Thank you for purchasing the HyperDrive COLORSPACE O The HyperDrive COLORSPACE O is a high performance memory card backup device with a high resolution 3.2" color LCD screen. Supporting 11 different types of memory card formats, the COLORSPACE O has the world's fastest memory card backup speed at 25MB/s (backup 1GB in 1 minute) and an extremely long battery life (backup up to 120GB on a single battery charge). With unique features like 32-bit copy verification, built-in card/data recovery and hard drive S.
Safety Information Warning! Install only 18650 Li-Ion batteries from authorized HyperDrive sources. Installing other types of batteries may prevent the COLORSPACE O from operating properly and cause damage. Moreover, observe correct polarity when installing a battery. Incorrect polarity may prevent the COLORSPACE O from operating properly and cause serious damage if the battery short-circuits.
Table of Contents Basic Operation Nomenclature Keypad Operation Hard Drive Installation Orientation Sensor Battery Replacement Battery Charging Power On/Off 4 5 6 7 8 9 10 Memory Card Backup Common Backup Error Messages Backup Folder Name Backup Speed Copy Verification Visual Backup Recommended Settings 11 12 14 15 16 17 18 USB Connection to Computer USB Connection in Windows USB Connection in Mac OS 19 20 21 Photo Management Photo Browser Photo Browser Settings Photo Zoom EXIF Display Settings Photo
Nomenclature CompactFlash, MicroDrive Slot LED Indicator USB Socket Color LCD Screen DC Power Socket MS/SD/MMC Slot Keypad 4
Keypad Operation Turn on device Press and hold Turn off device Normal shutdown: Press button when at the main menu Forced shutdown: Press and hold button (when device is in vertical position) until the device shuts down.
Hard Drive Installation NOTE Refer to this section only if you have purchased a COLORSPACE O (casing only) without a hard drive installed or if you plan to upgrade or change the internal hard drive. Remove the screw on the back cover as illustrated. Slide the back cover in the direction of the arrow 18650 Li-Ion Battery 2.5" Hard Drive Hard Drive Connector Socket Use the appropriate 2.5" hard drive as recommended by your dealer. Ensure that the hard drive is set to Master mode.
Orientation Sensor HyperDrive COLORSPACE O features an orientation sensor which detects when you rotate the device from portrait (vertical) to landscape (horizontal) and automatically changes the contents of the display. If you wish, you can disable the orientation sensor and make the device operate exclusively in portrait or landscape mode.
Battery Replacement Your COLORSPACE O already comes with a battery installed. Refer to this section only if you are replacing the battery. Warning! If you insert the battery with the polarity incorrect, the device will not operate and under certain circumstances, may even damage the device. To replace the battery, remove the back cover, insert the new battery in the correct polarity and replace the back cover.
Battery Charging Connect the COLORSPACE O via AC adapter or USB power to charge the internal battery. The LED indicator will light up to indicate that the charging is in process. Once the battery is fully charged, the LED indicator light will dim or turn off. It will take approximately 2.5 hours (via AC adapter) / 5 hours (via USB) to full charge an almost empty battery.
Power On/Off To turn on the COLORSPACE O: Press and hold for 2 seconds, followed by . Press and hold this button for 2 seconds To turn off the COLORSPACE O: Press on the main menu Select the "Shutdown" function Alternatively, to force shutdown the device, press and hold down.
Memory Card Backup Insert a memory card into the appropriate slot on COLORSPACE O. Turn on COLORSPACE O by pressing and holding for 2 seconds. On the main menu, press ("Backup") to start the memory card backup process.
Common Backup Error Messages Fatal error during backup process: During the memory card backup process, if COLORSPACE O encounters an error which it is unable to resolve or ignore, a read error message window will immediately appear to inform you that the backup process cannot continue.
Common Backup Error Messages For the following 3 types of errors, it is possible to skip or ignore these errors and continue with rest of the memory card backup process. However, there may be data loss specially at the regions where the errors occurred.
Backup Folder Name Every time a memory card is backed up, COLORSPACE O will create a new folder in the root directory to store all the contents of the memory card. The default folder name is COLORXXX where XXX are incremental numbers, for example COLOR001, COLOR002, COLOR003 and so on. You can change this backup folder name from "COLOR" to something else.
Backup Speed COLORSPACE O automatically determines the optimal memory card backup speed by looking at the maximum read/write speed rating stated in the memory card BIOS (basic input/output system). However there are some rare cases where the memory card BIOS overstates this maximum speed rating and backup fails when COLORSPACE O transfers at a speed faster than what the memory card is capable of. This can happen with lesser known memory card brands or cards with defective or poor quality memory chips.
Copy Verification COLORSPACE O is able to perform data verification during the backup process. Each time a file is copied to the COLORSPACE O, the device compares the data on the hard drive against the data on the memory card to ensure that they are identical. Using copy verification can help to ensure data integrity.
Visual Backup Visual Backup is a new innovative feature that allows you to see the images as they download, thereby eliminating the need for subsequent visual confirmation of which images were backed up. To setup visual backup, from the main menu, select More> Settings> Visual Hard Drive: Display image thumbnail from the hard drive just after it is copied to the COLORSPACE O. This option also serves to confirm that the image has been copied to the COLORSPACE O.
Recommended Settings COLORSPACE O is an advanced system offering many ways to customize your settings. In order to simplify your setup process, we recommend the following settings catered to different situations.
USB Connection to Computer Use the provided USB cable to connect COLORSPACE O to the USB port on the back of the computer. USB port on the back of the computer Select "USB" in the main menu Note Connect only via the USB port on the back of your computer. Your computer may not detect COLORSPACE O if you connect via a USB extension cable or a USB hub.
USB Connection in Windows When Windows detects COLORSPACE O, it will appear as a "Removable Disk" in “ My Computer”. You can then access COLORSPACE O just like any ordinary hard drive. Drive Icon Safely Disconnecting COLORSPACE O from Windows Click on the “Safely Remove Hardware” icon and select “USB Mass Storage Device”. After Windows confirms that COLORSPACE O has been removed, unplug the USB cable. The COLORSPACE O screen will then return to the main menu.
USB Connection in Mac OS When Mac OS detects COLORSPACE O, a drive icon will appear on the desktop. COLORSPACE COLORSPACE Drive icon Safely Disconnecting COLORSPACE O from Mac OS Drag the COLORSPACE O removable drive icon to the trash bin to eject the device. Unplug the USB cable and the COLORSPACE O screen will return to the main menu. Note Please disconnect COLORSPACE O from the computer before shutting down or restarting the device. Otherwise, press to forcefully disconnect the USB connection.
Photo Management Photo Browser From the main menu, select Photo>Browser to enter the "Select Folder" screen. On the "Select Folder" screen, highlight a folder to preview the images within and press to view the folder contents.
Auto Realignment of Portrait / Landscape Display COLORSPACE O is able to detect the orientation of the device and change the screen display automatically so that you would see the photo or menu in its appropriate portrait or landscape aspect ratio Full screen portrait view of selected photo Note Full screen portrait view of selected photo This function may not work when the system is loading a new image file or if the system is busy.
Photo Zoom COLORSPACE O is able to zoom the photo to 100% (1:1) view.
Photo Rotation In full screen photo mode, press again to select Rotate to access the Photo Management Menu and press Rotate photo 90 degrees clockwise Note Rotate photo 90 degrees anticlockwise The photo is rotated for viewing purpose only. The actual file is not altered in any way. The file will return to its original orientation the next time you reopen it.
Photo EXIF Information In full screen photo mode, press to select EXIF. In the EXIF information page, press Note to access the Photo Management Menu and press / to scroll up/down the page respectively. Some photo files may not have any EXIF information. COLORSPACE O only display commonly used EXIF information and may not show all the EXIF information.
Photo Histogram In full screen photo mode, press to select Histogram. Note to access the Photo Management Menu and press Like most digital cameras, COLORSPACE O displays a luminance (brightness) histogram, which is useful for checking for proper exposure.
Photo Browser Settings Thumbnail Size COLORSPACE O is able to display multiple thumbnail images on a single page.
Thumbnail Image Cache When you view a photo full screen, COLORSPACE O will first display a low-resolution version while it is scanning in a high-resolution version to the display screen. At the same time, COLORSPACE O is obtaining all the necessary information required to allow zooming, EXIF and histogram display. Depending on the photo file size, this process typically takes between a few seconds to tens of seconds.
EXIF Display Settings From the main menu, select Photo>Settings>EXIF Setup Display EXIF at the top Display EXIF at the bottom No EXIF display COLORSPACE O will only display the basic EXIF information in full screen photo view. To view more detailed EXIF information, kindly refer to instructions on page 26.
Build Thumbs Every time a photo is being viewed full screen, COLORSPACE O will scan/load the photo to obtain all the necessary information required to allow zooming, EXIF and histogram display. Depending on the photo file size, this process typically takes between a few seconds to tens of seconds. In order to reduce loading times, you can create optimized 252KB "thumb" version of the photos for subsequent faster loading and viewing on the COLORSPACE O screen. From the main menu, select Photo>Build Thumbs.
Photo Search You can search for photos by date. From the main menu, select Photo>Search, enter the date and select the location to be searched. Switch between Year / Month input View photos Note Jump to next week COLORSPACE O will search for photos according to its modified date. If the photo has been modified by Photoshop or any image editing software, the modified date will be different from the date the photo was shot.
Photo Recovery COLORSPACE O is the only portable memory card backup device in the world to possess advanced photo recovery, which provides you with a simple and efficient way to recover photos from a deleted, formatted or corrupted memory card. The photos will be recovered to the COLORSPACE O hard drive. From the main menu, select More>Tools>Recover. Select "CF to HDD" if you are recovering from a CF/MD card. Otherwise select "Card to HDD". COLORSPACE O can recover a wide variety of image files.
Memory Card Tools CF Card Authenticity Verification COLORSPACE O can verify a CF (CompactFlash) memory card for authenticity to ensure that the card is made by the original manufacturer and is not an imitation. Insert a CF card into the COLORSPACE O. From the main menu, select More>Tools>Card Tools>Card Info. If COLORSPACE O identifies the CF card, an image of the card will appear on the screen. Refer to www.hyperdrive.com for a list of CF cards that COLORSPACE O can verify for authenticity.
Memory Card Erase COLORSPACE O can erase all the contents of a memory card. From the main menu, select More>Tools>Card Tools>Erase Card. Note COLORSPACE O cannot erase FAT12 formatted memory cards. In addition, erasing a card only erases all the data in the FAT table and all records of root folders. Erasing does not format a card.
Memory Card Scan & Repair Most digital camera memory cards use NAND flash memory. As the NAND flash has a usage lifespan of 20,000 times rewritable, some memory card sectors may become unusable over time. A digital camera will not operate properly with a defective memory card. COLORSPACE O is the only portable memory card backup device in the world with the ability to scan memory cards for errors and repair them if necessary.
Quick Scan and Standard Scan After you have setup the scan settings, you can start scanning the memory card. From the main menu, select More>Tools>Card Tools>Scan/Repair Quick Scan: This process will write in data and read out data from every sector of the memory card. The memory card is considered to be error-free if the write in and read out process is successful and the read/write data is consistent. All data in the memory card will be deleted in the process.
Scan Process and Results During the memory card scanning process, blue sectors are good sectors, red sectors are bad sectors and white sectors are sectors that have not yet been scanned or repaired. The flashing orange sector is the sector that is currently being scanned or repaired.
Advanced Functions File Management You can navigate and manage the files/folders in COLORSPACE O just like in any Windows or Mac OS environment and perform file/folder operations like Cut, Copy, Paste, Delete and Move files. Open file/folder operations menu Enter folder Delete the selected file/folder Paste clipboard contents to the current folder Copy the selected file/folder to clipboard Note COLORSPACE O cannot write or delete any file/folder on a FAT12 formatted memory card.
Hard Drive Formatting Warning! Only format the COLORSPACE O internal hard drive with the device itself. Using a computer or other means to format the COLORSPACE O hard drive may cause the device to malfunction and/or result in data loss. You must format the COLORSPACE O hard drive before you can use it. From the main menu, select More>Tools>Drive Tools>Format and then follow the on-screen instructions. Formatting a hard drive will completely delete all data on the drive.
Hard Drive Information From the hard drive information, you can view the S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) diagnostic information. Using this information, you can monitor the hard drive for potential problems, predict if the hard drive is about to fail and take preventive measures to protect your data if necessary. From the main menu, select More>Tools>Drive Tools>Information: S.M.A.R.T. Information Note The S.M.A.R.T.
Firmware Update From time to time, firmware updates will be released to improve upon the functionality and performance of the COLORSPACE O. Download the latest firmware update file from www.hyperdrive.com and copy the file to COLORSPACE O. You may need to unzip to obtain the firmware update file. From the main menu, select More>Settings>Firmware Browse to the firmware update file and press the top-left "Select" button.
Custom Background/Button Setup If you wish to use your own graphics for the COLORSPACE O wallpaper/background and button icons, you will need to enable this feature. From the main menu, select More>Settings>Interface Setup>Custom Icon>On. COLORSPACE O background image must be a 320 x 240 pixels bitmap .bmp file. Button icon images must be 32 x 32 pixels bitmap .bmp file. Refer to the table below for the filenames of the respective background and button icon images. File name Location BG.
File name 020-EARSE.bmp Location Main menu>More>Tools>Card Tools>Erase Card 021-CARDSCAN.bmp Main menu>More>Tools>Card Tools>Scan/Repair 022-RECOVER.bmp Main menu>More>Tools>Recover 023-BROWSER.bmp Main menu>Photo>Browser 024-SEARCH.bmp Main menu>Photo>Search 025-PREVSET.bmp Main menu>Photo>Settings 029-RESTORE.bmp Main menu>More>Settings>Reset 038-USERICON.bmp Main menu>More>Settings>Interface>Custom Icon 040-RETURN.bmp Back 055-UPDATE.bmp Main menu>Photo>Settings>Firmware 059-COPYSET.
Screen Brightness Adjustment and Screensaver To conserve energy and extend battery life, you can adjust the screen brightness and set the time for screensaver to activate. From the main menu, select More>Settings>Interface>Backlight The maximum brightness setting will consume 12% more energy than the minimum brightness setting . When the device battery power is low, you can set screen brightness to the minimum to extend the battery life.
Product Specifications Dimensions Weight LCD Display LCD Resolution Memory Card Slots Backup Speed Copy Verification Computer Interface USB Transfer Speed Battery Battery Voltage Battery Performance Power Hard Drive Capacity File System Operating System Operating Temperature Temperature Rate of Change Relative Humidity Altitude Included Accessories Optional Accessories 133 x 75 x 25mm / 5.24" x 2.95" x 0.98" 280g / 9.9oz (with HDD & battery) 3.