THERMAL NETWORK CAMERA User Manual TNO-4030T/TNO-4040T/TNO-4041T TNO-4050T/TNO-4051T TNO-4030TR/TNO-4040TR/TNO-4041TR
Thermal Network Camera User Manual Copyright ©2018 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
overview Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth. (Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents as they may deform or cause damage to the product.) 7.
overview Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location. When used outside of the U.S.
CONTENTS overview 6 7 8 9 9 installation & connection 10 network connection and setup 18 10 11 13 14 14 18 18 19 19 20 20 22 22 23 23 Important Safety Instructions Recommended PC Specifications Recommended Micro SD/SDHC/SDXC Memory Card Specifications NAS recommended specs What’s Included (TNO-4030T/4040T/4050T /4030TR/4040TR) What’s Included (TNO-4041T/4051T/4041TR) At a Glance (TNO-4030T/4040T/4050T/4030TR /4040TR) At a Glance (TNO-4041T/4051T/4041TR) 24 24 24 24 Connecting to the Camera Passwo
overview Recommended PC Specifications NAS recommended specs •• CPU : Intel(R) Core(TM) i7 3.4 GHz or higher •• RAM : 8G or higher •• Supported OS : MS Windows, Mac OS X •• Recommended browser: Google Chrome Supported browsers: MS Explorer, MS Edge, Mozilla Firefox (Window 64bit only), Apple Safari (Mac OSX only) •• Recommended capacity : 200GB or higher is recommended. •• Simultaneous access : One unit of NAS can accept a maximum of sixteen camera accesses.
What’s Included (TNO-4030T/4040T/4050T/4030TR/4040TR) Please check if your camera and accessories are all included in the product package. (As for each sales country, accessories are not the same.
overview What’s Included (TNO-4041T/4051T/4041TR) Appearance Please check if your camera and accessories are all included in the product package. (As for each sales country, accessories are not the same.) Appearance of the Be ware CAUTION: and Polarity Rated Voltageconnection.
At a Glance (TNO-4030T/4040T/4050T/4030TR/4040TR) Appearance & Components d e R T L IN OU T INE IO OU 1:L ND IO IN OU T T2 2:G UD M 3:A UDND M OU 4:A M 5:G LAR 6:A LAR 7:A LAR 8:A 12 34 56 Appearance & Components 78 abc f g ●● overview ab c At a Glance (TNO-4041T/4051T/4041TR) d ef hi Item Description a b c d e Network Port Used to connect the PoE or Ethernet cable for network connection. Power Port Used to plug the power cable.
installation & connection Installation (TNO-4030T/4040T/4050T/4030TR/4040TR) 6. Adjust the camera direction using the L wrench provided. camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are JJ `` This recommended to install this product below the edge of eaves to prevent the cable from being externally exposed. you adjust the camera position using a bracket, please loosen the JJ `` When bracket screw, adjust the camera, and tighten it.
4. Insert the LAN cable into the large hole made by removing the projected part of the rubber plug in step 1 above. Outdoor installation R IN L OUT NE D OUT DIO 1:LI IN OUT 2 DIO 2:GN D 3:AU OUT 4:AU ARM 5:GN ARM 6:AL ARM 7:AL 8:AL 78 When you install it outside of the building, please waterproof it with waterproof butyl rubber tape (can be purchased in stores) so that water does not leak from the gap of the cable connected to the outside. 7. Connect the finished cable to the Ethernet port. 2.
installation & connection Installation 1. Use the star-shaped wrench to separate the PT bracket from the main body. Connecting waterproof power cable and LAN cable 1. Pick off the extruded part of the rubber cover on the bottom side of the bottom cover as shown in the figure below. left an appropriate cable bush for the LAN cable to JJ `` Use be connected. center -- Basic camera : Use the cable with a diameter of right Ø5~6.5. -- Components provided : Use the cable with a diameter of Ø7~8.5. 2.
Inserting/Removing a Micro SD Memory Card JJ Removing a Micro SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. `` Disconnect the power cable from the camera before inserting the Micro SD memory card. Otherwise, it may damage the Micro SD memory card. `` When it rains or the humidity is high, insertion or ejection of a Micro SD card is not recommended.
installation & connection Memory Card Information (Not Included) What is a memory card? Connecting with other Device The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices.
Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Connecting Wi-Fi (TNO-4030T/4040T/4050T/4030TR/4040TR) 1. Connect OTG adapter (5-pin) and WiFi dongle to the micro USB terminal. Smartphone Setup 1. Install the Wisenet Installation application. 3. Run the Wisenet Installation application. 4. When you log in to the camera, the video will be connected. (initial password: 4321) `` The video will be played without being logged in during the initial connection. 5.
installation & connection Connecting to Audio Input/Output Connecting to the I/O port box Connect the Alarm I/O cable to the corresponding port of the port box. Speaker Microphone PC Network Sensor Alarm (Warning lamp) R IN L OUT NE O OUT O 1:LI ND IN OUT 2 2:G UDI M 3:A UDI M OUT 4:A ND M 5:G LAR 6:A LAR 7:A LAR 8:A Microphone Amp Microphone 12 34 56 78 Amp Microphone Microphone Speaker Amp Speaker Amp Speaker Speaker 1.
RS-485 setup (TNO-4041T/4051T/4041TR) All these operations above mentioned will be enabled only if the network camera is properly connected to the pan/tilt-compliant receiver. And the serial port for the pan/tilt operations should be properly specified.
network connection and setup You can set up the network settings according to your network configurations. Connecting the Camera Directly to Local Area Networking Connecting the Camera Directly to a DHCP Based DSL/Cable Modem Connecting to the camera from a local PC in the LAN INTERNET 1. Launch an Internet browser on the local PC. Camera 2. Enter the IP address of the camera in the address bar of the browser. DSL/Cable Modem External Remote PC DDNS Server (Data Center, KOREA) Camera 1.
Connecting the Camera Directly to a PPPoE Modem This is for a small network environment such as homes, SOHO and ordinary shops. INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) INTERNET Camera 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect to the web viewer. 4.
network connection and setup Buttons used in IP Installer a b c d Item e f g Description Scans for cameras with the IPv6 setting. Activated in an IPv6 compliant environment only. i IPv6 j Search Scans for cameras that are currently connected to the network. However, this button will be grayed out if neither IPv4 nor IPv6 is checked. k l m Auto Set The IP Installer automatically configures the network settings. Manual Set You should configure the network settings manually.
If not using a Broadband Router If the Broadband Router has more than one camera connected 4. In the pane, provide necessary information. •• HTTP Port : Used to access the camera using the Internet browser, defaulted to 80. •• VNP Port : Used to control the video signal transfer, defaulted to 4520. ex) For setting , , and , contact your network administrator.
network connection and setup Dynamic IP Setup Dynamic IP Environment Setup •• Example of the Dynamic IP environment -- If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server 3. When done, click [Save Settings]. Your settings will be saved. MM `` Above sample instructions are based on the CISCO’s Broadband Router. `` The settings may differ depending on the connected Broadband Router model. For more information, refer to the user manual of the applicable router.
Connecting to the Camera from a Shared Local PC 1. Run the IP Installer. It will scan for connected cameras and display them as a list. ●● network connection and setup 2. Double-click a camera to access. The Internet browser starts and connects to the camera. to the camera can also be gained by typing the camera’s IP MM `` Access address in the address bar of the Internet browser.
web viewer Connecting to the Camera Normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100 http://192.168.1.100 - the Login dialog should appear. • IP address (IPv6) : 2001:230:abcd: ffff:0000:0000:ffff:1111 http://[2001:230:abcd:ffff:0000:0000:ffff:1111] - the Login dialog should appear. Password setting When you access the product for the first time, you must register the login password.
appendix Specification Items 640x480 NETD Focal Length (Zoom Ratio) Max. Aperture Ratio Angular Field of View Operational Privacy Masking Flip / Mirror Remote control USB : Micro USB type B, 1280x720, for installation 13mm fixed F1.0 19mm fixed 35mm fixed CVBS : 1.
appendix Items Bitrate Control Method Streaming Capability Audio Compression Format Audio Communication IP Protocol TNO-4030T TNO-4040T H.264/H.265 : CBR or VBR Description TNO-4050T TNO-4041T TNO-4051T MJPEG : VBR Multiple Streaming (Up to 10 Profiles) G.711 u-law /G.726 Selectable Security Streaming Method Max.
Items Uncooled Micro bolometer Effective Pixels 640x480 NETD Video Out Focal Length (Zoom Ratio) Lens <50mK Alarm I/O CVBS : 1.0 Vp-p / 75Ω composite, 720x480(N), 720x576(P), for installation USB : Micro USB type B, 1280x720, for installation 13mm fixed 19mm fixed H:48.6˚/V:36.4˚/D:61.6˚ H:32˚/V:24.3˚/D:39.
appendix Items Bitrate Control Method Streaming Capability Audio Compression Format Audio Communication IP Protocol TNO-4030TR H.264/H.265 : CBR or VBR Description TNO-4040TR TNO-4041TR MJPEG : VBR Multiple Streaming (Up to 10 Profiles) G.711 u-law /G.726 Selectable Security Streaming Method Max.
Product Overview TNO-4030T/4040T/4050T/4030TR/4040TR TNO-4041T/4051T/4041TR Unit : mm (inch) Unit : mm (inch) ●● appendix English _29
appendix Troubleshooting PROBLEM PROBLEM When an Windows 10 user accesses the web viewer through Chrome or Firefox, the sound volume of microphone changes periodically. No video is displayed when accessing the plug-in free webviewer on Safari via HTTPS. SOLUTION yy This is what happens when microphone driver has been set to Realtek driver. Install the High Definition Audio device (Windows Default Driver) or the third party driver as the microphone driver.
Open Source Announcement GPL/LGPL software license If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged. Component Name License Base Kernel Busybox iproute2-4.3.0 iptables-1.4.21 ethtool-4.2 mtd-1.5.2 mii-diag-2.11 rp-pppoe-3.11 wpa_supplicant-2.5 bash-4.3.30 zeroconf GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 3.0 GPL 2.
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4.
2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.
patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. yy Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
1.11. "Source Code" means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributor’s choice.
provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12. RESPONSIBILITY FOR CLAIMS. As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis.
16. "Patch for Modification" means a difference, program, system, or the like in order to create the Modified Source Code from the Source Code or the Binary Code thereof. 17. "Vicarious Execution of Patch Processing" means vicarious execution service to create the Modified Source Code applying the Patch for Modification to the Source Code or the Binary Code thereof. 18. "Source Code User" means a person who uses the Source Code. 19.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
PHP 3.01 License The PHP License, version 3.01 Copyright (c) 1999 - 2010 The PHP Group. All rights reserved. Component Name License URL php-5.2.17 PHP 3.01 http://www.php.net/distributions Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
MEMO
Head Office 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82.70.7147.8753 Fax : +82.31.8018.3740 www.hanwha-security.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 www.hanwhasecurity.com Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel +44.1932.57.8100 Fax +44.1932.57.8101 www.hanwha-security.
