NETWORK VIDEO RECORDER Quick Guide PRN-3210B2/PRN-1610B2 XRN-6410RB2/XRN-6410B2/XRN-3210RB2/XRN-3210B2
English Package Contents Features The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk. It also provides remote monitoring environment for video and audio over the network using a remote computer.
Installing the HDD XRN-6410B2/XRN-3210B2 Recorder Mouse ■ If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the set before use. To learn how to format, see "Device/Format" in the User Manual. ■ If you wish to replace or add an HDD, contact your dealer or our customer service first.
XRN-6410B2/XRN-3210B2 5 Connect the SATA/power cable of the hard disk to the connector of the main board. 1 Remove the screws from the top and back sides of the recorder, and push the cover back to release it. 2 Remove the screws from the left/right sides and release the bracket. 3 Mount 8 hard disks into the bracket, and fix it using screws. 4 Fix the hard-disk-mounted bracket to the recorder using screws. ■ 4 Refer to the figure below for the hard disk location number and connector number.
Connecting the Network ■ Network connection via router For more information about network connection, see "Network Configuration" in the User Manual.
Installation Wizard Setup 3 As shown below, proceed through each step of the . Install Wizard can only be accessed at factory reset. If you do not want to proceed, click . 1 ■ You can set the installation wizard on the recorder and web viewer. Refer to the User Manual for instructions on how to set up the installation wizard on the web viewer.
5 7 Date & Time Setup You can view the camera videos registered to each channel in split mode along with thumbnail information. To change the camera video position, select a video and drag and drop it to the desired location. Set the date, time, time zone, and DST and then click . ※ T he time zone setup might differ depending on the region that the product is released. 6 Channel Setting 8 Click to complete the installation wizard.
Explore Screen Configuration Record Setup The recorder screen consists of the following. You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event. You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel, and set the transfer limit for recordings. ■ The screen may be configured differently depending on the menu selected by the user. Setup > Record > Record setup ● ● ● ● No.
Set up and Run the Layout 2-1 Search The layout set on the live screen can also be used for time search and can be searched and played according to the channel order and channel combination set by the user. ■ 1 For more information on how to set each step, refer to the ‘User Manual’. Live channel layout setup Select the layout of your choice from the channel groups you created in Live. Please select a date to search. Add a layout. Select the channel of your choice from the selected channel group.
3 Using Product Information Export recorded video You can check the product information/manual/firmware information/FAQ/HDD compatibility list on the homepage or mobile web of your smartphone. http://hanwha-security.com Click < > at the bottom of the screen. Select a layout. Select a channel. Set the time, device, and format for export. XRN-6410B2 Click the button to see if you can export. Click the button to proceed with the export. XRN-6410B2 10 http://hanwha-security.
Using P2P Service 4 From now on, when you run the WiseNet mobile application saved to your smartphone, you can easily monitor with your smartphone as you are automatically connected to the recorder. This function is available only for products that support P2P. To find products that support P2P, see ‘Products supporting each feature (Page 4)’ of the Product Specification Manual. When using a P2P service, you can easily access and use with Wisenet mobile.
Connecting to a Network Using a Router Checking the recorder connection from the PC If you want to add 1-3 PCs and recorders in an environment using xDSL/Cable modem, you can use the router with only one Internet line. Enter the IP set in the recorder menu in the local PC address bar to go to the web viewer screen of the recorder. This guide is an installation guide for network beginners. Follow the instructions to set up your router, local PC, and recorder.
Accessing using DDNS address in the dynamic IP environment Connect using DDNS address In the dynamic IP environment such as xDSL/Cable modem, the router's WAN IP can be changed, so we provide DDNS (Dynamic Domain Name Server) service so that you can always access the recorder with only the DDNS address even in the dynamic IP environment. 1 Select DDNS site on the recorder setup menu and enter the product ID. 2 Connect to ddns.hanwha-security.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
