User Manual

Location of Controls

YP-T6 Quick Guide

Recording Button

Play/Pause Button

Hold Switch

Loop Repeating Button

USB Cable

Connection Port

ENC Jack

Neck strap Hook

MENU, Navigation button/

Move to Track/Speed Search/

Volume Button

Display

Battery Cover

Earphone Jack

Microphone

Turning Power On and Off

Playing Music

Pausing Music

● Power On : Press the button to turn on the power.

● Power Off : Press and hold the button to turn off the power.

Press the button.

● Playback starts.

Press the button to pause playback.

● If no buttons are pressed within 10 seconds(changes depending on settings),

the yepp automatically powers off.

● While in Pause mode, briefly press again to resume playback.

Disconnecting the USB cable

After completing the file transfer, you must disconnect the cable in the following way:

AH68-00000A (Rev 0.0)

1 Double-click on the green arrow in the

taskbar on the bottom right of the window.

2 When the [Stop a Hardware device] message appears,

press the [OK] button and disconnect the USB cable.

PAGE 1
YP-T6 Quick Guide Disconnecting the USB cable Location of Controls After completing the file transfer, you must disconnect the cable in the following way: 1 Neck strap Hook Display MENU, Navigation button/ Move to Track/Speed Search/ Volume Button Double-click on the green arrow in the taskbar on the bottom right of the window.
PAGE 2
Connecting the USB cable ➤ Before connecting the player to PC, make sure to install USB driver. Insert the Installation CD into the CD-ROM drive and then click [Install USB Driver]. Complete the installation by the instructions in the order as they appear in the windows. 1 2 Connect the USB cable to the USB port on the computer. Connect the other end of the USB cable to the USB cable connection port on the bottom of the player.