ASSEMBLY INSTRUCTIONS Double Tilt-Out Laundry Hamper ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
THIS UNIT WILL HOLD UP TO 25 POUNDS PER SHELF AND 15 POUNDS PER CLOTH HAMPER OR A TOTAL OF 55 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS, EACH CLOTH HAMPER WITH MORE THAN 15 POUNDS OR 55 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER SHELF, 15 POUNDS PER CLOTH HAMPER OR 55 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST 6 7 2 1 3 10 3 5 5 4 14 14 15 8 12 8 11 9 13 16 NO QTY DESCRIPTION 1 2PCS Hamper Front Door 2 2PCS Hamper Back Panel 3 4PCS Hamper Side Panel 4 2PCS Hamper Bottom Board 5 4PCS Hamper Support Bar 6 2PCS Hamper Left Cross Bar 7 2PCS Hamper Right Cross Bar 8 9 10 4PCS 2PCS 1PC 11 1PC Wooden Rod Cloth Hamper Top Board Left Side Panel 12 1PC Right Side Panel 13 1PC Bottom Board 14 2PCS Back Board 15 1PC Middle Support Panel 16 1PC Middle Suppor
PARTS LIST NO PARTS QTY DESCRIPTION A 14PCS Cam Bolt B 14PCS Cam Lock C 12PCS Wood Dowel D 4PCS Hamper Stopper E 4PCS Hinge F 2PCS Machine Screw (4x18mm) G 2PCS Knob H 2PCS Screw (4x10mm) I 8PCS Screw (4x15mm) J 40PCS Screw (4x20mm) K 2PCS Screw (4x30mm) L 16PCS Screw (3x12mm) M 20PCS Screw (2.
STEP 1 L L L L L E F E L 1 E G F ×2 G 1. 2. 3. Attach 2 hinges (E) to hamper front door (1) by inserting 4 screws (L) through holes on hinges (E), then tighten to hamper front door (1). Attach knob (G) to hamper front door (1) by inserting machine screws (F) through hole on hamper front door (1), then tighten to knob (G). Repeat above steps to assemble hinges (E) and knob (G) to another hamper front door (1). STEP 2 J J J 5 J J 5 J J J 1 1. 2.
STEP 4 3 3 J 1 2. J J 5 5 J 6 J 1. J 7 ×2 Attach 2 hamper side panels (3) to hamper front door (1) by inserting 6 screws (J) through holes on hamper side panels (3), then tighten to hamper support bars (5). Repeat above step to assemble another 2 hamper side panels (3) to hamper front door (1). STEP 5 J J 2 2 J 4 3 4. 3 7 1 1 3. J 3 3 6 1. 2. J J ×2 Slide hamper bottom board (4) into groove on hamper front door (1).
STEP 6 A A 13 C 13 1. 2. 3. 4. C B 15 B Screw 2 cam bolts (A) into cam bolt holes on bottom board (13). Insert 2 wood dowels into wood dowel holes on bottom board (13) Attach middle support panel (15) to bottom board (13) by inserting cam bolts (A) into cam lock holes and wood dowels (C) into wood dowel holes on middle support panel (15). Insert 2 cam locks (B) into cam lock holes on middle support panel (15), then rotate clockwise to secure cam bolts (A) in place. STEP 7 15 A 16 1. 2. 3.
STEP 8 12 11 1. 2. A A A A Screw 2 cam bolts (A) into cam bolt holes on left side panel (11). Screw 2 cam bolts (A) into cam bolt holes on right side panel (12). STEP 9 12 15 11 B C C C B 13 C B B 1. 2. 3. 4. Insert 4 wood dowels (C) into wood dowel holes on left side panel (11) and right side panel (12). Attach bottom board (13) to left side panel (11) by inserting cam bolts (A) into cam lock holes and wood dowels (C) into wood dowel holes on bottom board (13).
STEP 10 H H A N H A N A A N A A 10 1. 2. Screw 6 cam bolts (A) into cam bolt holes on top board (10). Attach 2 adjustable anchor brackets (N) to top board (10) by inserting 2 screws (H) through holes on adjustable anchor brackets (N), then tighten to top board (10). STEP 11 10 C B B C C B C B B B 12 15 11 13 1. 2. 3. Insert 6 wood dowels (C) into wood dowel holes on top board (10).
STEP 12 10 7 1 11 3 12 L L E 1. L L E E E L E 13 Attach assembled hampers to outside cabinet by inserting 8 screws (L) through 4 hinges (E), then tighten to bottom board (13). STEP 13 10 12 M M M 14 M M M 1. M M M M M M M 14 M M M M M M M Attach 2 back boards (14) to back of cabinet by inserting 20 screws (M) through holes on back boards(14), then tighten to back of cabinet.
STEP 14 O O O N 10 K OPTION #1 K WALL ANCHOR WITH SCREW 2. 12 OPTION #2 DRYWALL 11 DRYWALL K WOOD STUD 3 SCREW ONLY 3 7 6 1 Option #1: Securing to Drywall 1. K K 1 Position cabinet against wall in desired location. Using a pencil, make 2 small marks on wall through holes on brackets (N). Move cabinet away from wall and screw 2 plastic anchors (O) into wall on pencil marks.
STEP 16 8 8 9 9 ×2 ×2 10 11 3 1 10 1 9 9 11 3 1. 2. 3. 1 1 Insert 2 wooden rods (8) through tabs on cloth hamper (9). Place wooden rods (8) and cloth hamper (9) into cabinet as shown. Insert wooden rods (8) into grooves on hamper side panels (3) to avoid movement. Repeat above steps to assemble other wooden rods (8) and cloth hamper to unit. ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts.
Enjoy Your New Hamper! Thank you for purchasing this Home item. We hope you enjoy it and consider purchasing other items.