Washer User manual WA52J8060A*/WA52J8700A* WA8000J_WA8700J_WA52J-03133Y-09_EN.
Contents Contents Safety information 4 What you need to know about the safety instructions Important safety symbols Important safety precautions 4 4 5 Installation 13 Unpacking your washer Overview of your washer Basic location requirements Important note to installer Step-by-step installation 13 14 16 20 20 Operating instructions 28 Loading your washer Getting started 28 29 Washing a load of laundry 30 Control panel Cycle overview Options Washing clothes using the cycle selector ATC (Auto Te
59 Fabric care chart Helping the environment Declaration of conformity Specification sheet Cycle chart 59 61 61 62 63 Contents Specifications SAVE THESE INSTRUCTIONS English 3 WA8000J_WA8700J_WA52J-03133Y-09_EN.
Safety information Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washer’s many benefits and features. What you need to know about the safety instructions Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.
Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it. Safety information These warning signs are here to prevent injury to yourself and others. Please follow them explicitly. After reading this manual, store it in a safe place for future reference.
Safety information Safety information 10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for 2 weeks or more, before using a washer or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas.
Do not install this appliance near a heater or flammable material. Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to direct sunlight or water (rain drops). Do not install this appliance in a location where gas may leak. • This may result in electric shock or fire. Safety information This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
Safety information Safety information Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm. • Failing to do so may result in electric shock or fire. Critical usage warnings WARNING If the appliance is flooded, cut the power immediately and contact your nearest service center. If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest service center.
Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire. Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children. • If a child places a bag over their head, the child may suffocate. Do not let children or infirm persons use this washer unsupervised. • Failing to do so may result in electric shock, burns or injury.
Safety information Safety information Open the faucet slowly after a long period of non-use. • The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage. If a drain error occurs during an operation, check if there is a draining problem. • If the washer is used when it is flooded because of a draining problem, it may result in electric shock or fire due to electric leakage. Do not insert your hand under the washer. • This may result in injury.
• Do not use other cycles for waterproof fabrics. This may result in injury or damage to the washer, walls, floor, or clothing due to abnormal vibrations. Set the temperature and spin according to the attached care label. Safety information • Do not operate the washer when the detergent dispenser is removed. • This may result in electric shock or injury due to water leakage. Do not insert your hand into the detergent dispenser after opening it. • This may result in injury as your hand may be caught.
Safety information Safety information • Place smaller items, such as lace socks and lingerie in the washing net. Do not use hardened detergent. • If it accumulates inside the washer, it may result in water leakage. Do not wash throw rugs or doormats. • If you wash throw rugs or doormats, the sand will accumulate inside the washer. It may result in error such as no draining. Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it.
Installation Follow these instructions carefully to ensure proper installation of the washer and to prevent accidents when using it. Unpacking your washer Installation Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown below. If your washer was damaged during shipping, or you do not have all of the items, contact 1-800-SAMSUNG (1-800-726-7864). To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.
Installation Overview of your washer Make sure all the parts are included in the product package. If you have a problem with the washer or the parts, contact a local Samsung customer center or the retailer. Installation 01 02 03 04 08 09 10 05 11 06 12 07 14 English WA8000J_WA8700J_WA52J-03133Y-09_EN.
01 Drain hose 02 Hose guide 03 Lid 04 Built-in sink 05 Tub 06 Water Jet 07 Leveling feet 08 Water hose (Cold) 09 Water hose (Hot) 10 Control panel 11 Detergent drawer 12 Power cord Parts supplied Installation Hose guide User manual Plastic zip hose tie Water intake cap Parts not supplied Water supply hoses Tools needed for installation Wrench Flat screwdriver Adjustable Plier Measuring tape Leveller NOTE • • • • If you lose an accessory and want to purchase a replacement, contact t
Installation Basic location requirements Electrical • Installation • • 120 Volt 60 Hz 15 AMP fuse or circuit breaker. Individual branch circuit serving only your Washer is recommended. Your washer is equipped with a power cord. CAUTION Never use an extension cord. WARNING An improperly connected equipmentgrounding conductor can increase the risk of electrical shock. Check with a qualified electrician or serviceman if you are not sure whether the appliance is properly grounded.
The water faucets must be within 4 feet (122 cm) to the back of your Washer to match the inlet hoses provided with your Washer. NOTE WARNING Check all connections at the water valve and faucet for leaks Drain facility The recommended height of the standpipe is 39 in (99 cm). The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached to the washer at the factory.
Installation Recessed area Side view - closet or confined area A E Installation A A B B A 1 in (2.5 cm) B 27.0 in (68.6 cm) A B C D A 21 in (53.3 cm) B 2 in (5.1 cm) C 29 7/16 in (74.4 cm) D 6 in (15.2 cm) E Gap between end of water valve and the wall • Case 1. Assemble supply hose after installing : Over 4 in (10 cm). • Case 2. Assemble supply hose before installing : Over 3 in (8 cm). 18 English WA8000J_WA8700J_WA52J-03133Y-09_EN.
Required dimensions for Installation B C Installation A A A 27.0 in (68.6 cm) B 39.2 in (99.5 cm) C 46.0 in (116.8 cm) 59.8 in (152.0 cm) A C A B B C A A 29.3 in (74.4 cm) B 46.0 in (116.8 cm) A* 48.0 in2 (310.0 cm2) B* 24.0 in2 (155.0 cm2) C 3.0 in (7.6 cm) NOTE * Required spacing English 19 WA8000J_WA8700J_WA52J-03133Y-09_EN.
Installation Important note to installer Please read the following instructions carefully before installing your washer. These instructions should be retained for future reference. We recommend you hire a professional to install this washer.
STEP 2 Connecting the water supply hose CAUTION B A CAUTION Installation Before installing the water supply hoses, make sure there are rubber gaskets (B) inside the couplings (A) at both ends of each new water hose. Installing the water supply hoses without rubber gaskets can cause water leakage. When you initially install the washer, be sure to use new hoses. Failing to do so may result in a water leakage or overflow and may damage your property.
Installation A B 1. Connect the ends of the water supply hoses to the hot and cold faucets. 2. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier. Installation CAUTION When you fasten the fittings, do not fasten them too tightly or apply tape or sealant to the faucets or water supply intakes. This can damage the fittings.
4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. CAUTION 5. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier. Installation The water supply hose connected to the hot faucet must be connected to the hot water supply intake and the water hose connected to the cold faucet must be connected to the cold water supply intake.
Installation STEP 3 Connecting the drain hose The end of the drain hose can be positioned in three ways: In a Wall standpipe or Floor standpipe A Installation The height of end of standpipe must be no lower than 39 in (99 cm) and no higher than 96 in (245 cm). If drain pipe are built into the wall with water valves (A), fasten the drain hose to the water hose. NOTE • C Make sure that the connection between the drain hose and the standpipe is not airtight.
NOTE * NOTE The drain hose can be installed to a 96 in (245 cm) maximum, but the draining capability can be reduced at this height. It can cause the washer to have an odor because of remaining water in the drain system. Installation A Connect the hose guide (A) within 3~5 in (7.6~12.7 cm)* from the end of the drain hose. If the drain hose is extended beyond the end of the hose guide, mold or microorganisms could spread inside the washer.
Installation 3. If the washer is level, the pulsator (A) is positioned at the center of the water as shown in the figure. If not, level your washer by turning the front leveling feet clockwise or counterclockwise as necessary. Installation NOTE Turn the front leveling feet clockwise (B) to lower the washer, and counterclockwise (C) to raise the washer.
STEP 6 Running a test cycle Run a test cycle as follows to check if your washer is properly installed. Load about 6 pounds of laundry into the tub. Press Power to turn on your washer. Select Rinse+Spin by turning the Cycle Selector. Press Start/Pause to start the test cycle. The washer should not rock or vibrate excessively when water is supplied or when washing or spinning, and should drain well during the spin cycle.
Operating instructions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Loading your washer • Operating instructions • • • • Fill the tub with dry, unfolded clothes evenly around in order to enhance washing efficiency and prevent excess wear, or wrinkling of the load. For optimal washing performance, make sure the laundry is piled up evenly.
To input a blanket Fold the blanket into the blanket-specific net as shown, and then insert in the tub below the plastic area of the tub. CAUTION To add a forgotten item: 1. Press Start/Pause to pause the washer. 2. Wait for the door to unlock automatically, and then open the door. 3. Add the item, close the door, and then press Start/Pause. The cycle will resume. Getting started Operating instructions Make sure the laundry is inserted completely.
Washing a load of laundry WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Control panel WA52J8060A* 02 06 Washing a load of laundry 01 10 07 11 08 12 09 13 03 04 14 15 05 WA52J8700A* 01 Cycle Selector Turn the Cycle Selector to select the desired cycle. The indicator by the cycle name lights up.
03 Temp. Press the button repeatedly to cycle through the different water temperature options. • Extra Hot (WA52J8700A*) - Heavily soiled, colorfast items. Only available with the Sanitize cycle. • Hot - Whites and heavily soiled, colorfast items. • Warm - Colorfast items. • Eco Warm - Moderately soiled, colorfast items; most wrinkle-free items. • Cold - Brightly colored, very lightly soiled items. • Tap Cold - Cold water with no warm water added.
Washing a load of laundry Washing a load of laundry 09 Fabric Softener Add an additional rinse at the end of the cycle to more thoroughly remove laundry additives and perfumes. 10 My Cycle Press and hold for 3 seconds to save your own cycle. Create and/or use a cycle you have customized temperature, spin speed, soil level, options, etc. 11 Delay End Delay the end of any cycle for up to 19 hours in one-hour increments. Displayed hour indicates the time the wash will be ended.
Cycle Description PERM PRESS For wash-and-wear, synthetic fabrics, and lightly to normally soiled garments. DEEP STEAM (WA52J8700A*) For heavily soiled, colorfast garments, this cycle provides a high washing temperature and steam and is effective for cleaning stains. For heavily soiled, colorfast garments. (less than 14lbs) SANITIZE (WA52J8700A*) NOTE If you select pause during the heating portion of the Sanitize Cycle, your Washer door will remain locked for your safety.
Washing a load of laundry Options Child Lock • Child Lock prevents children from playing with your washer. Activating the Child Lock function Press and hold Spin and Soil Level simultaneously for approximately 3 seconds. • When you activate the Child Lock function, the Child Lock indicator blinks. Washing a load of laundry Using the Child Lock function If the lid is opened when the Child Lock function is on, “dC” is displayed and an alarm sounds.
NOTE Garment Plus Adding laundry when Child Lock is on To add laundry, deactivate the Child Lock function. To deactivate the Child Lock function, press and hold Spin and Soil Level simultaneously for at least 3 seconds. See the “Pause Option” section on page 38 for additional details. You can add or take out laundry items even after the wash has started, as long as the Garment Plus indicator is on. Pressing Start/Pause unlocks the lid.
Washing a load of laundry NOTE You can change the My Cycle settings by repeating the process above. The last saved settings will be displayed the next time you choose the My Cycle function. NOTE If you press My Cycle and release it within 3 seconds, the previously saved cycle and options appear. If you press and hold My Cycle for 3 second or longer, the currently set cycle and options are saved and the LED blinks for 3 seconds.
Eco Plus This function sets the temperature somewhat lower than the typical washing cycle and extends the wash time slightly. With laundry time slightly extended, it’s possible to keep the same level of washing performance with cooler water. This function reduces energy consumption and maintains the quality of the wash. Mist Shower Smart Care This function enables you to check the status of the washer using a smartphone. 1.
Washing a load of laundry Washing a load of laundry Washing clothes using the cycle selector Your new washer makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed. Pause Option 1. Press Power. 2. Open the lid. 3. Load the articles of clothing one at a time loosely into the drum, without overfilling it. 4.
When the cycle is finished: After the total cycle has finished, the power will turn off automatically. 1. Open the lid. 2. Remove laundry. ATC (Auto Temperature Control) ATC is the control function that the washer controls water temperature with temperature sensor (thermistor). NOTE Washing a load of laundry Because there are numerous water temperatures depending on the customer’s environments (cold areas, warm areas, various water temperatures, settings of heater temperature, etc.
Washing a load of laundry The basics (WA52J8700A*) Prewash (Water Jet & Built-in sink) Water Jet and Built-in sink help you handwash before the washing machine starts operation. Water Jet is available only when the door is open with the water level set to less than High. For prewashing, use the Built-in sink that is designed to facilitate the hand-wash. Washing a load of laundry 1. With the door open, lower the Built-in sink . To open only the door, press and release the front right corner of the door.
[Water Jet drains] • • Select a cycle and press Start/Pause. Then the washing machine drains the water to be used during the prewash. When the washing machine is turned off before starting the wash cycle, it drains the water to be used during the prewash. However, when it is turned off during the wash cycle, it does not drain the water.
Washing a load of laundry Washing a load of laundry Detergent use Your washer is designed to use high efficiency (HE) detergents. • For the best cleaning results, use a high efficiency detergent such as Tide HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain suds suppressors that reduce or eliminate suds. When fewer suds are produced, the load tumbles more efficiently and cleaning is maximized. (* Brand names are trademarks of their respective manufacturers.
Features Automatic dispenser Your washer has separate compartments for dispensing detergent and color-safe bleach and fabric softener. Add all laundry additives to their respective compartments before starting your washer. The automatic dispenser must always be in place before you start your washer. DO NOT open the automatic dispenser when your washer is running. NOTE • • • To add detergent to the automatic dispenser: 1. Open the dispenser drawer. 2.
Washing a load of laundry Loading the Liquid (or Powder) detergent compartment A 1. Pour the recommended amount of laundry detergent directly into the detergent compartment before starting your washer. 2. If you are using color-safe bleach, add it with the detergent to the detergent compartment. NOTE When adding color-safe bleach with detergent, it is best if both laundry products are in the same form – liquid.
Loading the Bleach compartment (WA52J8060A*) CAUTION Use the liquid chlorine bleach only. B 1. Add chlorine bleach to the bleach compartment (B). DO NOT exceed the MAX FILL line. NOTE Avoid splashing or over–filling the compartment. • Your washer automatically dispenses bleach into the tub at the appropriate time. 2. The dispenser automatically dilutes liquid chlorine bleach before it reaches the wash load. • Never pour undiluted liquid chlorine bleach directly onto the load or into the tub.
Washing a load of laundry Loading the Bleach compartment (WA52J8700A*) CAUTION Use the liquid chlorine bleach only. B 1. Add chlorine bleach to the bleach compartment (B). DO NOT exceed the bleach compartment. NOTE • Washing a load of laundry • • Avoid splashing or over–filling the compartment. Never pour undiluted liquid chlorine bleach directly onto the load or into the tub. It is a powerful chemical and can cause fabric damage, such as weakening of the fibers or color loss, if not used properly.
Loading the fabric softener compartment C 1. Pour the recommended amount of liquid fabric softener into the softener compartment (C). For smaller loads, use less than one capful. 2. Dilute the fabric softener with water until it reaches MAX FILL in the compartment. 3. The dispenser automatically releases liquid fabric softener at the proper time during the rinse cycle. NOTE • • Use the softener compartment ONLY for liquid fabric softeners.
Maintaining your washer Cleaning the exterior 1. Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to your washer and prevent the unlikely possibility of damage from escaping water. Leave the lid open to allow the inside of your washer to dry out. 2. Use a soft cloth to wipe up all detergent, bleach or other spills as they occur. 3. Clean the following as recommended: Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads.
Preserving the top cover and the front frame Do not place any heavy or sharp objects or a detergent box on the washer. They can scratch or damage the top cover of the unit. NOTE Since the entire washer has a high-gloss finish, the surface can be scratched or damaged. Avoid scratching or damaging the surface when using the washer. Cleaning mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washer, and then unplug the power cord. 2. Close the faucet. 3.
Maintaining your washer 2. Push the ends of each side of the case at the same time. When you feel the ends push, pull out the dispenser drawer. Maintaining your washer 3. Remove the inserts from the 3 compartments. Rinse the inserts and the drawer with warm water to remove traces of accumulated laundry products. 4. To clean the drawer opening, use a small, non-metal brush to clean the recess. Remove all residue from the upper and lower parts of the recess. A B 5.
Self Clean Self Clean is a self-cleaning cycle that removes mold that may occur inside the washer. 1. Press Power. 2. Select Self Clean. Once Self Clean is selected, the only function that can be set is Delay End. 3. Press Start/Pause. Self Clean begins. CAUTION • • Using Self Clean, you can clean the drum without using a cleansing agent. Never use Self Clean when laundry is in the washer. This may cause damage to the laundry or a problem with the washer.
Troubleshooting Checkpoints If you encounter a problem with the washer, first check the table below and try the suggestions. Problem Does not turn on. Action • • • Make sure you use rated power for the product. Make sure the power cord is completely plugged in. Check the fuse or reset the circuit breaker. • • • Make sure the door is closed. Make sure the water taps are open. Make sure to press or tap Start/Pause to start the washing machine. Make sure Child Lock is not activated.
Problem Action • • Vibrates excessively or makes noise. • • • • • • • • • Stops. • • Plug the power cord into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the door, and press or tap Start/Pause to start the washing machine. For your safety, the washing machine will not spin unless the door is closed. Before the washing machine starts to fill, it will make a series of clicking noises to check the door lock and does a quick drain.
Troubleshooting Problem Action • • • • Fills with the wrong temperature water. • • • Door (Lid) locked or will not open. • Troubleshooting • • • • Does not drain and/ or spin. • • • • • Load is wet at the end of the cycle. • • Fully open both water taps. Make sure the temperature selection is correct. Make sure the hoses are connected to the correct water taps. Flush water lines. Disconnect the hoses and clean the screens. The hose filter screens may be clogged.
Problem Action • • • Leaks water. • • • • • Excessive suds. • • • • The spin basket or drain/supply hose is frozen. • • • • • • Stains on clothes. • Use high efficiency (HE) detergent to prevent oversudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended. Use warm water to disconnect the water supply hose and drain hose. Soak them in warm water. Fill the spin basket with warm water, and then wait for about 10 minutes.
Troubleshooting Problem Action • • • Has odours. Excessive suds collect in recesses and can cause foul odours. Run cleansing cycles to sanitize periodically. Dry the washing machine interior after a cycle has finished. If a problem persists, contact a local Samsung service center. Information codes The washer may display information codes to help you understand what is occurring with your washer better. No 1 Code 1C Meaning The WaterLevel sensor is not working properly.
No 4 Code Meaning 4C2 • Make sure the cold water supply hose is firmly connected to the cold water tap. If it is connected to the hot water tap, the laundry may be deformed with some cycles. 9C1 The electronic control needs to be checked (Over Voltage Error). • Check the PCB and wire harness. • Check if power is supplied properly. • If the information code remains, contact a customer service centre. 9C2 Low voltage detected • Check if the power cord is plugged in.
Troubleshooting No 11 Code LC Meaning Check the drain hose. • Make sure the end of the drain hose is placed on the floor. • Make sure the drain hose is not clogged. • If the information code remains, contact a customer service centre. NOTE When the washer displays “LC”, the washer do draining for 3 minutes. During this time, the Power button is inoperative. 12 OC Water is overflowed. • Restart after spinning. • If the information code remains on the display, contact a local Samsung service centre.
Specifications Fabric care chart The following symbols provide garment care direction. The clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems.
Specification Heat setting Dry-clean High Dry-clean Medium Do not dry-clean Low Line dry / Hang to dry Any heat Drip dry No heat / Air Dry flat Iron dry or steam temperatures High Medium Low Warning symbols for laundering Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Specification Do not iron 60 English WA8000J_WA8700J_WA52J-03133Y-09_EN.
Helping the environment • Your washer is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the lid so that animals and small children cannot get trapped inside the appliance. • • • Do not exceed the detergent quantities recommended in the detergent manufacturers’ instructions.
Specification Specification sheet C A B D Type Top loading washer Model name Dimensions (inches (cm)) WA52J8060A* A. Height 46.0 (116.8) B. Width 27.0 (68.6) C. Height with lid open 59.8 (152.0) D. Depth 29.3 (74.4) Water pressure (psi (kPa)) NET weight (kg (lb)) 20 - 116 (137 - 800) 66 (145.5) Spin revolution 67 (147.7) 1100 rpm Washing 120 V 700 W Spin 120 V 400 W Drain 120 V 80 W Specification Heater rating WA52J8700A* 62 English WA8000J_WA8700J_WA52J-03133Y-09_EN.
Cycle chart Use this chart to set the best cycle and options for you laundry. WA52J8060A* NOTE Setting Temp. Spin Soil Level : factory setting H: Hot EH: Extra High H: Heavy : can be selected W: Warm H: High EW: Eco Warm M: Medium N: Normal C: Cold L: Low TC: Tap Cold NS: No Spin L: Light Temp.
Specification Options Cycle AquaJet™ Extra Rinse Deep Clean Eco Plus Fabric Softener SPIN RINSE+SPIN Delay End Pre Soak Specification SELF CLEAN My cycle 64 English WA8000J_WA8700J_WA52J-03133Y-09_EN.
Cycle chart Use this chart to set the best cycle and options for you laundry. WA52J8700A* NOTE Setting Temp. Spin Soil Level : factory setting EH: Extra Hot EH: Extra High H: Heavy : can be selected H: Hot H: High W: Warm M: Medium N: Normal EW: Eco Warm L: Low C: Cold NS: No Spin L: Light TC: Tap Cold Cycle Temp.
Specification Options Cycle AquaJet™ Extra Rinse Deep Clean Eco Plus Fabric Softener My cycle Delay End Pre Soak WATERPROOF QUICK WASH BEDDING DELICATES SPIN RINSE+SPIN Specification SELF CLEAN 66 English WA8000J_WA8700J_WA52J-03133Y-09_EN.
Warranty (U.S.A) SAMSUNG WASHER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor, Three (3) years stainless tub part (Part Only), Ten (10) years washing DD motor part (Part Only).
Warranty (U.S.A) This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
To obtain warranty service, please contact SAMSUNG at: Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English 69 WA8000J_WA8700J_WA52J-03133Y-09_EN.
Warranty (CANADA) SAMSUNG WASHER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor, Ten (10) years washing DD motor (Part only).
This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
Warranty (CANADA) To obtain warranty service, please contact SAMSUNG at: Samsung Electronics Canada Inc. 2050 Derry Road West Mississauga, Ontario L5N 0B9 Canada 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. 72 English WA8000J_WA8700J_WA52J-03133Y-09_EN.
Memo WA8000J_WA8700J_WA52J-03133Y-09_EN.
Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) MEXICO 01-800-SAMSUNG (726-7864) www.samsung.com/mx/support DC68-03133Y-09_EN WA8000J_WA8700J_WA52J-03133Y-09_EN.