Quick Guide

ManualsBrandsSanbot ManualsElectronicsCharging Pile

Table Of Contents

MANUALS & QUICK GUIDES

FOR ROBOT

Thank you for purchasing our product. Please read this manual before use our product, so that you can make it easy to

operate our robot.

The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.

Please find the latest version in the company website(http://www.sanbot.com/service/download.html).

1. Points for Attention

 Please do not allow children under 7 years old to use this product alone.

 Children between 7 to 15 years old should be accompanied by parents or adults when use the robot.

 If you allow juveniles to use this product, please be sure to instruct them all do’s and don’ts as well as safe use of

electricity.

 Please tell your children not to put their fingers into the gap between the robot’s wings and its body as well as the gap

between the robot’s head and its body to avoid being jammed while the robot moves.

 Please softly move the robot head to do the look up and down.

 Please pay attention to those places where the product may fall or tumble to the ground.

 Do not immerse the product or the charging pile into liquid. Use a gentle cleanser to clean the robot if needed.

 Pleaseusethedesignatedchargingpiletochargetherobot.Anyotherpoweradapterisprohibited.

 Please do not throw or kick the product and the charging pile, which may result in mechanical failure, abnormal

function as well as degradation of performance.

 Please do not use or store the power adapter in the high temperature, humid or high voltage conditions. Once such

abnormal situations as leakage, strange smell, deformation, etc. appear, you should cut the power immediately.

 When you move the robot on power-off, please push its front body forward, i.e. push it go backwards, or push its back

slowly at constant speed.

Summary of content (11 pages)

PAGE 1
MANUALS & QUICK GUIDES COPYRIGHT ©2017 Shenzhen Sanbao Innovation Robot Co., Ltd. FOR ROBOT Thank you for purchasing our product. Please read this manual before use our product, so that you can make it easy to operate our robot. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website(http://www.sanbot.com/service/download.html). 1.
PAGE 2
. Robot Appearance Front Back
PAGE 3
Lateral Top
PAGE 4
Bottom Charging Pile (Front) Charging Pile (Back)
PAGE 5
3. QUICK GUIDE 1) Press the power switch at the bottom of the robot to turn on the power. 2) When starting the robot for the first time or after restoring the local factory settings, touch the screen to start the wizard, then go through all proposed steps, i.e.
PAGE 6
Go forward Go forward, move forward, move on Turn left Turn left Turn right Turn right Turn about Turn about Stop moving Stop Get away Get out Walk to you Come here Start to wander Start to wander, Walk freely Stop wandering Stop wandering, stop walking freely Enable gesture Enable gesture Disable gesture Disable gesture Turn on projector Turn on the projector Turn off projector Turn off the projector Turn on LED light Light on Turn off LED light Light off Play music Play musi
PAGE 7
4. To Operaate Mobille APP 1) Q-Link Insttallation Download ““Q-Link” APP P from the APP A Store andd install on your phone. We W recommend that you use a phone runn ning Android 4.0 + or IOS S 9.0+. 2) Register & Log-in Open the “Q Q-Link” APP P, click “Login n”, click “Reegister” to inp put user inforrmation and tthen you can n get a verificcation code by SM MS on your mobile, m input the verificattion code and d click “regisster” to finishh.
PAGE 8
On the “life” interface, you can control robot remotely, manage your address list, and download some apps for your robot, etc. 8) “Devices” On the “Devices” interface, you can add robots, add intelligent home devices, modify the robot remarks and view its residual battery capacity, manage friends of the robot (only for admin) , control the robot to take pictures, browse videos in the camera of the robot, enable the protection strategy, control the smart home devices and so on.
PAGE 9
(3) Click the “Settings” on the touch screen of the robot → Battery → Enable auto-recharge → set a minimum residual battery capacity for auto-recharge. (4) When the robot is being used, its residual capacity is lesser than the setting value or its charging mode is enabled by clicking “Charge”, the robot will look for charging pile to charge it automatically. Mode Two: Manually charging Plug the power wire into the power sock.
PAGE 10
*************************************************************************************************** Our company will regularly improve and update the manual with the improvement or change of the product. Updated contents will be added into the new edition of this manual without further notice. If you have any questions or need anything, please contact our customer service or the technical support department of our company. We will provide you effective and efficient, professional and dedicated service.
PAGE 11
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules.