Washing Machine User manual WD85T4***** WD85T4046CE_04215R-00_EN.
Contents Contents Safety information 4 What you need to know about the safety instructions Important safety symbols Important safety precautions Critical installation warnings Installation cautions Critical usage warnings Usage cautions Critical cleaning warnings 4 4 5 10 11 12 13 17 Installation 18 What’s included Installation requirements Step-by-step installation 18 20 22 Before you start 32 Initial settings Laundry guidelines Detergent drawer guidelines 32 32 35 Operations 38 Control pan
53 Checkpoints Information codes 53 57 Specifications 60 Fabric care chart Protecting the environment Spare parts guarantee Specification sheet 60 61 61 61 Contents Troubleshooting English 3 WD85T4046CE_04215R-00_EN.
Safety information Safety information Congratulations on your new Samsung washing machine. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washing machine’s many benefits and features.
WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Safety information Important safety precautions 1. This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 2.
Safety information Safety information 7. For use in Europe: Children of less than 3 years should be kept away unless continuously supervised. 8. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. 9. The tumble dryer is not to be used if industrial chemicals have been used for cleaning. 10.
Safety information 17. The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged. 18. Remove all objects from pockets such as lighters and matches. 19. WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. 20.
Safety information Safety information To minimize the risk of fire in a tumble dryer, the following should be observed CAUTION Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer. Oil-affected items can ignit spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat.
Fabric softeners, or similar products, should be used as specified by the fabric softene instructions. The final part of a tumble dryer cycle occurs without heat(cool down cycle) to ensure tha the items are left at a temperature that ensures that the items will not be damaged. Safety information Items such as foam rubber(latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in th tumble dryer.
Safety information Safety information Critical installation warnings WARNING The installation of this appliance must be performed by a qualified technician or service company. • Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury. The appliance is heavy, therefore take care when lifting it. Plug the power cord into an AC 220 - 240 V / 50 Hz wall socket or higher and use the socket for this appliance only. Never use an extension cord.
Safety information Do not install this appliance in a location where gas may leak. • This may result in electric shock or fire. Do not use an electric transformer. • This may result in electric shock or fire. Do not use a damaged power plug, damaged power cord, or loose wall socket. • This may result in electric shock or fire. Do not pull or excessively bend the power cord. Do not twist or tie the power cord.
Safety information Safety information Critical usage warnings WARNING If the appliance is flooded, turn off the water & power supplies immediately and contact your nearest service centre. • Do not touch the power plug with wet hands. • Failure to do so may result in electric shock. If the appliance generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest service centre. • Failure to do so may result in electric shock or fire.
This may result in electric shock, burns or injury. Do not insert your hand or a metal object under the washing machine while it is operating. • This may result in injury. Do not unplug the appliance by pulling the power cord. Always grip the plug firmly and pull it straight out of the outlet. • Damage to the power cord may cause a short-circuit, fire and/or electric shock. Safety information • Do not attempt to repair, disassemble, or modify the appliance yourself.
Safety information Safety information Open the water tap slowly after a long period of non-use. • The air pressure in the water supply hose or the water pipe may damage a product part or result in a water leak. If a draining error occurs during an operation, check if there is a draining problem. • If the washing machine is used when it is flooded because of a draining problem, it may result in electric shock or fire.
(*): Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle, motor cycle and car covers, etc. • Do not wash thick or hard mats even if the washing machine mark is on the care label. This may result in injury or damage to the washing machine, walls, floor, or clothing due to abnormal vibrations. • Do not wash throw rugs or doormats with rubber backing.
Safety information Safety information Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent. • This may result in spontaneous combustion or ignition due to the heat from the oxidation of the oil. Do not use water from water cooling/heating devices. • This may result in problems with the washing machine. Do not use natural hand-washing soap for the washing machine.
Safety information Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it. Do not use the a strong acidic cleaning agent. Do not use benzene, thinner or alcohol to clean the appliance. • This may result in discolouration, deformation, damage, electric shock or fire. Before cleaning or performing maintenance, unplug the appliance from the wall socket. • Failure to do so may result in electric shock or fire. English 17 WD85T4046CE_04215R-00_EN.
Installation Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry. What’s included Make sure all the parts are included in the product package. If you have a problem with the washing machine or the parts, contact a local Samsung customer centre or the retailer.
Bolt caps Hose guide Cold water hose Hot water hose Liquid detergent container Installation Spanner Cap fixer Accessories (not supplied) • Stacking kit: SKK-DF - Staking kit is required to stack a dryer on a washing machine. NOTE • • • • • Spanner: For removing the shipping bolts and levelling the washing machine. Bolt caps : For covering the holes after removing the shipping bolts. The provided number of bolt caps (3 to 6) depends on the model.
Installation Installation requirements Electrical supply and grounding Water supply AC 220-240 V / 50 Hz fuse or circuit breaker is required • Use an individual branch circuit specific to the washing machine To ensure proper grounding, the washing machine comes with a power cord featuring a three-prong grounding plug for use in a properly installed and grounded outlet. Check with a qualified electrician or serviceperson if you are not sure about the grounding. Do not modify the provided plug.
Alcove or closet installation For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are not a good resistance to vibrations and may cause the washing machine to move slightly during the spin cycle. Minimum clearance for stable operation: CAUTION Do NOT install the washing machine on a platform or a poorly supported structure.
Installation Step-by-step installation Installation STEP 1 Select a location Location requirements: • Solid, level surface without carpeting or flooring that may obstruct ventilation • Away from direct sunlight • Adequate room for ventilation and wiring • The ambient temperature is always higher than the freezing point (0 ˚C) • Away from a heat source STEP 2 Remove the shipping bolts Unpack the product package and remove all shipping bolts. NOTE Number of shipping bolts may differ depending on the model.
1. Locate the shipping bolts (marked with circle in the figure) on the rear side of the washing machine. CAUTION NOTE A Installation Do not remove the screw (A) that fixes the hose clip. 2. Using the supplied spanner, loosen all the shipping bolts by turning them counterclockwise. You must keep the shipping bolts for future use. English 23 WD85T4046CE_04215R-00_EN.
Installation 3. Insert the bolt caps (B) to the holes (marked with circle in the figure). Installation B STEP 3 Adjust the levelling feet 1. Gently slide the washing machine into position. Excessive force may damage the levelling feet. 2. Level the washing machine by manually adjusting the levelling feet. 24 English WD85T4046CE_04215R-00_EN.
3. When levelling is complete, tighten the nuts using the spanner. Installation CAUTION When installing the product make sure the levelling feet is not pressing the power cord. CAUTION Make sure all the levelling feet are seating on the floor surface to avoid the washing machine from moving or generating noise due to vibration Then, check if the washing machine is not rocking. If the washing machine is not rocking, tighten the nuts. English 25 WD85T4046CE_04215R-00_EN.
Installation STEP 4 Connect the water hose The provided water hose may differ depending on the model. Please follow the instruction according to the provided water hose. Connecting to a threaded water tap Installation 1. Connect the water hose to the water tap, and then turn the connector clockwise as shown. 2. Connect the other end of the water hose to the inlet valve on the back of the washing machine. Turn the hose clockwise to tighten. 3.
CAUTION Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, high-pressure hose. Connecting to a non-threaded water tap A Installation 1. Remove the adaptor (A) from the water hose (B). B 2. Use a Phillips screwdriver to loosen four screws on the adaptor. 3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*). C English 27 WD85T4046CE_04215R-00_EN.
Installation Installation C D 4. Insert the adaptor onto the water tap, and then tighten the screws while lifting the adaptor. 5. Turn part (C) in the arrow direction to tighten it. 6. While pulling down part (D) on the water hose, connect the water hose to the adaptor. Then, release part (D). The hose fits into the adaptor with a clicking sound. 7. To complete connecting the water hose, see 2 and 3 on the “Connecting to a threaded water tap” section.
For models with an additional hot water inlet: 1. Connect the red end of the hot water hose to the hot water inlet on the back of the machine. 2. Connect the other end of the hot water hose to the hot water tap. Installation Aqua stop hose (applicable models only) The aqua stop hose alerts users of a risk of water leaks. It senses the water flow and turns red on the centre indicator (A) in case of a leak. A NOTE The end of the aqua stop hose must be fitted to the water tap and not the machine.
Installation STEP 5 Position the drain hose The drain hose can be positioned in three ways: Installation Over the edge of a wash basin A The drain hose must be placed at a height of between 60 cm and 90 cm (*) from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A). Secure the guide to the wall using a hook to ensure stable drainage. In a drain pipe The drain pipe should be between 60 cm and 90 cm high (*). It is advisable to use a 65 cm high vertical pipe.
In a sink drain pipe branch The drain pipe branch mush be above the sink siphone so that the end of the hose is at least 60 cm above the ground. (*) : 60 cm CAUTION Installation Remove the lid on the sink drain pipe branch before connecting the drain pipe to it. STEP 6 Turn on the washing machine Plug the power cord into a wall socket that is correctly rated, grounded, and protected by a fuse or circuit breaker. Then, press Power to turn on the washing machine.
Before you start Initial settings Run Calibration (recommended) Before you start Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running Calibration. 1. Power off, and then power on the washing machine. 2. Hold down Temp. and Delay End simultaneously for 3 seconds to enter Calibration mode. The “CB” message appears. 3. Press Start/Pause to run the Calibration cycle. 4. The drum will rotate clockwise and counter-clockwise for about 3 minutes. 5.
Turn clothing with buttons and embroideries inside out • • If pants or jacket zippers are open while washing, the drum may be damaged. Zippers should be closed and fixed with a string. Clothing with long strings may become entangled with other clothes. Make sure to tie the strings before starting the wash. STEP 3 Use a laundry net • • STEP 4 Prewash (if necessary) Select the Prewash option for the selected cycle if the laundry is heavily soiled.
Before you start NOTE • • • Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the degree of soiling, and the hardness of the water in your local area. If you are not sure about the water hardness, contact a local water authority. Do not use detergent that tends to be hardened or solidified. This detergent may remain after the rinse cycle, blocking the drain outlet.
Detergent drawer guidelines The washing machine provides a three-compartment dispenser: the left compartment for the main wash, the centre compartment for fabric softeners, and the right compartment for the preliminary wash. Prewash compartment: Apply prewash detergent. 02 Main-wash compartment: Apply main-wash detergent, water softener, soaking detergent, bleach, and/or stain removers. 01 A Softener compartment: Apply additives such as fabric softener. Do not exceed the max line (A).
Before you start 3. Apply fabric softener to the softener compartment. Do not exceed the max line (A). Before you start A 4. If you want to prewash, apply prewash detergent to the prewash compartment as instructed or recommended by the manufacturer. 5. Close the detergent drawer. CAUTION • • • Do not apply powder detergent to the liquid container. Concentrated fabric softener must be diluted with water before applied. Do not apply main-wash detergent to the softener compartment.
To use liquid detergent (applicable models only) First insert the provided liquid container in the main-wash compartment. Then, apply liquid detergent to the container below the marked max line (A). CAUTION A • • Before you start When using liquid detergent Do not exceed the max line that is marked inside the container. Turn up the liquid container if using powder detergent. When using powder detergent English 37 WD85T4046CE_04215R-00_EN.
Operations Control panel 09 02 08 01 Operations 03 04 05 06 07 01 Cycle Selector Turn the dial to select a cycle. 02 Display The display shows current cycle information and estimated time remaining, or an information code when a problem occurs. 03 Temp. Press to change the water temperature for the current cycle. 04 Spin Press to change the spinning speed for the selected cycle. • Rinse Hold (No indicator): The final rinse cycle is suspended so that the laundry remains in the water.
08 Start/Pause Press to start or stop operation. 09 Power Press to turn on/off the washing machine. For more information on the options, see the Special features section. *(3 sec) : Press and hold for 3 seconds. Simple steps to start 2 1 4 5 Press Power to turn on the washing machine. Turn the Cycle Selector to select a cycle. Change the cycle settings ( Temp., Spin and Dry Option) as necessary. The machine provides one easy to access buttons for Delay End for your convenience.
Operations Drying Only 1 2 4 3 Operations You can dry your clothes directly or dry the washed clothes according to the following procedures. 1. 2. 3. 4. Press Power button to turn on the washing machine. Turn the Cycle Selector to select COTTON DRY cycle. Press Dry Option button to select the appropriate drying mode. Press Start/Pause button to start dry. To change the cycle during operation 1. Press Start/Pause to stop operation. 2. Select a different cycle. 3.
Cycle overview Standard cycles Cycle Description Max Optimal performance with lower energy for cotton fabrics, bed linens, table linens, underwear, towels, or shirts. For energy saving, the actual washing temperature may be lower than specified. E Cotton, Temp 40, Rinse 2, Spin 1400, Intensive is recommended for a normally soiled cotton load. Energy and water labelling test programme in accordance with AS/NZS 2040.
Operations Cycle Description For lightly soiled items in less than 2.0 kg that you want to wash quickly. Use less than 20 g of detergent. Using more than 20 g of detergent may leave detergent residue. For liquid detergent, use a max of 20 ml of liquid detergent. Use the High or Extra High spin speed option if load is sensed not so dry at the end of this cycle. 2.0 • For everyday items such as underwear and shirts. 4.
NOTE • • • Loading the household washing machine or the household washer-dryer up to the capacity indicated by the manufacturer for the respective cycles will contribute to energy and water savings. The noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.
Operations Delay End You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1. Select a cycle. Then change the cycle settings if necessary. 2. Press Delay End repeatedly until a desired end time is set. 3. Press Start/Pause. The corresponding indicator turns on with the clock running. 4.
Settings Child Lock Sound On/Off To prevent children or infants from accidentally starting or setting the washing machine, Child Lock locks all buttons except for the Power button. • To set the Child Lock function, hold down Temp. and Spin simultaneously for 3 seconds. To activate, press Start/ Pause. • To release the Child Lock function, hold down Temp. and Spin simultaneously for 3 seconds. You can turn on or off the sound from the washing machine.
Maintenance Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle. Drum clean Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water between 60 °C and 70 °C. 1. Press Power to turn on the washing machine. 2. Turn the Cycle Selector to select DRUM CLEAN. 3. Press Start/Pause. NOTE • • • The water temperature for DRUM CLEAN is set to 70 °C, which cannot be changed.
Smart check To enable this function, you must first download the Samsung Smart Washer app at the Play Store or the Apple Store, and install it on a mobile device featuring a camera function. The Smart Check function has been optimized for Galaxy & iPhone series (applicable models only). 1. When the washing machine detects an issue to check, an information code appears on the display. To enter Smart Check mode, press and hold Dry Option and Delay End simultaneously for 3 seconds. 2.
Maintenance Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. 1. Power off and unplug the washing machine from the electrical outlet. 2. Gently press the top area of the filter cover (A) to open. A 3. Put an empty, spacious container around the cover, and stretch the emergency drain tube to the container while holding the tube cap (B). Maintenance B C 4. Open the tube cap and let water in the Emergency drain tube (C) flow into the container. 5.
Cleaning Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the power cord. 2. Close the water tap. 3. Loosen and disconnect the water hose from the back of the washing machine. Cover the hose with a cloth to prevent water from gushing out. Maintenance 4.
Maintenance Debris filter Clean the debris filter bi-monthly to prevent clogging. A clogged debris filter may reduce the bubble effect. 1. Turn off the washing machine, and unplug the power cord. 2. Drain the remaining water inside the drum. See the “Emergency drain” section. 3. Gently press the top area of the filter cover to open. 4. Turn the debris filter knob to the left, and drain off the remaining water. 5. Clean the debris filter using soft brushes.
Detergent Drawer A 1. While holding down the release lever (A) on the inner of the drawer, slide open the drawer. 2. Clean the drawer components in flowing water using a soft brush. Maintenance 3. Clean the drawer recess using a bottle brush to remove detergent residues and limescale on the drawer recess. 4. Reinsert the release lever and the liquid detergent container to the drawer. 5. Slide the drawer inward to close it.
Maintenance Recovery from freezing The washing machine may freeze when it drops below 0 °C. 1. 2. 3. 4. 5. Turn off the washing machine, and unplug the power cord. Pour warm water over the water tap to loosen the water hose. Disconnect the water hose, and soak it in warm water. Pour warm water into the drum and leave it for about 10 minutes. Reconnect the water hose to the water tap. NOTE If the washing machine still doesn’t operate normally, repeat the above steps until it operates normally.
Troubleshooting If there is any problem, check the information message on the LED screen and follow the onscreen instructions. If the problem persists, please contact the service center. Checkpoints If you encounter a problem with the washing machine, first check the table below and try the suggestions. Problem Action • • • • • • Does not start. • • • • • • After a cycle, detergent remains in the detergent drawer. • • • • Fully open the water tap. Make sure the door is properly closed.
Troubleshooting Problem Action • • • Excessive vibrations or makes noise. • • • • • • Troubleshooting • • Does not drain and/ or spin. • • • • • Make sure the washing machine is installed on a level, solid floor that is not slippery. If the floor is not level, use the levelling feet to adjust the height of the washing machine. Make sure the shipping bolts are removed. Make sure the washing machine is not in contact with any other object. Make sure the laundry load is balanced.
Problem Action • • • The door does not open. • • • • Excessive suds. • • • Cannot apply additional detergent. Press or tap Start/Pause to stop the washing machine. It may take a few moments for the door lock mechanism to disengage. The door will not open until 3 minutes after the washing machine has stopped or the power has been off. Make sure all the water in the drum is drained. The door may not open if water remains in the drum. Drain the drum and open the door manually.
Troubleshooting Problem Action • • • • • Fills with the wrong water temperature. • • Load is wet at the end of a cycle. • • • Troubleshooting • • • • Leaks water. Has odours. • • • • • • • Fully open both taps. Make sure the temperature selection is correct. Make sure the hoses are connected to the correct taps. Flush water lines. Make sure the water heater is set to supply a minimum of 49 °C hot water at the tap. Also, check the water heater capacity and recovery rate.
Problem No bubbles are seen (Bubble models only). Action • • You may not be able to see bubbles if there is too much items in the drum. Severely contaminated laundry may not generate bubbles. If a problem persists, contact a service center. Information codes If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions. Code Action Water is not supplied. • • • • 4C • • Make sure the water taps are open.
Troubleshooting Code Action Operating the washer with the door open. dC • • Make sure the door is properly closed. Make sure laundry is not caught in the door. Water has overflowed. OC • • Restart after spinning. If the information code remains on the display, contact a local Samsung service centre. Check the drain hose. LC, LC1 • • • Make sure the end of the drain hose is not placed on the floor. Make sure the drain hose is not clogged.
Code Action Check communications between main and sub PBAs. AC • • Turn the machine off, and restart the cycle. If the information code remains, contact a customer service centre. The drying fan motor is not working properly. FC • • Turn the machine off, and restart the cycle. If the information code remains, contact a local Samsung service centre. The machine does not turn off automatically after the last spinning process, and the “0” message remains.
Specifications Fabric care chart The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximize garment life and reduce laundry problems.
Protecting the environment • • • • This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance. Do not exceed the detergent quantities recommended in the detergent manufacturer’s instructions.
Specification Type Front loading washing machine Model name WD85T4***** Dimensions A (Width) 600 mm B (Height) 850 mm C (Depth) 650 mm D 730 mm E 1170 mm Water pressure 50 kPa ~ 800 kPa NET weight 68 kg Wash and spin capacity 8.5 kg Dry capacity 6.
WD85T4046CE_04215R-00_EN.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT AUSTRALIA 1300 362 603 (Other) 1300 425 299 (HHP) www.samsung.com/au/support DC68-04215R-00 WD85T4046CE_04215R-00_EN.
