User Manual

Lens Station for SONY E
Instruction Manual
Lens Station: A device to update the firmware of the Sony E-
mount autofocus lens
Lens Manager: Software to operate the Lens station.
The Lens station is for SAMYANG Sony E-mount autofocus
lenses only.
You can update the firmware and adjust the focus and aperture
with the SAMYANG Lens Manager software. Connect the lens
station with your computer with enclosed USB cable.
Please familiarize yourself with the functions of this product, the
operating method and cautions for handling the product correctly
through this instruction manual prior to use.
For detailed information regarding compatibility, visit a distributor
or the certified service center in your area, or make inquiries via
the message board of our homepage.
l Components l
󳢯Lens Station 󳢯Cautions for Use
󳢯Body cap 󳢯Product warranty
󳢯USB cable
Please read this instruction manual prior to use.
l Lens Installation and Detachment l
󳢯
Attaching the lens
Remove the body cap of the Lens Station.
Align the mount index (red) of the Lens Station to the mount
connection point (white) of the lens, then rotate the lens in the
CLOSE direction until a clicking sound occurs.
󳢯
Detaching the lens
With the lens-detaching button of the lens station pressed, detach
the lens by rotating it in the OPEN direction to the end.
l EMC Product l
Class B equipment: Korean Class B ITE
This equipment has been registered with
electromagnetic compatibility for household purposes
and can be used in residential areas, as well as all other
areas.
Certification Number : MSIP-REM-s8c-lens-station
ㅣMEMOㅣ

Summary of content (2 pages)