NETWORK VIDEO RECORDER Product Specification Manual XRN-6410DB4/XRN-6410B4/XRN-3210B4
Network Video Recorder Product Specification Manual Copyright ©2020 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
overview Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.
overview ATTENTION • IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS. • Ne pas ingérer la pile, risque de brûlure chimique. • Ce produit contient une pile de type bouton/pièce de monnaie. Si la pile de type bouton/pièce de monnaie est avalée, elle peut causer de graves brûlures internes en seulement 2 heures et peut entraîner la mort.
overview Contents overview 3 3 Important Safety Instructions 5 Contents 3 6 6 7 8 installation 9 connecting with other device 13 Before Start Features Package Contents Part Names and Functions (Front) Part Names and Functions (Rear) 9 Checking the Installation Environment 11 Installing the HDD 9 Installing the Rack 13 Connecting to an External Device 14 Connecting the Alarm Input/Output 13 14 Connecting the USB Connecting the Network English _5
overview featureS The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk. It also provides remote monitoring environment for video and audio over the network using a remote computer. • Provides new UI 2.0 pacKage contentS Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit.
overview part nameS and functIonS (front) Name You can check the operation status of each hard disk by opening the front cover of the recorder.
overview part nameS and functIonS (rear) Name Xrn-6410dB4 Power b c Xrn-6410B4/Xrn-3210B4 Functions Terminal to connect power to. (XRN-6410DB4) • With duplex power supply, even if you connect only one power supply, it can operate properly. • SMPS buzzer will sound when a problem occurs during operation. Power/Power Switch A terminal to connect the power and a switch to turn the power on and off. (XRN-6410B4/XRN-3210B4) b AUDIO OUT Audio signal output port.
installation Installing the Rack Please take note of the followings before using this product. • • • • • • • • Do not use the product outdoor. Do not spill water or liquid in the connection part of the product. Do not impose the system to excessive shock or force. Do not pull out the power plug forcefully. Do not disassemble the product on your own. Do not exceed the rated input/output range. Use a certified power cord only. For the product with an input ground, use a grounded power plug.
installation Recommended rack dimensions Precautions when using sliding shelves Rack back Avoid leaning on the installed product or place an object on it while its shelf is pulled out. When sliding in/out the shelf, be careful not to drop the product. Use a shelf that supports the load of at least 30 kg while it is pulled out, and ensure that there is no deformation n the rail part while in use.
installation How to install rack 1 Mount the fixed or sliding shelf onto the 19-inch rack. `` See the manual provided by the manufacturer for installing the fixed shelf. Installing the HDD Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the product. `` Number of HDDs supported : Max.
installation Installing the hdd M 3. Mount a HDD in the HDD bracket and screw it in using the screws provided. ` If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the set before use. To learn how to format, see "Device/Format" in the User Manual. 1. Use the front cover lock key to unlock the cover. Grab the front cover with both hands and pull it to the left to remove it. 4.
connecting with other device connectIng to an eXternal devIce ` The following figures are based on Model XRN-6410DB4. connectIng the uSB 1. On the front of the product, there is a USB port. 2. You can connect a USB HDD, USB memory or mouse to the USB port. 3. If your USB HDD is connected to the system, it can be detected and set up by following the steps in “Setup > Setting the device > Storage device” of the User Manual. 4.
connecting with other device connectIng the alarm Input/output connectIng the netWorK The Alarm In/Out port at the back is composed of the following. M ` For more information about network connection, see "Network Configuration" in the User Manual. network connection via ethernet (10/100/1000Baset) Sensors Alarm Switch Switch • ALARM IN 1 ~ 8 : Alarm Input Port • ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes sensing.
connecting with other device connecting the iScSI directly connecting to the recorder iSCSI a switch can be used for connection Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
