Spec Sheet
FEATURES
› 10/100 Mbps Ethernet
• 10/100 BASE-T/TX electrical port
• 100 BASE-FX optical port
› Electrical port supports Auto-Negotiation for 10 Mbps or 100
Mbps, full duplex or half duplex data.
› Power Sourcing Equipment (PSE): Provides IEEE
802.3af/802.3at 30 watts P
oE+ for high
output demand applications of
remote Ethernet equipment
› Optical port supports 100 Mbps full duplex data
› Automatic MDI/MDI-X crossover
› Distances up to: 3 km (2 mi) Multimode
20 km (12 mi) Single Mode
› Transparent to data encoding/compatible with major data
protocols
› Tested and certified by an independent laboratory for full
compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration,
humidity with condensation, high-line/low-line voltage
conditions and transient voltage protection) of NEMA TS-1/
TS-2 and CALTRANS Traffic Signal Control Equipment
Specifications
› ST or SC optical connectors
› 1 or 2 fiber design
› PoE Models DC powered, non-PoE models AC/DC powered
› Voltage transient protection on all power and signal input/
output lines provides protection from power surges and
other voltage transient events.
› No in-field optical adjustments required
› LED Indicators
› Standard size is hot-swappable rack module
› Standard size is interchangeable between stand-alone or rack
mount use
› IEEE 802.3 compliant
APPLICATIONS
› 10/100 Mbps Ethernet Media Converter
› High Speed Computer Links
The Ethernet media converter series are one-channel Ethernet electrical to optical
media converters. These auto-negotiating devices accept a 10/100 Mbps electrical
input and convert this to a 100 Mbps optical output. This series of media converters
use multimode and single-mode optical fiber and one and two fiber SC and ST
optical connectors. LED indicators confirm operational status. All models are
environmentally hardened with no electrical or optical adjustments (Plug and Play).
The standard size units may be either wall or rack mounted. Non-PoE units are
powered by an included DC power supply. PoE models provide full compliance with
IEEE 802.3at as Power Sourcing Equipment (PSE), with a maximum power of 30
watts, making them ideal for those applications where the remote equipment draws
significant power.
T
he TMC-F Series standard size units may be directly plugged into the SBP-C14 /
SBP-C03 Rack or operated as a standalone module. The TMC-F-M small size units
operate as standalone modules only.
10/100 Mbps Ethernet Electrical To Optical Media Converters
with Optional 30W PoE
TMC-F Series
INCLUDED CONVERTER 1POWERED
-40º TO +75º
FIRST EDITION
08-2019 © 2019 Hanwha Techwin Co., Ltd.
All rights reserved.