Washer User manual WA45M3100A* / WA45N3050A* WA3100M_DC68-03850A-05_EN.
Contents Contents Safety information 4 What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions 4 4 5 5 Installation 13 Unpacking your washer Overview of your washer Basic location requirements Important note to installer Step-by-step installation 13 14 16 20 21 Operating instructions 28 Loading your washer Getting started 28 30 Washing a load of laundry 31 Control panel Cycle overview Options Washing clothes u
42 Cleaning the exterior Cleaning the interior Storing your washer Preserving the top cover and the front frame Cleaning mesh filter Cleaning the dispensers Self Clean 42 42 42 43 43 44 46 Troubleshooting 47 Checkpoints Information codes 47 52 Specifications 55 Fabric care chart Helping the environment Declaration of conformity Specification sheet Cycle chart 55 57 57 58 59 Contents Maintaining your washer English 3 WA3100M_DC68-03850A-05_EN.
Safety information Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washer’s many benefits and features. What you need to know about the safety instructions Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.
Safety information These warning signs are here to prevent injury to yourself and others. Please follow them explicitly. After reading this manual, store it in a safe place for future reference. Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it.
Safety information Safety information 9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode. 10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
Safety information This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line. • Improper grounding may result in electric shock, fire, an explosion, or problems with the product. • Never plug the power cord into a socket that is not grounded correctly. Make sure the socket you use is grounded in accordance with local and national codes. Do not install this appliance near a heater or flammable material.
Safety information Safety information Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm. • Failing to do so may result in electric shock or fire. Critical usage warnings WARNING If the appliance is flooded, cut the power immediately and contact your nearest service center. If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest service center.
Safety information Do not turn the appliance off by unplugging the power plug while the washer is in operation. • Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire. Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children. • If a child places a bag over their head, the child may suffocate. Do not let children or infirm persons use this washer unsupervised.
Safety information Safety information Usage cautions CAUTION If the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp, soft cloth. • Failing to do so may result in discoloration, deformation, damage or rust. The clear portion of the lid can be broken by a strong impact. Take care when using the washer. • If the clear portion is cracked or broken, it may result in injury.
Safety information Do not operate the appliance with wet hands. • This may result in electric shock. Do not spray volatile material such as insecticide onto the surface of the appliance. • As well as being harmful to humans, it may also result in electric shock, fire, or problems with the product. Do not place an object that generates a electromagnetic field near the washer. • This may result in injury due to a malfunction.
Safety information Safety information Do not use hot water from water cooling/heating devices. • This may result in problems with the washer. Do not use natural hand-washing soap in the washer. • If it hardens and accumulates inside the washer, it may cause problems with the product, discoloration, rust, or bad odors. Do not wash large laundry items such as bedding in the washing net. • Failing to do so may result in injury due to abnormal vibrations.
Installation Follow these instructions carefully to ensure proper installation of the washer and to prevent accidents when using it. WARNING Certain internal parts are intentionally not grounded and may present a risk electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve, heater and pump. Installation Unpacking your washer Unpack your washer and inspect it for shipping damage.
Installation Overview of your washer Installation Make sure all the parts are included in the product package. If you have a problem with the washer or the parts, contact a local Samsung customer center or the retailer. 06 07 01 08 02 09 03 04 05 01 Drain hose 02 Hose guide 03 Detergent drawer 04 Power cord 05 Leveling feet 06 Water hose (Cold) 07 Water hose (Hot) 08 Control panel 09 Lid 14 English WA3100M_DC68-03850A-05_EN.
Parts supplied Hose guide User manual Plastic zip hose tie Water intake cap Installation Parts not supplied Water supply hoses Tools needed for installation Wrench Flat screwdriver Adjustable Plier Measuring tape Leveller NOTE • • • • If you lose an accessory and want to purchase a replacement, contact the Samsung service center (1-800-SAMSUNG (1-800-726-7864)). The design of the parts and accessories may differ from the pictures above.
Installation Basic location requirements Electrical • Installation • • 120 Volt 60 Hz 15 AMP fuse or circuit breaker. Individual branch circuit serving only your Washer is recommended. Your washer is equipped with a power cord. CAUTION Never use an extension cord. WARNING An improperly connected equipmentgrounding conductor can increase the risk of electrical shock. Check with a qualified electrician or serviceman if you are not sure whether the appliance is properly grounded.
Drain facility To correctly fill your Washer in the proper amount of time, water pressure of 20 to 116 psi (137 to 800 kPa) is required. Water pressure less than 20 psi may cause water valve failure, or may not allow the water valve to shut off completely, or may extend the fill time beyond what your Washer controls allow, causing your Washer to turn off. A time limit is built into the controls to prevent flooding in your home if a hose becomes loose.
Installation Alcove or closet installation Side view - closet or confined area Minimum clearances for closet and alcove installations: E Installation A Sides 1 in / 25 mm Closet front 2 in / 51 mm Rear 6 in / 152 mm Top 21 in / 533 mm If the washer and dryer are installed together, the closet front must have at least a 72 in² (465 cm²) unobstructed air opening. Your washer alone does not require a specific air opening. B C D Recessed area A A B B A 1 in (2.5 cm) B 27.0 in (68.
Required dimensions for Installation A C Installation B A A 27.0 in (68.6 cm) B 40.4 in (102.7 cm) (WA45M3100A*) 39.3 in (99.8 cm) (WA45N3050A*) C 45.1 in (114.6 cm) (WA45M3100A*) 43.9 in (111.7 cm) (WA45N3050A*) A 59.3 in (150.5 cm) (WA45M3100A*) 58.1 in (147.6 cm) (WA45N3050A*) C A B B C A A 29.3 in (74.4 cm) B 45.1 in (114.6 cm) (WA45M3100A*) 43.9 in (111.7 cm) (WA45N3050A*) A* 48.0 in2 (310.0 cm2) B* 24.0 in2 (155.0 cm2) C 3.0 in (7.
Installation Important note to installer Please read the following instructions carefully before installing your washer. These instructions should be retained for future reference. We recommend you hire a professional to install this washer.
Step-by-step installation STEP 1 Selecting a location NOTE Installation Before you install the washer, make sure the location: • Has a hard, level surface without carpeting or flooring that may obstruct ventilation. • Is away from direct sunlight. • Has adequate ventilation. • Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C). • Is away from heat sources such as oil or gas. • Has enough space so that the washer doesn’t rest on its power cord.
Installation A B 1. Connect the ends of the water supply hoses to the hot and cold faucets. 2. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier. Installation CAUTION When you fasten the fittings, do not fasten them too tightly or apply tape or sealant to the faucets or water supply intakes. This can damage the fittings.
4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. CAUTION Installation The water supply hose connected to the hot faucet must be connected to the hot water supply intake and the water hose connected to the cold faucet must be connected to the cold water supply intake. 5. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier.
Installation STEP 3 Connecting the drain hose The end of the drain hose can be positioned in three ways: In a Wall standpipe or Floor standpipe A Installation The height of end of standpipe must be no lower than 39 in (99 cm) and no higher than 96 in (245 cm). If drain pipe are built into the wall with water valves (A), fasten the drain hose to the water hose. NOTE • C Make sure that the connection between the drain hose and the standpipe is not airtight.
NOTE * Installation A Connect the hose guide (A) within 3~5 in (7.6~12.7 cm)* from the end of the drain hose. If the drain hose is extended beyond the end of the hose guide, mold or microorganisms could spread inside the washer. NOTE The drain hose can be installed to a 96 in (245 cm) maximum, but the draining capability can be reduced at this height. It can cause the washer to have an odor because of remaining water in the drain system.
Installation 3. If the washer is level, the pulsator (A) is positioned at the center of the water as shown in the figure. If not, level your washer by turning the front leveling feet clockwise or counterclockwise as necessary. Installation NOTE • • B Turn the front leveling feet clockwise (B) to lower the washer, and counterclockwise (C) to raise the washer. Number of leveling feet may differ depending on the models. C 26 English WA3100M_DC68-03850A-05_EN.
STEP 5 Powering your washer Installation Plug the power cord into a 3-prong, well grounded 120 volt 60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. Your washer is grounded through the third prong of the power cord when plugged into a three-prong grounded electrical outlet. Test run Make sure that you install your washer correctly by running the RINSE + SPIN after the installation is complete.
Operating instructions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Loading your washer • Operating instructions • • • • Fill the tub with dry, unfolded clothes evenly around in order to enhance washing efficiency and prevent excess wear, or wrinkling of the load. For optimal washing performance, make sure the laundry is piled up evenly.
To input a blanket Fold the blanket into the blanket-specific net as shown, and then insert in the tub below the plastic area of the tub. CAUTION Operating instructions Make sure the laundry is inserted completely. • Any exposed part of the laundry may cause damage to the machine or the laundry itself, or a water leak. • Do not overload the tub. Make sure no part of the laundry is exposed outside of the tub. To add a forgotten item: 1. Press START/PAUSE to pause the washer. 2.
Operating instructions Operating instructions Getting started 1. Load your washer. 2. Add liquid (or powder) detergent and additives to the dispenser (see the "Detergent use" section on page 37). 3. Select the appropriate cycle and options for the load (see the "Washing a load of laundry" section page 31). 4. Close the lid. 5. Press START/PAUSE. 6. The Wash Indicator illuminates. 7. The estimated cycle time will appear in the display. The time may fluctuate to indicate the time remaining in the cycle.
Washing a load of laundry WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Control panel 02 05 06 01 03 04 Turn the Cycle Selector to select the desired cycle. The indicator by the cycle name lights up. 02 Display Provides instructions and diagnostics while keeping you updated on the cycle status and time remaining. 03 Temp.
Washing a load of laundry 04 Water Level The water level is Extra high. However, you can select the water level manually by pressing this button. Spin Only: This cycle runs a spin cycle only. Press and hold Water Level for 3 seconds. 05 POWER Press once to turn your washer on. Press again to turn your washer off. If the washer is left on for more than 10 minutes without any buttons being pressed, the power automatically turns off. 06 START/PAUSE Press to pause and restart cycles.
Cycle Description RINSE + SPIN Use for loads that need rinsing only or to add rinse-added fabric softener to a load. SELF CLEAN Use to clean dirt and bacteria from the tub. Regular use (after every 20 washes) is recommended. Options Child Lock • Activating the Child Lock function Press and hold the Temp. and Water Level buttons simultaneously for approximately 3 seconds. • Child Lock disables the START/PAUSE button while the washer is operating. • The Child Lock Indicator blinks.
Washing a load of laundry To add laundry, deactivate the Child Lock function. To deactivate the Child Lock function, press and hold Temp. and Water Level simultaneously for at least 3 seconds. See the “Pause Option” section on page 35 for additional details. WARNING If a child enters the washer, the child may become trapped and suffocate. CAUTION • Washing a load of laundry Deactivating the Child Lock function Press and hold both Temp. and Water Level simultaneously for approximately 3 seconds.
Washing clothes using the cycle selector Your new washer makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed. Pause Option 1. Press POWER. 2. Open the lid. 3. Load the articles of clothing one at a time loosely into the drum, without overfilling it. 4. Add liquid (or powder) detergent, softener, and/or bleach (if necessary) to the appropriate compartments.
Washing a load of laundry ATC (Auto Temperature Control) ATC is the control function that the washer controls water temperature with temperature sensor (thermistor). NOTE Washing a load of laundry Because there are numerous water temperatures depending on the customer’s environments (cold areas, warm areas, various water temperatures, settings of heater temperature, etc.), ATC function in our washer maintains the certain level of wash temperature to output the best washing performance at each cycle.
Detergent use Washing a load of laundry Your washer is designed to use high efficiency (HE) detergents. • For the best cleaning results, use a high efficiency detergent such as Tide HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain suds suppressors that reduce or eliminate suds. When fewer suds are produced, the load tumbles more efficiently and cleaning is maximized. (* Brand names are trademarks of their respective manufacturers.) WARNING Regular detergent is not recommended.
Washing a load of laundry Features Automatic dispenser Your washer has separate compartments for dispensing detergent and color-safe bleach and fabric softener. Add all laundry additives to their respective compartments before starting your washer. The automatic dispenser must always be in place before you start your washer. DO NOT open the automatic dispenser when your washer is running. NOTE • • Washing a load of laundry • Never exceed the manufacturer’s recommendations when adding detergent.
Loading the Liquid (or Powder) detergent compartment A 1. Pour the recommended amount of laundry detergent directly into the detergent compartment before starting your washer. 2. If you are using color-safe bleach, add it with the detergent to the detergent compartment. NOTE When adding color-safe bleach with detergent, it is best if both laundry products are in the same form – liquid.
Washing a load of laundry Loading the Bleach compartment CAUTION Use the liquid chlorine bleach only. B 1. Add chlorine bleach to the bleach compartment (B). DO NOT exceed the bleach compartment. NOTE • Washing a load of laundry • • Avoid splashing or over–filling the compartment. Never pour undiluted liquid chlorine bleach directly onto the load or into the tub. It is a powerful chemical and can cause fabric damage, such as weakening of the fibers or color loss, if not used properly.
Loading the fabric softener compartment C 1. Pour the recommended amount of liquid fabric softener into the softener compartment (C). For smaller loads, use less than one capful. 2. Dilute the fabric softener with water until it reaches MAX FILL in the compartment. 3. The dispenser automatically releases liquid fabric softener at the proper time during the rinse cycle. NOTE • • Use the softener compartment ONLY for liquid fabric softeners.
Maintaining your washer WARNING Certain internal parts are intentionally not grounded and may present a risk electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve, heater and pump. Cleaning the exterior 1. Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to your washer and prevent the unlikely possibility of damage from escaping water.
Preserving the top cover and the front frame Do not place any heavy or sharp objects or a detergent box on the washer. They can scratch or damage the top cover of the unit. NOTE Since the entire washer has a high-gloss finish, the surface can be scratched or damaged. Avoid scratching or damaging the surface when using the washer. Cleaning mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washer, and then unplug the power cord. 2. Close the faucet. 3.
Maintaining your washer Cleaning the dispensers The automatic dispenser may need to be cleaned periodically due to laundry additive buildup. 1. Pull the dispenser drawer straight back until it stops. Maintaining your washer 2. Tilt the dispenser drawer upward and remove it. 3. Remove the inserts from the 3 compartments. Rinse the inserts and the drawer with warm water to remove traces of accumulated laundry products. 44 English WA3100M_DC68-03850A-05_EN.
4. To clean the drawer opening, use a small, non-metal brush to clean the recess. Remove all residue from the upper and lower parts of the recess. A B 5. Return the inserts to the proper compartments and replace the drawer by placing the dispenser drawer rail (B) on top of the compartment rail (A) (Tilt the dispenser drawer downward and insert it). Then push the drawer in firmly and slowly. Maintaining your washer English 45 WA3100M_DC68-03850A-05_EN.
Maintaining your washer Self Clean Certain usage and environmental conditions may result in some residue build-up or odor in the washer tub. To prevent this build-up of residue or odor causing bacteria and keep your washer tub fresh and clean, perform the SELF CLEAN cycle at least once a month or every 20 cycles. Perform the recommended procedure below when using the SELF CLEAN cycle. 1. Remove all items from the washer tub and ensure the tub is empty.
Troubleshooting Checkpoints If you encounter a problem with the washer, first check the table below and try the suggestions. Problem Does not turn on. Action • • • Make sure you use rated power for the product. Make sure the power cord is completely plugged in. Check the fuse or reset the circuit breaker. • • • Make sure the door is closed. Make sure the water taps are open. Make sure to press or tap START/PAUSE to start the washing machine. Make sure Child Lock is not activated.
Troubleshooting Problem Action • • Vibrates excessively or makes noise. • • • • • • • • • Stops. • Troubleshooting • • Make sure the washing machine is set on a level floor. If the floor is not level, use the levelling feet to adjust the washing machine. Make sure the washing machine is not contacting any other object. Make sure the laundry load is balanced. Make sure the laundry is spread evenly in the washing machine. Spread out the laundry evenly and start again.
Problem Action • • • • Fills with the wrong temperature water. • • • Door (Lid) locked or will not open. • • • • • • • • • • Load is wet at the end of the cycle. • • While the washing machine is operating, press or tap START/ PAUSE to stop the washing machine. It may take a few moments for the door lock mechanism to disengage. Check the fuse or reset the circuit breaker. Make sure the electrical voltage is normal. Make sure the washing machine is plugged in.
Troubleshooting Problem Action • • • Leaks water. • • • • • Excessive suds. • • • • The spin basket or drain/supply hose is frozen. • • • Troubleshooting • Water drains out immediately. • • Make sure all hose connections are tight. Make sure the water supply hose's rubber packing is in the correct position. Screw tightly again. Make sure the end of the drain hose is correctly inserted and secured to the drain system. Avoid overloading. Use high efficiency (HE) detergent to prevent oversudsing.
Problem Action • Stains on clothes. • • Has odours. • • • Select an appropriate cycle for the laundry. Use the Heavy Duty cycle for stained clothes. Apply a recommended amount of detergent as instructed by the detergent manufacturer. Clean the magic filter (if it comes with your washer) on a regular basis. Excessive suds collect in recesses and can cause foul odours. Run cleansing cycles to sanitize periodically. Dry the washing machine interior after a cycle has finished.
Troubleshooting Information codes The washer may display information codes to help you understand what is occurring with your washer better. No Code Meaning 1 Hot LED Flashes Lid is open when washer is running. • Close the lid tightly and restart the cycle. • If the information code remains, contact a customer service center. 2 Warm LED Flashes Communication error between SUB PBA and MAIN PBA. • If the information code remains, contact a customer service center.
No Code Meaning Your Washer has tried to fill but has not reached the proper water level. 6 High LED Flashes 7 Mid LED Flashes 8 Low LED Flashes 9 Hot & Warm LEDs flash NOTE When the High LED is flashing, the washer drains for 3 minutes. During this time, the POWER button is inoperative. • If the information code remains, contact a customer service center. A fault is detected in the water level sensor. If the information code remains, contact a customer service center.
Troubleshooting No Code 13 Hot & High LEDs flash Door lock is not working properly. • Close the lid tightly and restart the cycle. • If the information code remains, contact a customer service center. 14 Hot & Mid LEDs flash Thermistor is not working properly. • If the information code remains, contact a customer service center. Hot & Low LEDs flash The temperature of the supplied water is so high. • Ensure that the cold water tap and the hot water tap are connected correctly.
Specifications Fabric care chart The following symbols provide garment care direction. The clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems.
Specification Heat setting Dry-clean High Dry-clean Medium Do not dry-clean Low Line dry / Hang to dry Any heat Drip dry No heat / Air Dry flat Iron dry or steam temperatures High Medium Low Warning symbols for laundering Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Specification Do not iron 56 English WA3100M_DC68-03850A-05_EN.
Helping the environment • Your washer is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the lid so that animals and small children cannot get trapped inside the appliance. • • • Do not exceed the detergent quantities recommended in the detergent manufacturers’ instructions.
Specification Specification sheet C A B D Type Top loading washer Model name WA45M3100A* WA45N3050A* A. Height Dimensions (inches (cm)) WA45N3050A* : 43.9 (111.7) B. Width 27.0 (68.6) C. Height with lid open 59.3 (150.5) D. Depth 29.3 (74.4) Water pressure (psi (kPa)) 20 - 116 (137 - 800) NET weight (kg (lb)) 57.0 (125.7) Spin revolution 700 rpm Heater rating Specification WA45M3100A* : 45.1 (114.
Cycle chart Use this chart to set the best cycle and options for you laundry. NOTE Setting Temp. Water Level : factory setting H: Hot EH: Extra High : can be selected W: Warm H: High EW: Eco Warm M: Mid C: Cool L: Low CD: Cold AL: Auto Level Functions Cycle Temp.
LIMITED WARRANTY (U.S.A.) SAMSUNG WASHER LIMITED WARRANTY TO ORIGINAL CONSUMER PURCHASER WITH PROOF OF PURCHASE This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
This limited warranty covers manufacturing defects in materials or workmanship encountered in normal household, noncommercial use of this product and shall not cover the following: damage that occurs in shipment, delivery, installation, and uses for which this product was not intended; damage caused by unauthorized modification or alteration of the product; product where the original factory serial numbers have been removed, defaced, changed in any way, or cannot be readily determined; cosmetic damage inclu
LIMITED WARRANTY (U.S.A.) LIMITATION OF REMEDIES YOUR SOLE AND EXCLUSIVE REMEDY IS PRODUCT REPAIR, PRODUCT REPLACEMENT, OR REFUND OF THE PURCHASE PRICE AT SAMSUNG’S OPTION, AS PROVIDED IN THIS LIMITED WARRANTY.
Warranty (CANADA) SAMSUNG WASHER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor.
Warranty (CANADA) This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
To obtain warranty service, please contact SAMSUNG at: Samsung Electronics Canada Inc. 2050 Derry Road West Mississauga, Ontario L5N 0B9 Canada 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English 65 WA3100M_DC68-03850A-05_EN.
Memo 66 English WA3100M_DC68-03850A-05_EN.
Memo English 67 WA3100M_DC68-03850A-05_EN.
Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) DC68-03850A-05 WA3100M_DC68-03850A-05_EN.