RCR-5 D 中文 GB Revision 2
Important safety instructions 1. Read and understand all safety and operating instructions before the radio is operated. GB 2. Retain instruction: The safety and operating instructions should be retained for future reference. 3. Heed warnings. All warnings on the appliance and operating instructions should be followed. 4. Follow all operations and use instructions. 5. Water and moisture: The appliance should not be used near water.
9. Power sources: The radio should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your radio dealer or power company. 10. Power cords: The power cord should be positioned so it is not walked on, pinched, or items placed on top of it. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
14. Do not attempt to service the receiver yourself. Removing the cover may expose you to dangerous voltage, and will void the warranty. Refer all servicing to authorized service personnel. GB 15. Object and Liquid Entry-Never push objects of any kind into this radio through opening as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind of product. 16.
4
Controls Power on / off and Sleep Timer button 2 Band / Step button 3 NAP TIMER button 4 STATION PRESETS 5 TUNING Up / Down and Snooze 6 TIME SET / DISPLAY button 7 Alarm 2 button 8 Alarm 1 button 9 LCD Display 10 Volume Control knob 11 Headphones socket 12 AUX in 13 Display Backlight Adjustment button 14 Logo and specification mark 15 FM antenna 16 Power socket 1 GB LCD display A B C D E F G H Radio band and a.m. / p.m.
Operation Clock Setting (date and time) Clock time has to be set before alarm setting. 1. Press and hold the TIME SET button for more than 2 seconds, the display will show , and flash the year digits. 2. Press TUNING Up/Down button to set the year. 3. Press the TIME SET button, then use the same way to set the date. * press and hold the TUNING Up/Down button for fast-forward or fast-backward. 4. Press the TIME SET button to set the hour with TUNING Up/Down button.
Radio operation Turn on the radio with the POWER button. GB Tune into desired stations Station selection 1. Press the TUNING up/down button, to tune into the frequency of your desired stations 2. Scanning tuning- Press and hold the TUNING up/down button for more than 0.5 seconds and release, the radio will search for the next station. STATION PRESETS 1. Tune into the stations that you would like to store. 2.
Alarm Clock There are two alarms which can each be set to wake you to AM/FM radio or buzzer alarm. The alarms may be set while the unit is in standby mode or while playing. Ensure that the time is set correctly before setting the alarms. 1. Before setting an alarm ensure the clock time is set. Press and hold any of the Alarm button to enter the alarm setting (e.g. Alarm 1 button to enter the alarm 1 setting). 2. The hour setting of alarm 1, for example, will begin to flash.
4. Press the Tuning up/down to choose the required alarm type, and then press the Display/ Time set button to confirm the setting. The alarm can be set to buzzer, FM or AM. When radio mode is selected, the radio frequency on the display will begin to flash. Press the Tuning up/down to adjust the required radio frequency or the required preset number for the radio alarm, then press the Display/Time set button to confirm the setting. GB 5.
Snooze To interrupt the sounding alarm (radio or beep tone), press the SNOOZE button. The alarm stops and begins again with interval of 5 minutes. The alarm will continue for an hour whatever being interrupted. Nap timer With the NAP button, you can select the period for the short term alarm in 5 minutes steps from 5-120 minutes. The Nap timer starts when you release the key. NAP will appear on display. The alarm signal sounds after the period of time which you have set.
Calendar Display Press the TIME SET/DISPLAY button to see the date, and press it again to see the year. The display will go back to the clock in 10 seconds. 24/12 time format/Date format/FM AM step setting 1. Power off the radio. 2. Press and hold the BAND button for 4 seconds and the current software version will flash on the display (e.g. P07) 3. Continuing pressing and holding the BAND button until you hear the beep and the display will flash the current 24/12 time format.
AUX IN socket Plug in external audio devices such as CD player to the AUX IN socket (on the side of the radio), then play your device and press the BAND button repeatedly until you see “AU” on the display. The radio will amplify and play out the signal form your device. Headphones The radio provides a Headphones socket to connect the headphones set. When plug in the headphones, the speaker is disconnected.
Factory reset If your radio fails to operate correctly, or some digits on the display are missing/incomplete or you simply just want to restore to original factory setting, carry out the following procedure. GB 1. Power off the radio. 2. Press BAND button and preset 5 button simultaneously until 'dEF' shown on the display and the beep sound is heard. Now the factory reset is completed. Technical data Power supply: 120 Volt/60 Hz (USA version); 230 Volt/50 Hz (Europe version)/ ADAPTOR DC OUT 6V/0.
