LLL1 Instruction Manual Para Español ver página 22 WE’RE HERE TO HELP Want to watch a video that shows how easy this DIY project will be? Watch it now at: SANUS.com/2839 Recommended placement Check it out at: SANUS.com/2850 Get it right the first time. HeightFinder™ shows you where to drill. Our US-based install experts are standing by to help.
IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS Before getting started, let’s make sure this mount is perfect for you! 1 Does your TV (including accessories) weigh MORE than ... 100 lbs. (45.3 kg) 135 lbs. (61.2 kg) 135 lbs. (61.2 kg) for Drywall for Wood studs for Solid concrete or concrete block? Wood studs? Solid concrete or concrete block? ... No? = Per fect! ...Yes? = This mount is NOT compatible. Visit: MountFinder.Sanus.
Drywall 3 Do you have all of the tools needed? Applications Pencil NO DRILL OPTION Hammer Included Wood Stud Tape Measure Applications Electric Drill Square Driver Bit Screwdriver 4 Ready to begin? Awl 1/8 in. (3.2 mm) Wood Drill Bit Included Concrete Applications Stud Finder Electric Drill Square Driver Bit Hammer 5/16 in. (8 mm) Masonry Drill Bit Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. Parts and Hardware [for STEP 1] 01 TV Screws (qty. 2 each) [Only one size fits your TV] 02 Washer qty.
Parts and Hardware [for STEP 2] Parts [for STEP 3] (OPTIONAL) Standoff* Locking Mechanism KEEP IN THE LOCKED POSITION until instructed. (Magnetic Leveling Foot) LOCKED UNLOCKED 09 qty.2 Wall Plate 05 Disc qty.1 (Adhesive backed) 10 Built-in Level Washer Wood Screw (Wood Screw) 07 06 qty. 2 qty.2 For DRYWALL installations ONLY CAUTION: FOR STEP 2A ONLY: Do not use in concrete or plaster & lath. 08 qty.32 Nail 14 ga. x 1 ¼ in. (Wall Plate) FOR STEP 2B and STEP 2C ONLY #10 x 2 ½ in.
1 1.1 Attach TV Bracket to TV Select TV Screw Diameter NOTE: Only one screw size fits your TV. M6 M8 1.2 Determine TV Screw Length A B • Flat Back TV • Rounded Back TV • Extra Space Needed spacers 03 are not necessary. [for cables or inset holes] Use spacers 03 to create extra space between the TV and TV bracket. CAUTION: Verify adequate thread engagement with your screw/ washer/spacer combination AND TV Bracket 04 . - Too short will not hold the TV. - Too long will damage the TV.
1.3 If your TV included inset spacers or wall mount adapters, use them UNDER the mount hardware.
2 Attach Wall Plate to Wall Follow the corresponding step for your installation method. IMPORTANT: You must determine your wall construction to correctly secure the wall plate to the wall. DRYWALL [ TVs up to 100 lbs. (45.
WOOD STUD [ TVs up to 135 lbs. (61.2 kg)] SOLID CONCRETE and CONCRETE BLOCK [ TVs up to 135 lbs. (61.2 kg)] STEP 2B STEP 2C on PAGE 12 on PAGE 14 CAUTION: Avoid potential personal injuries and CAUTION: Avoid potential personal injuries and property damage! property damage! Two stud centers must be located for proper installation. The mount must be installed directly onto the concrete surface (no surface covering).
2A 2A.1 DRYWALL (only) INSTALLATION [ TVs up to 100 lbs. (45.3 kg)] Verify Your Wall Min. 3/8 in. (9.5 mm) 2A. 2 1 Attach the Wall Plate OUTER HOLE 2 08 OUTER HOLE 08 05 05 CAUTION: Avoid potential personal injuries and property damage! ●Drywall ● covering must be 3/8 in. (9.5 mm) or greater ●Drywall ● must be mounted on studs, no more than 24 in. (609 mm) on center, [minimum stud size: nominal 2 x 4 in. (51 x 102 mm) actual 11/2 x 31/2 in.
3 08 (qty. 30) 05 IMPORTANT: Alternate installing the remaining thirty (30) nails 08 from side to side. CAUTION: Avoid potential personal injuries and property damage! Thirty-two (32) nails 08 total, must be used in wall plate Go to STEP 3 on PAGE 16. 05 .
2B 2B.1 WOOD STUD INSTALLATION [ TVs up to 135 lbs. (61.2 kg)] Verify Your Wall Min. 3 1/2 in. (89 mm) 2B.2 Attach the Wall Plate 1 2 Min. 1 1/2 in. (38 mm) Max. 5/8 in. (16 mm) Min. 16 in. (406 mm) 05 CAUTION: Avoid potential personal injuries and property damage! ●● Drywall covering the wall must not exceed 5/8 in. (16 mm) ●● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 11/2 x 3 1/2 in. (38 x 89 mm) ●● Minimum horizontal space between fasteners: 16 in.
3 4 05 2 1/2 in. (63 mm) 1/8 in. (3.2 mm) Drill 1/8 in. (3.2 mm) pilot holes. IMPORTANT: Holes must be drilled to a depth of 2 1/2 in. (63 mm) — in the center of the stud. 07 06 and washers 06 11 Install wall plate with screws . CAUTION: Improper use could reduce the holding power of screws 07 . DO NOT over-tighten the screws. Go to STEP 3 on PAGE 16.
2C 2C.1 SOLID CONCRETE / CONCRETE BLOCK INSTALLATION [TVs up to 135 lbs. (61.2 kg)] Concrete Installation Kit is required [NOT INCLUDED] Contact Customer Service 1-855-734-7805 for kit #CMK3. 2C.2 Verify Your Wall Min. 8 in. (203 mm) 1 Attach the Wall Plate 05 Min. 8 in. (203 mm) Min. 16 in. (406 mm) Solid Wall Block Wall Min. 16 in. (406 mm) CAUTION: Avoid potential personal injuries and property damage! ●Minimum ● solid concrete thickness: 8 in.
2 3 4 C1 05 2 ¾ in. (70 mm) 11 5/16 in. (8 mm) Drill 5/16 in. (8 mm) pilot holes. IMPORTANT: Holes must be drilled to a depth of 2 ¾ in. (70 mm). Never drill into the mortar between blocks. Insert anchors C1 (Fischer UX8 x 50R – included in the Concrete Installation Kit ) CAUTION: Be sure the anchors are seated flush with the concrete surface. C1 07 06 Install wall plate 05 with screws and washers 06 .
3 3.1 Attach TV to Wall Plate Unlock the Wall Plate 3. 2 Hang Your TV HEAVY! You may need assistance with this step. IMPORTANT: DO NOT lower TV straight down onto wall plate 05 -- this will engage the lock. Safety latch must be released for proper installation (See STEP 3.1).
3.3 Lock the Wall Plate CAUTION: Avoid potential personal injury or property damage! The locking mechanism must be locked, so the TV is securely fastened to the wall plate 05 .
3. 4 A No Tilt Feature (OPTIONAL) 03 10 09 09 B For non-metal back TVs, use adhesive disc 10 . 10 09 03 10 09 18 09 09 09 09 For non-metal back TVs, use adhesive disc 10 .
Manage Cables Adjustments SIDE-TO-SIDE SHIFT 05 CAUTION: Avoid potential personal injury or property damage! CAUTION: Avoid potential personal injury or property damage! DO NOT force open your TV when adding cables. STOP lifting the bottom outward when you feel resistance. FOR DRYWALL INSTALLATIONS: DO NOT slide the TV side-to-side. Slide the TV side to side to adjust positioning. NOTE: Safety stops prevent over-shifting. Make sure your TV is locked to wall plate 05 (STEP 3.3).
Adjustments LEVEL [Wood Stud and Concrete Installations] REMOVE THE TV HEAVY! You may need assistance with this step. Loosen 07 05 Loosen Tighten Tighten 1. Disconnect your cables. 2. Unlock wall plate 05 (STEP 3 .1). 3. Lift the TV up and away from wall plate 1. 2. 3. 4. 20 Remove the TV. Loosen both screws 07 . Adjust the level. Retighten both screws 07 . 05 . CAUTION: Avoid potential personal injuries and property damage! DO NOT reuse this product after removing wall plate 05 from the wall.
Dimensions ( in. [mm] ) TV INTERFACE 3-D 24.61in 625mm MAX 1.54in 39.1mm 2.95in 75mm MIN WALL PLATE TOP VIEW - TV MOUNTED 3-D WALL IS ON TOP 17.72in 450mm 2.28in 57.9mm 23.62in 600mm WALL IS ON RIGHT 16.00in 406.4mm SIMULATED 60" FLAT SCREEN TV 24.00in 609.6mm FULLY ASSEMBLED MOUNT TOP VIEW SIDE VIEW 25.50in 647.7mm 2.84in 72.3mm 1.18in 29.9mm 3.40in 86.4mm 3.40in 86.
ESPAÑOL INSTRUCCIONES IMPORTANTES DE SEGURIDAD: GUARDE ESTAS INSTRUCCIONES Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, asegurémonos de que este soporte sea perfecto para usted. 1 ¿Su televisor (incluidos los accesorios) pesa más de? 45,3 kg (100 lbs. Para paneles de yeso 61,2 kg (135 lbs.) 61,2 kg (135 lbs.) Para montantes de madera Para hormigón macizo/paredes de bloques de hormigón ... No = ¡Perfecto! ...Sí = Este soporte NO es compatible. Visite MountFinder.
3 ¿Tiene todas las herramientas necesarias? Paneles de yeso Lápiz Martillo Incluido Madera Cinta métrica Taladro eléctrico Broca de desarmador cuadrada Localizador de montantes Punzón 3,2 mm (1/8 pulgadas) Madera Broca Incluido Hormigón Destornillador 4 ¿Listo para comenzar? Taladro eléctrico Broca de desarmador cuadrada Martillo 8 mm (5/16 pulgadas) Hormigón Broca Revise estas instrucciones para estar seguro de sentirse cómodo con este sencillo proceso de instalación.
ESPAÑOL Piezas y Elementos Ver PÁGINA 4 ADVERTENCIA: Este producto contiene piezas pequeñas que podrían causar asfixia si se tragasen. Antes de comenzar a ensamblar la unidad, verifique que todas las piezas estén incluidas y en buen estado. En caso de que falten piezas o alguna esté dañada, no devuelva el elemento defectuoso al distribuidor. Póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas en mal estado. NOTA: No se utilizarán todos los elementos de sujeción incluidos.
PASO 2 Cómo fijar la placa a la pared Ver PÁGINA 8 ESPAÑOL IMPORTANTE: Debe determinar cuál es la construcción de su pared para asegurar correctamente la placa mural a la pared. Siga el paso correspondiente para la instalación de su placa mural. Siga el paso correspondiente a su método de instalación. INSTALACIÓN EN PANELES DE YESO (SOLO) Para televisores de hasta 45,3 kg (100 lbs.) PASO 2A en la PÁGINA 10 INSTALACIÓN EN MONTANTES DE MADERA Para televisores de hasta 61,2 kg (135 lbs.
ESPAÑOL PASO 2B Cómo fijar la placa a la pared OPCIÓN PARA MONTANTES DE MADERA Ver PÁGINA 10 2B,1 Verifique su pared PRECAUCIÓN: Evite posibles lesiones físicas y daños materiales. • La mampostería que cubre la pared no debe superar los 16 mm (5/8"). • Tamaño mínimo del montante de madera: común 51 x 102 mm (2" x 4") nominal 38 x 89 mm (1½" x 3½"). • Espacio horizontal mínimo entre los elementos de sujeción: 406 mm (16"). • Debe verificarse el centro del montante. 2B,2 Fije la placa de pared 1.
ESPAÑOL PASO 3 Cómo fijar el televisor a la placa de pared 3,1 Libere la placa de pared Ver PÁGINA 16 3,2 Cuelgue el televisor ¡PESADO! Necesitará ayuda para realizar esta operación. IMPORTANTE: NO baje el televisor dirigiéndolo directamente hacia la placa de pared seguridad debe estar liberado (Véase PASO 3,1). 05 : esto enganchará la pestaña de bloqueo. Para una instalación correcta, el pestillo de 3,3 Bloquee la placa de pared PRECAUCIÓN: Evite posibles lesiones personales o daños materiales.
Watch the installation video or call our Customer Care team for help SAN.US/2839 1-855-734-7805 Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.
