User Manual
ENGLISH
37
Advanced Shooting
Selecting an effect
1. Set power switch to CAMERA mode and LOCK/STANDBY switch to STANDBY mode.
2. Press MENU ON/OFF button, the MENU list will appear.
3. Turn MENU dial to DSE SELECT.
4. Press ENTER.
- Now the DSE setting is possible.
5. Turn MENU dial to the desired DSE effect.
6. Press ENTER.
■ The selected DSE effect will now be visible in the Viewfinder.
■ After selecting MAKE-UP, STROBE or LSS press ENTER,
- in MAKE-UP mode, MENU list for selecting RED/YELLOW
/GREEN/BLUE will appear.
- in STROBE mode, MENU list for selecting 25 field(1)/12
field(2)/ 6 field(3) will appear.
- in LSS mode, MENU list for selecting 1/25(1), 1/12(2), 1/6(3) will appear.
Select the shutter speed and then press ENTER.
■ To change the content of the selection, place the cursor on the corresponding position by turning
MENU dial and press ENTER again.
7. To end the setting, press MENU ON/OFF button.
Recording DSE in CAMERA mode
1. Set power switch to CAMERA mode and LOCK/STANDBY switch to
STANDBY mode.
2. Press START/STOP button.
■ Recording should start.
3.
Press DSE button during recording to record an effect you have selected.
■ Any effect you have selected should appear.
4. To return to normal, press DSE button again.
DIS ......................OFF
D.ZOOM ..............OFF
DEMO ..................OFF
PROGRAM AE
DSE SELECT
WHITE BALANCE
MAKE-UP ........RED
EMBOSS YELLOW
WIDE(16:9) GREEN
CINEMA BLUE
NEG.
MIRROR
MAKE-UP
EMBOSS
WIDE(16:9)
CINEMA
NEG.
MIRROR