EN Cordless Job Site Speaker ESMX Altavoz Inalámbrico de Trabajo XRM08 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 3A81bW5Z20000 XRM08(12VMAX)-NA2-1703 SJN www.makita.com IMPORTANT: Read Before Using IMPORTANTE: Leer antes de usar.
Explanation of general view 14 1 2 3 12 4 11 10 9 8 7 6 17 5 15 16 13 25 18 20 19 1 1 21
24 1 23 22 2 3 23 16 17 15 4 5 2
ENGLISH (Original instructions) Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. Read instruction manual. IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: 1. Read this instruction manual and the charger instruction manual carefully before use. 2. Clean only with dry cloth. 3.
For United States: Cautions to the use The changes or modiications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF exposure statements IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Power by battery The following table indicates the operating time on a single charge. Battery Cartridge Voltage Battery capacity 10.8V -12Vmax 18V BL1016 AT SPEAKER OUTPUT = 100mW (unit: Hour) (Approximately) AUX IN Bluetooth AUX IN +USB(2.1A) Bluetooth +USB(2.1A) 12 11 1.0 9.5 9.0 1.5 15 14 1.0 BL1820B 13 12 2.0 BL1830/ BL1830B 18 17 3.0 31 28 2.5 BL1840B 25 24 4.0 5.0Ah BL1850B 32 31 5.5 6.0Ah BL1860B 39 37 6.5 1.5Ah BL1815N BL1021B 2.0Ah 3.0Ah BL1041B 4.
18V Battery USB power supply socket Indicator lamps Remaining capacity Lighted Off Blinking 75% to 100% 50% to 75% 25% to 50% This jack can be used to charge a mobile phone or any other device that uses less than 2.1A of DC current. Charging will only occur when the speaker is switched on. Note: Ensure the specification of your external device such as mobile phone, mp3 player or iPod is compatible with the speaker. Please read instruction manual of your external device before charging.
2. 3. 4. 5. search for the speaker, it will show its availability on both devices. However, if one device links with this unit irst, then the other Bluetooth device won't ind it on the list. If your Bluetooth device is temporarily disconnected to the speaker, then you need to manually reconnect your device again to the speaker.
MAINTENANCE CAUTION: • Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. Speciication Ampliier Output power Frequency response 10.8V:3.5W 18V:10W 50Hz~20kHz Aux In Input sensitivity 250mVrms @100Hz Speaker Main speaker Tweeter speaker 101.6mm 8 ohm 10W 36mm 8ohm 10W Bluetooth Bluetooth version Bluetooth proiles Transmission power 4.0 A2DP/ SCMS-T/ AVRCP Bluetooth speciication power Class 2 Transmission range Max.
