NETWORK VIDEO RECORDER Quick Guide XRN-6410DB4/XRN-6410B4/XRN-3210B4
English Package Contents Features The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk. It also provides remote monitoring environment for video and audio over the network using a remote computer. • Provides new UI 2.
Installing the HDD 1 Use the front cover lock key to unlock the cover. Grab the front cover with both hands and pull it to the left to remove it. Installing the Rack 2 Press the orange button on the hard disk bracket to the left and pull forward to separate the main body and the hard disk bracket.
Recommended rack dimensions Precautions when Using Sliding Shelves Rack back Avoid leaning on the installed product or place an object on it while its shelf is pulled out. When sliding in/out the shelf, be careful not to drop the product. Use a shelf that supports the load of at least 30 kg while it is pulled out, and ensure that there is no deformation on the rail part while in use. B D E Back mounting flange When removing a shelf, fix the rack to the ground so that it does not get toppled.
Install Wizard Setup How to Install Rack As shown below, proceed through each step of the . Install Wizard can only be accessed at factory reset. If you do not want to proceed, click . 1 Mount the fixed or sliding shelf onto the 19-inch rack. ` See the manual provided by the manufacturer for installing the fixed shelf. ` You can set the install wizard on the recorder and web viewer.
3 Recorder ID/PW Setup 5 Set the date, time, time zone, and DST and then click . Sets the administrator's password. ※ Click < 4 Date/Time Setup 6 > to view the basic guide for setting a password. Refer to the password setup rules. Camera ID/PW Setup Camera Register Registers the searched network cameras. 6-1 Select a camera to register from the searched camera list and click . 4-1. Set a camera password in factory reset. The initial password for the camera must be entered.
Explore Screen Configuration Record Setup The recorder screen consists of the following. M You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event. You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel, and set the transfer limit for recordings. `` The screen may be configured differently depending on the menu selected by the user.
Set up and Run the Layout 2-1 Search The layout set on the live screen can also be used for time search and can be searched and played according to the channel order and channel combination set by the user. M 1 `` For more information on how to set each step, refer to the ‘User Manual’. Live channel layout setup e a b d a Select the layout of your choice from the channel groups you created in Live. c b Please select a date to search. a Add a layout.
3 Using Product Information Export recorded video You can check the product information/manual/firmware information/FAQ/HDD compatibility list on the homepage or mobile web of your smartphone. http://hanwha-security.com a Click < > at the bottom of the screen. b Select a layout. c Select a channel. d Set the time, device, and format for export. XRN-6410DB4 e Click the button to see if you can export. f Click the button to proceed with the export.
Using P2P Service 4 From now on, when you run the WiseNet mobile application saved to your smartphone, you can easily monitor with your smartphone as you are automatically connected to the recorder. This function is available only for products that support P2P. To find products that support P2P, see ‘Products supporting each feature (Page 4)’ of the Product Specification Manual. When using a P2P service, you can easily access and use with Wisenet mobile.
Connecting to a Network Using a Router Checking the recorder connection from the PC Enter the IP set in the recorder menu in the local PC address bar to go to the web viewer screen of the recorder. If you want to add 1-3 PCs and recorders in an environment using xDSL/Cable modem, you can use the router with only one Internet line. This guide is an installation guide for network beginners. Follow the instructions to set up your router, local PC, and recorder.
Accessing using DDNS address in the dynamic IP environment Connect using DDNS address In the dynamic IP environment such as xDSL/Cable modem, the router's WAN IP can be changed, so we provide DDNS (Dynamic Domain Name Server) service so that you can always access the recorder with only the DDNS address even in the dynamic IP environment. 1 Select DDNS site on the recorder setup menu and enter the product ID.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
