User Manual
FCC STATEMENT 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1).This device may not cause harmful interference. 2).This device must accept any interference received, including interference that may cause undesirable operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Sanho Manufacturer's Limited Warranty Sanho warrants to the end user, that this product, excluding content and/or software supplied with or on the product, will be free from material defects in manufacture, will conform to Sanho's published product specifications and be fit for normal use during the Warranty Period specified below commencing on the date of purchase provided that the product is legally placed on the market.
What's In The Box USB 2.0 Device (Input 5V / 1000mA) (Blue) Wi-Fi Indicator (Red) Low Battery (Green) (Orange) USB Mode Charging Indicator USB 2.
Replace Internal Flash Push to replace internal MicroSDXC Open the cover
Battery Charging The product package does not include a USB charger. We recommend that you use a 5V/1A USB charger to charge the battery. Charging Indicator (Orange) Low Battery Indicator (Red) Charging Port When the Low Battery Indicator light(red) is on, ' ' is on you should charge the iUSBport Mini .('LBI' . for 3 minutes,iUSBport will turn off automatically.) The Charging Indicator(orange) will blink during charging.
Connect To PC USB Mode Indicator (Green) When the USB Mode Indicator(Green) light is on, iUSBport Mini is recognized by your PC. The USB Mode Indicator will blink during data transferring. Do not disconnect iUSBport Mini when the green LED is blinking. Disconnecting may cause data to be damaged.
Enable Wi-Fi Wi-Fi Indicator (Blue) Push Wi-Fi power button for 2 seconds. Wait for 20 seconds until the Wi-Fi Indicator (Blue) starts to blink. Connect your Wi-Fi enabled device to iUSBport Mini according to next chapters.
Connecting To iUSBport Mini Go to "Settings" on your mobile device (e.g. iPad) Select "iUSBmini" from the list of Wi-Fi networks. iUSBmini Enter 'http://199.0.0.1' in the URL address bar of the web browser. The contents of the USB device will be displayed in the browser.
Standard Network Service List There are several standard network servers in iUSBport Mini, such as FTP, WebDAV and Samba servers. iUSBport Mini can be accessed by standard FTP, WebDAV or Samba client software. FTP, WebDAV and Samba servers support read and write operations if the storage device is 'FAT32' formatted . FTP Settings FTP IP address: 199.0.0.1(Master mode) FTP server TCP/IP port number: 21 FTP server user name: anonymous FTP server password: WebDAV Settings WebDAV IP address: http://199.
Specifications Model: iUSBport Mini USB Host Port: USB2.0 High Speed 480MBps USB Device Port: USB2.0 High Speed 480MBps Wireless: WiFi 802.