User Manual
Table Of Contents
- overview
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
installation & connection
12_ installation & connection
[Installing the network cable]
4. Pull off the extruded parts of the cable bushing to be used.
5. Use the cap installer to route the network cable through the cable bushing.
Cap Installer
6. Mount the cable bushing to the camera body.
[Installing the Audio/Alarm/Power cables]
7. Mount the cable bushing of the provided audio/alarm/power cables to the camera body.
8. Join the mount plate with the camera body.
2x
TR20