BTS-101 中文 GB Version 1
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by SANGEAN ELECTRONICS INC. is under license. © 2013 CSR plc and its group companies. The aptX® mark and the aptX logo are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.
GB Control 1 2 3 4 5 6 7 8 Strap holder Speaker Battery charging indicator Power button Battery status indicator Volume up button Volume down button Bluetooth/Call answer-hangup button/Play and Pause button 9 10 11 12 13 14 15 Bluetooth status indicator Max volume indicator Microphone Power lock Aux in socket DC In NFC detection tag
Charging the unit This unit operates on a built-in Li-on battery that can be recharged either using the USB charging port or from a USB power adaptor (not included) with a rated output of DC 5V, 1000mA. The first time using your BluTab (BTS-101) speaker, connect it to DC (mains) power and fully charge the battery. When the battery is charging in progress, battery charging indicator is in solid red. After the battery is charged fully, the red battery charging indicator will turn off.
Pairing and connecting a device to the speaker Pairing and playing your Bluetooth device for the first time You need to pair your Bluetooth device with your BluTab (BTS-101) before you can auto-link to play/stream Bluetooth music through your Bluetooth speaker. Paring creates a `bond' so two devices can recognize each other. 1. Before turning on the speaker, make sure the power lock is switched off.
2) If your Bluetooth-enabled device is temporarily disconnected to your speaker. As long as the disconnection last within 10 minutes, your device can re-connect with your radio again automatically. If the disconnection last more than 10 minutes, then you need to manually reconnect your device again to the radio. Be aware that during the period of disconnection, no other Bluetooth device can pair or link with your radio.
3. Once connected, there will be a beep sound and the Bluetooth icon will remain in solid blue. You can simply select and play any music from your source device. GB Speaker memory and reconnecting a device BluTab can memorize up to 8 sets of paired device, when the memory exceed this amount, the least-recently-paired device will be erased from the radio.
3. Touch the NFC area of your playing device directly against the NFC tag marked on the rear panel of your BluTab. The unit then automatically connected with your NFC-enabled device. (If you pair with BluTab for the first time, some NFC-enabled device will be asked the permission to link with the speaker). Once paired with a device, ‘Connecting BluTab…’ is shown on your NFC-enabled device. The speaker beeps and the Bluetooth icon will illuminate in solid blue.
Playing music via auxiliary input socket A 3.5mm Auxiliary input socket is provided on the right hand side of the unit to permit an audio signal to be fed into the unit from any devices that features a headphone or audio output, such as an iPod, MP3 or CD player. 1. Connect a stereo or mono audio source (for example, iPod, MP3 or CD player) to the Auxiliary input socket. 2.
Power lock The power lock function is used to prevent unintentional power-on of the speaker in order to minimize unnecessary battery drainage. When power lock is activated (slide-up), there is no power supply and all function keys will be disabled including NFC tag detection. To disable the lock function, slide the power lock switch to its off position. The power lock function will then be disabled.
User Safety Precautions ● Check the room temperature range is 0°C–45°C (32°-113°Fahrenheit) before charging the battery. ● Do not attempt to disassemble the plastic covering or any parts of the device, as the materials inside may be toxic and may damage skin and clothes. ● Do not puncture, crush, modify, throw or cause any unnecessary shock to your battery, as the battery used in this device may present a risk of fire, explosion, or chemical burn if mistreated.
Specifications Amplifier Output power Frequency response 1.5W+1.5W 150Hz~20kHz Aux In Input sensitivity 250mVrms @100Hz Speaker Stereo speaker 28mm 4 ohm 3W Full range Bluetooth Bluetooth specification Profile Support Bluetooth Audio CODEC Transmitting Power Line of sight range Built-in Battery Battery 11 Bluetooth® Ver 4.0 A2DP, AVRCP(Only Play&Pause), HFP V1.6, HSP V1.2 aptX, SBC, MP3 Specification Power Class 2 10 meters/30 feet Rechargeable Lithium-ion battery 18650 3.
General DC-IN Power consumption Charging current Charging time Storage temperature Operating temperature Weight Micro USB jack 5V 1A 5V 0.5A (Charging in power OFF mode) 5V 1A (Charging in power ON mode) 0.5A 5 hours -20°C~ 60°C -10°C ~ 45°C 330g GB The company reserves the right to amend the specification without notice. If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste.