User's Guide
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE table of contents general Packaging............................................................................................................. 2 Programming Overview and Functions............................................ 13 Service and Support........................................................................................ 3 Display Screens Overview.................................
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE general This is a high-output, full-range radio control system that should well exceed the range needed for any surface model. For safety, the user should perform a range test at the area of operation to ensure that the radio control system has complete control of the model at the farthest reaches of the operational area.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE general 2.4ghz frequency band precautions • The 2.4GHz frequency band may be used by other devices, or other devices in the immediate area may cause interference on the same frequency band. Always before use, conduct a bench test to ensure that the servos operate properly. Also, conduct checks with the transmitter as distant as possible from your model.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE system features general • 4-Channel 2.4GHz FH4T Digital High-Response Telemetry System with Advanced Programming and SSL Support • Large LCD Screen Features STATUS, ASSIGN and TELEMETRY Screens with Optional White GENERAL • High-Power FH4T Technology Provides the Best Reception and Connectivity, Giving Racers Added Assurance • Includes 2S 6.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE transmitter overview diagrams general Use the diagrams in this section to familiarize yourself with the layout of your transmitter. Descriptions of these features can be found in the Transmitter and Receiver Overview Diagram Descriptions section on pages 8 ~ 10. During use, hold the transmitter so that its orientated as close to vertical as possible at all times.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE receiver overview diagram, connections and mounting general Use the diagrams in this section to make receiver connections and to familiarize yourself with the RX-472 2.4GHz FH4T Super Response SSL receiver included with your EXZES ZZ radio control system. Descriptions of the features can be found in the Transmitter and Receiver Features Descriptions section below and on the next two pages.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE transmitter and receiver overview diagram descriptions general Battery Compartment: Houses the 2S Li-Fe battery pack that powers the transmitter. Bind Button: Used in the process of Binding the transmitter and receiver. Bind LED: Displays the current operating status of the receiver. Coaxial Cable: The portion of the receiver antenna that extends the Antenna Reception Wire.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE transmitter and receiver overview diagram descriptions general Trim Switches: The transmitter features five separate Trim Switches - four positioned around the Steering Control Stick (Trm1, Trm2, Trm3 and Trm4 and one positioned below the Auxiliary Lever (Trm5). Each Trim Switch is programmable and will perform a different function depending on what function is assigned to it.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE transmitter led condition indicators and warning alarms general Audible Warning Alarms The Low Voltage Alert alarm will sound when the transmitter batteries reach the Low Voltage Alert alarm voltage value programmed in the SYSTEM > BATTERY menu. The alarm will sound each time the transmitter battery voltage decreases by 0.1 volt. To clear this alarm, press the BACK key or the ENTER key.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Gimbal angle adjustment general The angle of the throttle and steering gimbals can each be adjusted to suit your preference. This allows for the most comfortable feel during use. To adjust the gimbal angles, follow the steps below: A A 1) Using a 2mm hex wrench, loosen the four mounting screws (A) around the perimeter of the gimbal you would like to adjust.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE programming keys overview and functions general PRO TIP: While navigating Programming Menus and changing Programming Values, keep the following in mind: to choose a menu from the STATUS screen, use the SELECT switch. To open a menu, press the ENTER key. To choose an option to program, scroll UP or DOWN to highlight the desired option, then press the ENTER key.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE display screens overview general Use the information in this section to familiarize yourself with the layout and different indicators and displays that comprise the STATUS screen. The STATUS screen displays all pertinent information, such as the Model Name, Modulation Type, Timer, Voltage and much more.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE display screens overview general STATUS Screen Overview Diagram Descriptions, Continued: Racing Mode Indicator: Indicates whether Racing Mode is Active or Inhibited and which Racing Mode (R1 through R5) is Active. RF Indicator: Indicates whether the transmitter is sending an RF signal or not. Trim Display: Displays the current position of channel Trim. Trim Indicators (ST, AUX1, etc.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE menus overview general Each of the menus described in the previous section all share the same basic layout as illustrated below. Use this information to familiarize yourself with the layout and the information presented.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE telemetry screen overview general For information about making Telemetry option changes that effect how and what Telemetry Data is displayed on the various TELEMETRY pages, see the LOG SETUP Menu section on pages 50 through 60. Telemetry integration requires the use of an Sanwa 2.4GHz FH4T Telemetry-capable surface receiver or SSL-compatible ESC (e.g. Super Vortex series ESC).
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE telemetry screen overview general TELEMETRY Screen Overview Diagram Descriptions, Continued: Numerical Telemetry Data: Displays the Telemetry Data in a numerical format. Page Indicator: Indicates the current Page within the Telemetry Data Stream that Telemetry Data is currently being displayed on. Receiver Voltage Display: Displays the current Voltage of the receiver battery.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE general The Binding function allows you to Bind the transmitter and receiver pair. When new, it is necessary to pair the transmitter and receiver to prevent interference from transmitters operated by other users. This operation is referred to as 'Binding'.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE basic Mode menu overview BASIC The EXZES ZZ features a BASIC Mode that simplifies transmitter use. The accompanying BASIC menu contains some of the more common, general-use Programming Menus that a user will require for basic programming.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE system menu overview system To access the various SYSTEM menu Programming Menus, turn the transmitter ON, press the SELECT switch to highlight the SYSTEM menu, then press the ENTER key to open the SYSTEM menu. Scroll UP or DOWN to highlight the desired Programming Menu, then press the ENTER key to open that menu. BASIC Mode must be turned OFF to access the SYSTEM menu.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE type menu {Car Type templates} system Choosing a Car Type, Continued: 2) Press the ENTER key to open the TYPE menu. The cursor will default to CAR TYPE > I. 3) Press the ENTER key, then scroll UP or DOWN to Select the desired Car Type as shown in the table below.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Model menu {Select, name, copy, clear, sort and Template} system Selecting a Model, Continued: 2) Press the ENTER key to open the MODEL menu. The SELECT menu will be highlighted and the currently Selected Model will be displayed in brackets at the top of the Model Select List.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Model menu {Select, name, copy, clear, sort and Template} system Entering a Model Name, Continued: 3) Press the ENTER key to open the NAME menu. The underscore will be positioned under the first character in the Model Name. 4) Press the SELECT switch RIGHT or LEFT or scroll UP or DOWN to move the underscore under the character you want to change, then press the ENTER key.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Model menu {Select, name, copy, clear, sort and Template} system Copying Model Programming Data, Continued: 3) Press the ENTER key to open the COPY menu. The currently will be displayed in brackets above the Model Copy List. 4) Scroll UP or DOWN within the Model Copy List to highlight the model you would like to copy the current Model's Programming Data TO. 5) Press the ENTER key.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Model menu {Select, name, copy, clear, sort and Template} system Model Sort The Model Sort function allows you to change how your models are displayed in the Model Select List by allowing you to swap the currently Selected Model with other models.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Model menu {Select, name, copy, clear, sort and Template} system Copying a Model Template: 1) From within the MODEL menu, scroll UP or DOWN to highlight the TEMPLATE menu. 2) Press the ENTER key to open the TEMPLATE menu. The Template List will be displayed and the currently Selected Model will be displayed in brackets at the bottom of the Template List.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE dms menu {direct Model Select} system The DMS function allows you to choose up to three different models that can be selected when turning the transmitter ON. Simply press a key while turning the transmitter ON and the Programming Data for your favorite model will load automatically. Using the Direct Model Select Function: 1) Make sure that the transmitter is turned OFF.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Bind menu {Binding, Modulation type, safety link and Response Mode} system Changing the Modulation Type, Continued: 1) From within the SYSTEM menu, scroll UP or DOWN to highlight the BIND menu. 2) Press the ENTER key to open the BIND menu. MODULATION > FH4T will be highlighted. 3) Press the ENTER key, then scroll UP or DOWN to select the desired Modulation Type.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Bind menu {Binding, Modulation type, safety link and Response Mode} system Changing the Channel Response Mode: The Channel Response Mode function is used to change the Response Mode of each channel to suit the type of servos you're using.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE SERVO menu {servo monitor} system Using the Servo Monitor: 1) From within the SYSTEM menu, scroll UP or DOWN to highlight the SERVO menu. 2) Press the ENTER key to open and view the full screen Servo Monitor. The hash marks represent the current channel output positions.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Assign menu {switch, dial, lever and Telemetry function assignments} system Changing the Push-Button Switch Function Assignments, Continued: 2) Press the ENTER key to open the ASSIGN menu. The SWITCH menu will be highlighted. 3) Press the ENTER key to open the SWITCH menu. SW1 [FUNCTION 1] > OFFSET will be highlighted.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Assign menu {switch, dial, lever and Telemetry function assignments} system Changing the Switch Mode: The ON and OFF behavior of each Push-Button Switch can be changed to suit the programmed function and your specific requirements.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Assign menu {switch, dial, lever and Telemetry function assignments} system Changing the Trim Switch Function Assignments, Continued: 4) Scroll UP or DOWN to highlight the Trim Switch Number you would like to change. Choose from TRM1, TRM2, TRM3, TRM4 or TRM5. 5) Press the ENTER key, then scroll UP or DOWN to choose the desired function for the Trim Switch Number you highlighted.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Assign menu {switch, dial, lever and Telemetry function assignments} system Changing the Trim Switch Direction of Travel, Continued: 2) Press the ENTER key, then scroll UP or DOWN to change the desired Trim Switch Reverse value. REV setting range is NOR and REV. The default setting is NOR. 3) Repeat step 2 to change any other desired Trim Switch Reverse values.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Assign menu {switch, dial, lever and Telemetry function assignments} system Changing the Auxiliary Dial Direction of Travel: The direction that the Auxiliary Dial moves the servo or function value can be changed from Normal to Reverse. In Normal mode, the Auxiliary Dial will move the servo toward the High Side or Increase a function value when the Auxiliary Dial is turned clockwise.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Assign menu {switch, dial, lever and Telemetry function assignments} system Changing the High and Low Tweak Values, Continued: 1) From within the LEVER menu, scroll UP or DOWN to highlight LEVER [TWEAK (H)] > +100. 2) Press the ENTER key, then scroll UP or DOWN to choose the desired High Side Tweak value.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Assign menu {switch, dial, lever and Telemetry function assignments} system Changing the Telemetry Push-Button Switch Control Function and Mode Values: Follow the information in this section if you've programmed the Telemetry value to SW. If you've programmed the Telemetry value to TRIM or LEVER, please refer to those specific sections.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Assign menu {switch, dial, lever and Telemetry function assignments} system Changing the Telemetry Trim Switch Control Function, Step and Reverse Values, Continued: A multitude of different functions can be Assigned to the Telemetry Trim Switch.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE BUZZER menu {audible key Tones and alarms} system Changing the Audible Tones: 1) From within the SYSTEM menu, scroll UP or DOWN to highlight the BUZZER menu. SYSTEM 2) Press the ENTER key to open the BUZZER menu. CLICK [TONE1] > 1 will be highlighted. 3) Scroll UP or DOWN to highlight the Function Tone Number you would like to change.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE vibrator menu {vibration alerts and alarms} system Adjusting the Vibration Level: 1) From within the SYSTEM menu, scroll UP or DOWN to highlight the VIBRATOR menu. 2) Press the ENTER key to open the VIBRATOR menu. VIB LEVEL > 4 will be highlighted. 3) Press the ENTER key, then scroll UP or DOWN to choose the desired Vibration Level value.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE lcd menu {display options} system Changing the LCD Contrast: 1) From within the SYSTEM menu, scroll UP or DOWN to highlight the LCD menu. 2) Press the ENTER key to open the LCD menu. CONTRAST > 15 will be highlighted. 3) Press the ENTER key, then scroll UP or DOWN to choose the desired Contrast value.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE aux type menu {Auxiliary channel operating mode} system The Auxiliary Type function allows you choose the Operating Mode for Auxiliary 1 and Auxiliary 2, making it possible to change the way these two Auxiliary channels function. This section details how to change the Operating Mode of the two Auxiliary channels.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Trim type menu {servo Trim type} system The Trim Type function allows you choose the way servo Trim and servo End Point Adjustments interact with each other. When you apply Trim to a servo, the Neutral Point of the servo shifts toward the High Side or the Low Side.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE th type menu {Throttle bias ratio} system Two Throttle Types are available: F70:B30 - When selected, the Throttle Neutral Point is shifted toward the Brake Side which provides more High Side servo travel (70%) and less Brake Side servo travel (30%). This is most common for general-use and racing.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Calibration menu {Control Calibration adjustment} system The steps required to calibrate the operation of the Steering Control Stick, Throttle Control Stick and Auxiliary Lever are the same. The example shown in this section details calibrating the Steering Control Stick.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Calibration menu {Control Calibration adjustment} system Calibrating the Steering, Throttle and Auxiliary Lever Controls, Continued: 7) Slowly move the Steering Control Stick (or Throttle Control Stick or Auxiliary Lever) all the way in one direction.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE batt menu {Low voltage alert and limit alarms} system Changing the Low Voltage Alert Alarm Value: The Low Voltage Alert alarm will sound to indicate the transmitter battery is getting low and should be recharged. We suggest stopping use as soon as safely possible and recharging the transmitter battery.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE batt menu {Low voltage alert and limit alarms} system Changing the Throttle Slow Value: The Throttle Slow function allows you to variably limit Throttle channel travel when both the Low Voltage Alert and Low Voltage Limit alarms sound to slow the maximum speed of your model, making is safer to operate until you are able to stop and recharge the transmitter battery.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {Telemetry display and Recording options} system Turning Telemetry Data Recording ON and OFF, Continued: 2) Press the ENTER key to open the LOG SETUP menu, then scroll UP or DOWN to highlight the REC menu. 3) Press the ENTER key to open the REC menu. REC > ON will be highlighted. 4) Scroll UP or DOWN to choose the desired Record value, either ON or OFF.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {Telemetry display and Recording options} system Changing the Maximum Scale Value, Continued: 2) Press the ENTER key, then scroll UP or DOWN to change the Maximum Scale value. This value determines the maximum RPM, MPH or KM/H value that will be displayed on the TELEMETRY screen ALL and RPM pages. MAX SCALE setting range is 500 to 127500 RPM, 1 to 999 MPH and 1 to 999 KM/H.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {Telemetry display and logging options} system Calibrating the RPM Sensor - Changing the 10Count Distance Value, Continued: 1) With your transmitter and receiver turned ON, and with an Active Telemetry connection, place your model on the ground.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {Telemetry display and logging options} system 4) Press the ENTER key, then scroll UP or DOWN to choose the desired Maximum Voltage value. This value determines the Maximum Voltage that will be displayed on the TELEMETRY screen VOLT page and also calibrates the VOLT Indicator on the TELEMETRY screen ALL page.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {Telemetry display and logging options} system Changing the Telemetry Name, Continued: 2) Press the ENTER key to open the LOG SETUP menu, then scroll UP or DOWN to highlight either the TLM1 or the TLM2 menu depending on which of the two Telemetry Ports you want to make changes to. In this example, we've selected the TLM1 menu.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {Telemetry display and logging options} system Changing the Rate and the Offset Values, Continued: The Rate and Offset values don't need to be changed if you're using a Temperature Sensor plugged into the TMP1 and/or TMP2 Telemetry Ports on the RX-461 or RX-462 receivers.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {Telemetry display and logging options} system Changing the Minimum Value: The Minimum value determines the Minimum Telemetry Parameter Data value that will be displayed on the TELEMETRY screen TLM1 or TLM2 page and also calibrates the Low Side of the TLM1 or TLM2 Indicator scale on the TELEMETRY screen ALL page.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {display only Telemetry options} system When only the DISPLAY is turned ON using the DISPLAY key, the EXZES ZZ can be placed in Receiver Mode, allowing it to Bind with another Sanwa FH3 or FH4T transmitter and read Telemetry Data from it.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {display only Telemetry options} system Steering and Throttle Output Data Display Adjustments The Steering Point and Throttle Point functions allow you to calibrate the TELEMETRY screen ALL page Steering and Throttle Output Data Displays, so the Output Data displayed matches your paired transmitter's Steering Control Stick and Throttle Control Stick movement.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE log setup menu {display only Telemetry options} system Calibrating the Throttle Output Data Display, Continued: 4) Press the ENTER key. The TH POINT menu will be displayed and NEUTRAL POINT > 127 will be highlighted.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE user name menu {Transmitter user naming} system Entering a User Name, Continued: 5) When you return to the STATUS screen, your User Name will be displayed above the EXZES ZZ logo. Deleting a Character: 1) Press the SELECT switch RIGHT or LEFT or scroll UP or DOWN to move the underscore under the character in your User Name you want to delete.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE PC LINK {SAVE TRANSMITTER DATA AND UPDATE FIRMWARE} system Saving the Telemetry Data Log, Continued: 2) Press the ENTER key to open the PC LINK menu, then scroll UP or DOWN to highlight the SAVE LOG menu. 3) With the PC LINK Manager 3 software running and the transmitter connected, press the LOG SAVE TX > PC button on the PC LINK Manager 3 software.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE PC LINK {SAVE TRANSMITTER DATA AND UPDATE FIRMWARE} system Loading Model Programming Data The Load Model function allows you to Load Model Programming Data from your PC onto your transmitter.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE PC LINK {SAVE TRANSMITTER DATA AND UPDATE FIRMWARE} system Saving a Model Template, Continued: 5) Press the ENTER key. PC RECEIVE TEMPLATE SAVE OK? NO/YES will be displayed. 6) To select the Model Template you want to Save, press the SELECT switch Right or Left. 7) Scroll UP or DOWN to highlight YES, then press the ENTER key. PC START will be displayed.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE PC LINK {SAVE TRANSMITTER DATA AND UPDATE FIRMWARE} system Before proceeding, download and save the latest Firmware version to a convenient location on your PC. Updates (when available) can be downloaded from the EXZES ZZ product page at http://www.sanwa-denshi.com. WARNING: The Update process will take approximately 5 to 10 minutes.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE information menu {firmware version, Boot Screen, and Basic Mode} system Resetting the On-Time, Continued: 2) Press the ENTER key to open the INFORMATION menu. ON TIME > 00:00 (or the actual Cumulative On-Time) will be highlighted and the current Firmware version will be displayed. 3) Press and HOLD the ENTER key to Reset the ON TIME to 00:00.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE setup menu overview Setup To access the various SETUP menu Programming Menus, turn the transmitter ON, press the SELECT switch to highlight the SETUP menu, then press the ENTER key to open the SETUP menu. Scroll UP or DOWN to highlight the desired Programming Menu, then press the ENTER key to open that menu. BASIC Mode must be turned OFF to access the SETUP menu.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE epa menu {channel end point adjustments} setup Changing the Channel End Point Adjustment Percentage Values, Continued: 2) Press the ENTER key to open the EPA menu. The cursor will default to either ST > L100% or ST > R100%. 3) Scroll UP or DOWN to highlight the desired End Point Adjustment percentage value you would like to change.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE sub Trim menu {servo centering} setup Changing the Servo Sub-Trim Values, Continued: 2) From within the SETUP menu, scroll UP or DOWN to highlight the SUB TRIM menu. 3) Press the ENTER key to open the SUB TRIM menu. The cursor will default to ST > 0. 4) Scroll UP or DOWN to highlight the desired Sub-Trim value you would like to change.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE rev menu {servo reversing} setup 3) Scroll UP or DOWN to highlight the desired Servo Reversing value you would like to change. 4) Press the ENTER key, then scroll UP or DOWN to change the Servo Reversing value. Choose from either NOR (Normal) or REV (Reverse). 5) Press the ENTER key, then repeat steps 3 and 4 to change any other desired Servo Reversing values.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE point aux2 menu {auxiliary 2 Point Values} setup The Point Auxiliary function allows you to program the Auxiliary 2 servo to move up to 6 different Points along its travel, then cycle through those Points using one of the Trim Switches or the Rotary Dial.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE moa mix menu {motor on axle Mixing} setup Choosing the Motor on Axle Power Distribution Values: You are able to program Dig and Burn functions by changing the Power Distribution between the two motors. When both Front and Rear values are balanced, Dig and Burn functions are Inhibited. 1) From within the SETUP menu, scroll UP or DOWN to highlight the MOA MIX menu.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE 4ws mix menu {Four Wheel Steering Mixing} setup The Four Wheel Steering Mixing function provides you with two Steering channels. It allows you to control either the Front or Rear Steering independently or Mix the Front and Rear Steering to have Parallel Four Wheel Steering (Crab) or Tandem Four Wheel Steering.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE 4ws mix menu {Four Wheel Steering Mixing} setup Controlling the Four Wheel Steering Mixing Function: 1) In order to control the Four Wheel Steering function, the 4WS MIX function must be Assigned to either one of the five Trim Switches or the Auxiliary Dial. For more information, see the ASSIGN Menu section on pages 31 through 40.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE f /s {fail safe} setup Choosing the Fail Safe Settings: 1) From within the SETUP menu, scroll UP or DOWN to highlight the F/S menu. 2) Press the ENTER key to open the F/S menu. ST > FREE will be highlighted. 3) Scroll UP or DOWN to highlight the desired channel you would like to change the Fail Safe value for.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE b - f /s {receiver battery voltage fail safe} setup Choosing the Receiver Battery Voltage Value, Continued: 2) Press the ENTER key to open the B-F/S menu. VOLT (RX) > OFF will be highlighted. 3) Press the ENTER key, then scroll UP or DOWN to choose the desired Receiver Battery Voltage value. Many factors, such as the current draw of your servos and how many servos you're using, etc.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE LAP TIMER menu {view lap times and choose lap timer options} setup Setting the Goal Time: When the Lap Timer is counting Up, a long audible Tone will sound when the Goal Time is reached. For example, if you set the Goal Time value for 5 Minutes, a long audible Tone will sound when the Lap Timer reaches 5 minutes.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE LAP TIMER menu {view lap times and choose lap timer options} setup Stopping the Lap Timer: 1) To Stop the Lap Timer, press and HOLD the Lap Timer Switch for 3 seconds. An audible Double-Tone will sound and LAP [STOPPED] will be displayed momentarily in a pop-up window, indicating the Lap Timer is stopped. The Cumulative Time cannot be manually cleared.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE int1 and int2 menu {interval 1 and interval 2 timers} setup Choosing the Optional Throttle Control Stick Start, Continued: 1) From within the INT1 menu, scroll UP or DOWN to highlight START TRIGGER > OFF. 2) Press the ENTER key, then scroll UP or DOWN to choose the desired Start Trigger value, either ON or OFF. INT1 and INT2 START TRIGGER setting range is OFF and ON.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE down menu {countdown timer} setup Setting the Finish Time, Continued: 2) Press the ENTER key to open the DOWN menu. FIN TIME > 60' will be highlighted. 3) Scroll UP or DOWN to highlight the desired Finish Time value you would like to change, either 00' (Minutes) , 00" (Seconds) or 00 (1/100th Seconds). 4) Press the ENTER key, then scroll UP or DOWN to choose the desired Finish Time value.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE racing menu overview racing To access the various RACING Programming Menus, turn the transmitter ON, press the SELECT switch to highlight the RACING menu, then press the ENTER key to open the RACING menu. Scroll UP or DOWN to highlight the desired Programming Menu, then press the ENTER key to open that menu. BASIC Mode must be turned OFF to access the SETUP menu.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE r-mode menu {racing mode} racing In the default configuration, after Activating the Racing Mode function, you can switch between Racing Modes using the Racing Mode Switch (Trim Switch Trm3). The R-MODE LED will change color to indicate the currently Active Racing Mode (see table on previous page). In addition, the currently Active Racing Mode will be displayed on the STATUS screen.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE D /R menu {Dual Rates} racing The Dual Rate function allows you to change the control authority of the Steering, Throttle High Side and Throttle Brake Side by changing the amount of servo travel relative to control input. For example, by Increasing the Steering Dual Rate, you can make the Steering servo travel more, which might prevent your model from pushing during turns.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Trim menu {servo Trim} racing The EXZES ZZ features Digital Trim Memory. Any amount of Trim that you set during use using the Trim Switches or through the TRIM menu is automatically stored in memory for that specific channel and for that specific model. The Trim values for each model will automatically be loaded when the transmitter is turned ON.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Curve menu {exponential, adjustable rate control and Curve} racing Changing the Rate Percentage Value, Continued: You are able to adjust the Rate percentage value for the Throttle High Side and the Throttle Brake Side separately. In addition, you can even program Exponential for one side and ARC or Point Curve for the other side.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Curve menu {exponential, adjustable rate control and Curve} racing Choosing the Channel and the Curve Type, Continued: 2) Press the ENTER key to open the CURVE menu. The < ST > channel will be selected. 3) Press the SELECT switch RIGHT or LEFT to choose the desired channel you would like to program ARC for. 4) From within the CURVE menu, scroll UP or DOWN to highlight the TYPE > value.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE Curve menu {exponential, adjustable rate control and Curve} 100% P7 P8 P9 Amount of Servo Operation P6 N P5 Quick P3 P2 Point Curve percentage values can be adjusted from Mild through Linear to Quick to allow you to set the most effective control response for your model.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE speed menu {servo speed} racing The Servo Speed function allows you to slow the transit speed of the Steering, Throttle, Auxiliary 1 and Auxiliary 2 channels. When driving your model, proper Steering and Throttle control are vital. For example, lowering the transit speed of the Steering servo can help to limit excessive Steering, which will enable you to achieve smoother cornering.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE speed menu {servo speed} racing Changing the Point Percentage and IN and OUT Values: The Point percentage value determines where along either side of servo travel that the servo's transit speed will be changed. The IN and OUT values determine whether the change in servo transit speed occurs between the two points (IN) or outside the two Points (OUT). See the diagram on the previous page.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE alb menu {anti-lock Braking} racing Changing the Stroke Percentage Value: The Stroke percentage value determines the amount of Brake that's applied automatically when the Anti-Lock Braking function is turned ON. A Stroke percentage value of 1% or greater must be programmed for the Anti-Lock Braking function work. If a Stroke value of OFF is chosen, the Anti-Lock Braking function will not work.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE alb menu {anti-lock Braking} racing Changing the Lag Value: The Lag value determines the amount of Delay before the Anti-Lock Braking function Activates after reaching the Point setting. 1) From within the ALB menu, scroll UP or DOWN to highlight LAG > 0.00s. 2) Press the ENTER key, then scroll UP or DOWN to choose the desired Lag value in Seconds.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE offset menu {Throttle offset} racing Changing the Brake Lock Percentage Value: When a Car Type that features a separate Brake channel (Car Type II, III, IV,VI or VII) is selected, the Brake Lock function can be programmed to apply Brake to keep your model from moving while the Throttle Offset Position is increased.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE TH-HLD menu {Throttle hold} racing The Throttle Hold function moves the Throttle servo to a fixed position, either toward the High Side or the Brake Side, and is used primarily with glow- or gas-powered models. For example, if you're driving a glow- or gas-powered boat, you can use can the Throttle Hold function to stop your engine with only the press of a button.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE TH-HLD menu {Throttle hold} racing Changing the Brake Lock-Out Value, Continued: If your Car Type features two separate Brake channels, such as Car Type IV, the Brake Lock-Out function will affect both Brake channels equally. 1) From within the TH-HLD menu, scroll UP or DOWN to highlight BR > ON.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE c-mix1 and c-mix2 menu {compensation Mixing 1 and compensation Mixing 2} racing Available channels vary based on the Car Type currently chosen. The table below shows the available channels for each Car Type. See also the second table below that describes the Channel Output Data of each of these channels. Channels denoted with a Pound sign (#) can be selected only as Master channels.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE c-mix1 and c-mix2 menu {compensation Mixing 1 and compensation Mixing 2} racing Changing the Master Channel, Continued: 2) Press the ENTER key to open the C-MIX1 menu. MASTER > ST will be highlighted. 3) Press the ENTER key, then scroll UP or DOWN to choose the desired Master channel. Changing the Slave Channel: 1) From within the C-MIX1 menu, scroll UP or DOWN to highlight SLAVE > TH.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE T-mix1 and T-mix2 menu {telemetry Mixing 1 and telemetry Mixing 2} racing Currently TMP1, TMP2, VOLT and RPM Master Telemetry Data options are available. As different types of Telemetry Sensors are developed, these will be added as Master Telemetry Data Options in future firmware updates. Available Slave channels vary based on the Car Type currently chosen.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE T-mix1 and T-mix2 menu {telemetry Mixing 1 and telemetry Mixing 2} racing Changing the Rate 1 and Rate 2 Percentage Values: The Rate percentage values determine the amount and direction of Slave channel servo travel. Use a Positive or Negative percentage value to change the amount and direction of travel.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE acker menu {ackerman angle adjustment} racing The Ackerman function allows you to change the Steering Angle of the front tires independently to prevent the tires from slipping during turns. Being able to change the Ackerman Angle can help improve your model's high-speed cornering and improve tire wear.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE R-dly menu {racing mode Delay} racing The Racing Mode Delay function allows you to program a Delay for each of the four channels to help prevent drastic changes in channel function settings when switching between Racing Modes. For example, you might have one Dual Rate setting for Racing Mode 1 and a different Dual Rate setting for Racing Mode 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE codeax1 and codeax2 menu {Code auxiliary 1 and code auxiliary 2} racing This section covers both the Code Auxiliary 1 and Code Auxiliary 2 menus, since programming each of them is exactly the same. Choose either the CODEAX1 or the CODEAX2 menu depending on which of the two Code Auxiliary functions you want to program.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE custom custom menu overview The following Programming Menus are available within the CUSTOM menu: MENU CH-SET MENU DESCRIPTION Adjust Programming Values for Common Functions in One Convenient Location ch-set menu {channel set menu} PAGE # PG.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE ch-set menu {channel set menu} custom Adding Programming Menus to the CUSTOM Menu, Continued: 1) Highlight the Programming Menu you would like to add to the CUSTOM menu. 'C' ENTRY will be displayed in the Message Display Window. 2) Press the SELECT switch in the direction of the arrow (LEFT).
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE glossary of terms REFERENCE Ackerman Angle: An engineered value that allows the inner tire to turn at a sharper angle than the outer tire to prevent the tires from slipping during turns. Activate: To turn ON a particular function.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE glossary of terms REFERENCE Code Auxiliary: The Code Auxiliary function is used with SSL-compatible accessories, such as a Super Vortex series ESC, whose Programming Parameters can be changed directly via the transmitter. Compensation Mixing: Used to create your own custom Mixes that allow you to control any number of desired functions in different combinations.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE glossary of terms REFERENCE Grip: The Grip is molded from rubber in an ergonomic shape for increased comfort, control and feel. High Side: Refers to the Throttle Control Stick stroke that opens the Throttle and powers your Model (pulling the Throttle Control Stick).
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE glossary of terms REFERENCE Page Indicator: Indicates on the TELEMETRY screen the current Page within the Telemetry Data Stream that Telemetry Data is currently being displayed on. Parallel (Crab) Steering: Used with Four Wheel Steering, both Front and Rear wheels pivot right and left together.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE glossary of terms REFERENCE Status Screen: Displays information about the transmitter and is the base from which you access other Programming Menus. Steering Output Display: Displays on the TELEMETRY screen the current position of the Steering channel as a percentage of Steering Control Stick travel. Steering Response Mode LED: Displays the currently Active Steering Response Mode.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE glossary of terms REFERENCE Trim Step Resolution: Adjusts how far the servos travel when the Trim Switches are pressed. You can increase the resolution, so that the servos travel less when you press the Trim Switches. This makes it possible to fine-tune the settings extremely accurately.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE index REFERENCE B Brake Side, Definition of 110 Burn, Adjusting and Controlling 72 Burn, Definition of 110 Buzzer Menu, Overview 40 Buzzer Menu.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE index L LED Condition Indicators, Table of Transmitter Conditions 10 Li-Fe Battery Pack, Charging Li-Fe Battery Pack, Installing 11 Log Setup, Overview 50 Log Setup.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE index REFERENCE N Next Programming Menus, Definition of 16 Next Programming Menus, Diagram of 16 Nominal Input Voltage, Receiver Specification 5 Nominal Input Voltage, Transmitter Specification 5 Normal Channel Response Mode. See Channel Response Mode Normal Channel Response Mode, Definition of 112 O Offset. See Throttle Offset ON/OFF Switch.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE index REFERENCE T Throttle Control Stick Spring Tension, Changing 12 Throttle Control Stick, Using to Start the Countdown Timer 80 Throttle Control Stick, Using to Start the Interval Timer 78 Throttle Control Stick, Using to Start the Lap Timer 77 Throttle Type, Changing the Throttle Type 46 Throttle Type, Overview 45 Transmitter and Receiver Binding.
EXZES ZZ Telemetry System with Sanwa Synchronized Link Support 2.
EXZES ZZ T Telemetry System with Sanwa Synchronized Link Support 2.
SANWA ELECTRONIC INSTRUMENT CO., LTD. All contents 2015 Sanwa Electronic Instrument Co., LTD.
