User Manual www.iusbport.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesirable operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Sanho Manufacturer's Limited Warranty Sanho warrants to the end user, that this product, excluding content and/or software supplied with or on the product, will be free from material defects in manufacture, will conform to Sanho's published product specifications, and will be fit for normal use during the Warranty Period specified below commencing on the date of purchase, provided that the product is legally placed on the market.
Content What's In The Box Battery Charging Connecting to Computer via USB Using iUSBport As USB Charger Using iUSBport As Wireless Storage Accessing iUSBportHD Storage Before Unplugging USB Mass Storage Device Normal Shutdown Changing SSID & Password Connecting iUSBport to an Existing WiFi Network Viewing Hard Drive S.M.A.R.T.
What's In The Box HDD Indicator WiFi Indicator USB 2.0 Host Port LCD Battery Indicator Micro USB 3.0 Device Port Power Button Micro USB Charging Port SDXC Slot Main Unit This User Manual Micro USB Charging Cable USB 3.
Battery Charging The product package does not include a USB charger. We recommend that you use a tablet (e.g. iPad) USB charger (5V/2.1A) to charge the battery. The battery indicator will light up orange during charging. When the battery is fully charged, the battery indicator will turn green. (~6hrs to full charge from empty) Battery Indicator USB Charger (This accessory is not included in the product package.
Connecting to Computer via USB Turn off iUSBportHD before connecting to computer via USB. USB Mod e We recommend using the USB cable provided with iUSBportHD. Tip The computer would not detect the iUSBportHD if it is turned on.
Using iUSBport As USB Charger iUSBport is able to function as a USB charger for a wide range of mobile devices. It outputs 5V,1A from its USB port, allowing it to charge USB devices like smartphone.
Using iUSBport As Wireless Storage Press power button and release it when the LCD lights up. Connect device to USB port Insert the SDXC card Wait for 30 seconds until WiFi indicator is flashing. LCD displays all system information. SD Card Icon USB Storage Icon HDD Icon HDD Working Battery Icon iUSBHD_xxx HDD Suspended 199.0.0.1 SSID Password (AP) AP Name (Client) Additional Information Go to "Settings" in your WiFi device (e.g. iPad, iPhone) Select from the list of WiFi networks.
Accessing iUSBportHD Storage Select "Safari" or any web browser on the WiFi device (e.g. iPad, iPhone) Enter 'http://199.0.0.1' in the URL address bar of the web browser. The contents of the USB device will be displayed in the browser. Partition Drives Settings Content Tip We recommend using Safari or Chrome browser as much as possible. Other browsers may not be able to display the full user interface.
Before Unplugging USB Mass Storage Device iUSB HD Sync _xxxx ... Press power button LCD will display "Sync ...
Normal Shutdown iUSB H Shut D_xxxx down ? Press power button LCD will display "Shutdown?" Press power button again iUSBportHD will calculate free disk space and display it on the LCD. 978.1GB [ 978.1GB ] Power Off iUSBportHD will keep the last display on the LCD after power off.
Changing SSID & Password Remember to change the default SSID password. Otherwise, unauthorized users will be able to access your iUSBport and its data. Click "Setting" icon and tap "SSID:" in setup page iUSBHD_xxxx Input new SSID & password: Tap "Save Change" and reboot iUSBport.
Connecting iUSBport to an Existing WiFi network If you want your mobile device (e.g. iPad, iPhone, smartphone, tablet, computer etc.) to access iUSBport and the Internet at the same time, you will need to connect iUSBport to an existing WiFi network. This mode is called "Infrastructure Mode". In this mode, you can access iUSBport with your mobile device and remain connected to the Internet at the same time.
Viewing Hard Drive Info Click "Setting" icon and hard drive info is shown in setup page. Calculate free disk space during power off Cache video file into internal SSD while iUSBportHD is streaming video. When video file was cached, HDD will be suspended to save power. Tap "Self-Monitoring" to view hard drive S.M.A.R.T info Tip S.M.A.R.T stands for SelfMonitoring, Analysis and Reporting Technology.
Options of iUSBportHD Click "Setting" icon and options is shown in setup page. "Enable HFS+ Writing" option used to remove journal from a HFS+ file system. So that you can upload files into a HFS+ storage device. "Admin Password" option allows you to setup a password to prevent unauthorized access to the setup page. NOTE: If you forgot password, you must reset iUSBportHD to the default setting. Create a blank file named 'clear_my_iusbport_password' in a USB flash.
Accessing iUSBport in Mac OS In the Finder Window, select 'Connect to Server' from the 'Go' menu. Enter the IP address of iUSBport (in the format smb://) in the 'Server Address' text box. The IP address is 199.0.0.1 by default or displayed on the iUSBport LCD screen. smb://199.0.0.1 Select 'Guest' and 'Connect' .
Accessing iUSBport in Windows Open 'My Computer' ; Enter the IP address of iUSBport in the address bar; My Computer NOTE! Add two backslashs before the IP address! The IP address is 199.0.0.1 by default or displayed on the iUSBport LCD screen. \\199.0.0.1 Click 'Go' or press Enter on the keyboard, and the iUSBport drive will show on the window. \\199.0.0.1 iUSBport-C Click 'iUSBport' to access the contents of iUSBportHD.
Standard Network Service List There are several standard network servers in iUSBportHD, such as FTP, DLNA, WebDAV and Samba servers. iUSBportHD can be accessed by standard FTP, DNLA, WebDAV or Samba client apps or software. FTP and Samba servers support read and write operation if the storage device is 'FAT32',"exFAT" or 'NTFS' formatted . FTP Settings FTP server IP address： 199.0.0.
Copying Memory Card to iUSBportHD iUSBportHD can copy memory card from a USB card reader or SD card slot to internal hard disk drive (FAT32 formatted). All files including photos and videos can be transferred into the iUSBportHD automatically. Connect USB card reader with memory card to iUSBportHD. Or insert SD/SDHC/SDXC card into iUSBportHD. If you insert two memory card into iUSBportHD, it will not copy those cards automatically.
Upgrading the Firmware The firmware of iUSBport can be upgraded to add new features and to address any software bugs. Download firmware which should be named IUSBHD.SEF Copy IUSBHD.SEF to the root folder of USB storage device. Insert this USB storage device into iUSBport, and it will display the following update message: Update V10 -> V11 ? Press power button once to start updating.
Specifications Model: iUSBportHD USB Port: USB2.0 High Speed 480MBps x 1 USB3.0 Super Speed 5GBps x 1 Card Slot: SD/SDHC/SDXC Slot x 1 Internal Flash: 8GB Wireless: WiFi 802.11b/g/n LCD: Mono STN 128*64 with backlight Charging Rate: DC 5V 1A ~ 2A Battery: 3850mAh Li-Poly Standard Accessories : Micro USB Charging Cable x 1 USB3.
iUSBportHD Designed in Silicon Valley, California by Sanho Corporation All rights reserved. Copyright 2013. Apple, iPad, iPhone are registered trademarks of Apple, Inc.
