline batteries.
M12 2.46HZ 4TH RADIO CONTROL SYSTEM USER'S GUIDE STEERING WHEEL AND THROTTLE TRIGGER SPRING TENSION ADJUSTMENT GENERAL The spring tension of the Steering Wheel and Throttle Trigger can be adjusted 10 best suit the user. Sure users may prefer the Throttle Trigger and/or Steering Wheel to feel “firmer and same users may prefer thee to feel ‘softer’ It all depends an your personal preference.
M12 2.46GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE OPTIONAL STEERING WHEEL INSTALLATION An optional larger diameter Steering Wheel is included to best suit the user, Some user's feel that the larger diameter Steering Wheel makes the Steering operation seam finer, To install the optional lager diameter Steering Wheel, follow the steps below: 1) Use a 7mm nut driver to remove the Steering Wheel retaining nut, then pull the Steering Wheel straight off.
MI122.46H2Z 4TH RADIO CONTROL SYSTEM USER'S GUIDE THROTTLE TRIGGER POSITION ADJUSTMENT The position of the Throttle Trigger can be adjusted forward or backward to change the feel of the Throttle Trigger during use. Sore users may prefer the Th rattle Trigger positioned farther forward and some users my prefer the Throttle Trigger positioned farther back. It all depends on your personal preference.
M12 2.4GHZ FHA4AT RADIO CONTROL SYSTEM USER'S GUIDE OPTIONAL STEERING WHEEL ANGLE PLATE INSTALLATION. Two optional Steering Wheel angle plates (one Right and ane Left) are included that angles the position of the Steering Wheat and Trim Switch assembly. Some users may find that angling the Tearing Wheel to the Right or Left may be mots comfortable during use. Rand 'L' are molded into the angle plates to differentiate them.
M12 24GHZFHAT RADIO CONTROL SYSTEM USER'S GUIDE DIVING POSITION ADJUSTMENT The position of the Steering Wheel can be switched from the Right side to the Left side to accommodate Left handed drivers, This makes the M12 much more comfortable for natural Left handed drivers to use.
M12 2.46HZ FATAH RADIO CONTROL SYSTEM USER'S GUIDE PROGRAMMING KEYS OVERVIEW AND FUNCTIONS Moving around the various screens and programming the transmitter is accomplished using the ENTER key (Push-Vuitton Rotary Dial), the SELECT switch and the BACK key, PRO TIP: While navigating Programming Menus and changing Programming Values, keep the following in mind: to choose a menu from the STATUS screen, use the SELECT switch. To open a menu, press the ENTER key.
M12 2.4GHZFH4AT RADIO CONTROL SYSTEM USER'S GUIDE the information in this section to familiarize yourself with the layout and different indicators and displays that comprise the STATUS screen. The STATUS screen displays all pertinent information, such as the Model Name, Matriculation Type, Timer, Voyage and much more.
MI224GHZFHA4T RADIO CONTROL SYSTEM USER'S GUIDE Fe gre STATUS Screen Overview Diagram Descriptions, Continued... On-Time indicator: Displays the current cumulative On-Time of the transmitter in Hours and Minutes. Racing Mode Indicator: Indicates whether Racing Mode is Active or Inhibited and Which Racing Mode Active. RF Indicator: Indicates whether the transmitter is sending an RE signal or not. Steering and AUX 2 Trim Display: Displays the current position of Steering Trim and Auxiliary 2 Trim.
M12 2.4GH2Z GHAT RADIO CONTROL SYSTEM BRUISER'S GUIDE MAIN MENUS OVERVIEW. The four rain menus described in the previous section all share the same basic layout as Illustrated below, Use this information to familiarize yourself with the layout and the information presented Racing Made Indicator System indicators Model Number — ot Programming Mrs CB ENTRY EATER Br SETUP fia CAR TYPE > 1 NORMAL Current Main Menu: Displays the currently Active main menu, either SYSTEM, SETUP, RACING or CUSTOM.
M12 246GHZFHAT RADIO CONTROL SYSTEM USER'S GUIDE TELEMETRY. CHECHEN OVERVIEW. The TELEMETRY screen displays Telemetry Data, such as RPM or Speed, Temperature, Receiver Voltage and more. For information about making Telemetry option changes that effect how and what Telemetry Data is displayed on the various TELEMETRY pages, see the LOG SETUP Menu section an pages 48 ~ 56. Telemetry integration requires the Use of an Astronautics 2.
M12 2.4GHZFH4T RADIO CONTROL SYSTEM USER'S GUIDE TELEMETRY SCREEN OVERVIEW TELEMETRY Screen Overview Diagram Descriptions, Continued... Page Indicator: Indicates the currant Page within the Telemetry Data Stream that Telemetry Data is currently being displayed on. Receiver Voltage Display: Displays the current Voltage of the receiver battery. The tick mark indicates the current Voltage relative to the programmed Maximum Voltage value RPM/Speed Display: Displays the current RPM or speed in MPH or KM/H.
M12 2.4GHZFHATRARIO CONTROL SYSTEM USER'S GUIDE TRANSMITTER AND RECEIVER BINDING The Binding function allows you to Bind the transmitter and receiver pair. When naw, it js necessary to pair the transmitter and receiver to prevent interference farm transmitters operated by either users. This operation is referred to as ‘Binding. Once the Binding procedure is complete, the setting is remembered even when the transmitter and receiver are muted OFF, therefore, this procedure usually only needs to be done once.
M12 2.46HZFHAT RADIO CONTROL SYSTEM USER'S GUIDE SYSTEM MENU OVERVIEW. To access the various SYSTEM Programming Menus, tum the transmitter ON, then press the SELECT switch to highlight the SYSTEM menu. Press the ENTER key to open the SYSTEM menu. Scroll UP or DOWN to highlight the desired Programming Menu, then press the ENTER key to open that menu.
MI122.46HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE TYPE MENU (CAR TYPE TEMPLATES] SYSTEM ROB SRN REE) Car TYPE > EER Choosing a Car Type, Continued: 2) Press the ENTER Key to open the TYPE menu, The cursor will default 1o CAR NORMAL TYPES CHL | CH2 | CH3 | CH4 ST | TH [AUX | AUX [RE 3) Press the ENTER key, sen scroll UP or DOWN to Select the desired Car Type || mia ha i) as shown in the table below.
M12 2.46HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE ele a mF NC wha Selecting a Model, Continued: 2) Press the ENTER key to open the MODEL menu. The SELECT menu will be highlighted and the currently Selected Mode! will be displayed in brackets at the top of the Model Select List 3) Press the ENTER kay fo open the SELECT menu, then scroll UP or DOWN within the Model Select List to highlight the Model you would like to oad Programming Data for. 4) Press the ENTER key. MODEL SELECT OK? NO/YES will be displayed.
M12 2. GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE MUSKOGEE MENU SELECT, NAME, GORY; BANGLE SORT Entering a Model Name, Continued... MAL1LMODEL~01 3) Pres the ENTER key to open the NAME menus The underscore wil be positioned || BBE DEF GHI KLEIN under the first character in the bode! Name. RSTUUWXYZ.. Press the SELECT switch RIGHT or LEFT or scroll UP or DOWN 0 move the || @bCdefahiJdkimnars underscore under the character you want to change, then press the ENTER key. || PS LUVWXYZ 6123456788.
M12 2.4GHZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE MOREL MENU (SELECT, NAME, CONY, CLEAR'AND SOOT) Copying Model Programming Data, Continued. 3) Press the ENTER key to open the COPY menu, The currently Selected Model will be displayed in brackets above the Mods Copy Ust. Scroll UP or DOWN within the Model Copy List to highlight the Model you wale like to copy the current Mabel's Programming Data TO. 4 oa Press the ENTER key. MODEL COPY OK? NOYES will be displayed.
M12 2.AGHZFHATRABDIO CONTROL SYSTEM USER'S GUIDE MODEL MENU {SELECT NAME, CORY; CLEAR AND BOT) Model Sort The Model Sort function allows you to change how your Models are displayed in the Model Select List by allowing you to swap the currently Selected Motel with other Models. For example, you might want to Sort your Models 50 that your most frequently used Models are at the op of the Model Select List, or you might want to Sort your Models by type, such as crawlers, on-pad, etc.
M12 GHZ FHA RADIO CONTROL SYSTEM USER'S GUIDE DMS MISDIRECTION MODEL SELECT) Eh 3 Ce Changing Direct Model Select Models: 1) From within the SYSTEM menu, scroll UP or DOWN to highlight the DMS menu.
M122.46HZ GHAT RADIO CONTROL SYSTEM USER'S GUIDE SYSTEM BUNG MEN (BINDING, MODULATION TYRE SAFETY LINK AND SERVO MODE) Changing the Modulation Type, Continued... 4) Press the ENTER key. SET TO FH? (or the Modulation Type you Selected) NO/YES will be displayed, Scroll UP or DOWN to highlight YES, then press the ENTER key. If you want to go back and change the Modulation Type or if you don't want to change the Modulation Type for any reason, choose NO or press the BACK key.
MI122.4d6HZFH4AT RADIO CONTROL SYSTEM USER'S GUIDE BIND MENU (BINDING, MODULATION TYRE, SAFETY. LINK AND SERVO MODE) NTR RNS, MODULATION > GHAT Surety LING D1 ate see Ones Orn poe fe EEE Ho yo USSR CH > NOR H3> NOR CH NOR BIND [ENTER] Changing the Servo Operating Mode, Continued, 2) Press the ENTER key, then scroll UP or DOWN to chose the desired Servo | HER EHS aaa para as SRB] Operating Mode value for that channel.
M12 BAGHDAD RADIO CONTROL SYSTEM USER'S GUIDE ASSIGN MENU {SWITCH; DIAL AND LEVER FUNCTION ASSIGNMENTS] The ASSIGN menu allows you to Assign different functions to each of the three Push-Button Switches, the five Trim Switches, the Auxiliary Dial and the Auxiliary Lever. Each of the three Push-Button Switches can have wip to two functions Assigned fo it and the ON/OFF behavior can be changed.