DVD-VCR SV-DVD40 SV-DVD50 SV-DVD55 Instruction Manual STANDBY/ON OPEN/CLOSE EJECT STANDBY/ON PROG DVD VCR AUX OK www.samsungvcr.
Safety Precautions Contents ◆ FOREWORD CAUTION ■ RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. DANGER ■ ■ ■ This symbol is intended to alert you to the presence of dangerous voltage within the product.
Contents (cont.) Safety Instructions The following illustrations represent precautions. ◆ DVD FUNCTIONS Using the TV Buttons on the Remote Control ...................................................... Choosing a Connection ................................................................................. Disc Menu Language..................................................................................... Audio Language ....................................................................................
Disc Type and Characteristics Front View of the DVD-VCR ( SV-DVD 40 ) This DVD player is capable of playing the following types of discs with the corresponding logos : Disc Types (Logos) Recording Disc Size Types DVD 12 Cm Audio + Video 8 Cm AUDIO-CD Max. Playing Time Characteristics Single-sided 240 min. Double-sided 480 min. Single-sided 80 min. Double-sided 160 min. • DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.
Rear View of the DVD-VCR Infrared Remote Control ( SV-DVD 40 ) ( SV-DVD 40 ) AV2 (DEC./EXT.) SCART (EURO-21) SOCKET DIGITAL AUDIO OUT SOCKET (COAXIAL) AUDIO L, R OUT SOCKETS STANDBY/ON AERIAL IN CONNECTOR OPEN/CLOSE 1 18 4 5 6 7 2 19 AV2 (DEC./EXT) TV 20 3 AV1 (EURO AV) 21 S-VIDEO OUT JACK 4 AV1 (EURO AV) IN/OUT SCART (EURO-21) SOCKET OUT TO TV CONNECTOR VIDEO OUT SOCKET ( SV-DVD 50/ SV-DVD 55) DIGITAL AUDIO OUT SOCKET (COAXIAL) 5 22 6 23 7 24 25 8 9 AV2 (DEC./EXT.
Display Indicators Infrared Remote Control ( SV-DVD 50/ SV-DVD 55) 1 STANDBY/ON OPEN/CLOSE 1 18 1 2 3 4 5 6 7 2 19 20 3 4 21 5 22 6 23 7 24 25 8 9 13 14 15 16 17 18 19 20 21 22 23 26 24 10 11 12 8 9 10 11 12 13 14 15 16 17 OK 27 28 29 30 31 32 33 25 26 27 28 29 30 31 32 33 STANDBY/ON SHUTTLE << / >> CLEAR DVD TV MUTE. AUDIO VOLUME +/– REWIND SKIP BACK STOP SUBTITLE MENU UP LEFT DOWN SPEED SP/LP RECORD TIMER ANGLE IPC OPEN/CLOSE 0-9 TV/VCR VCR, TV SELECT INPUT SEL. F.
Deciding How to Connect DVD-VCR Connecting DVD-VCR to the TV using the Coaxial Cable To receive television programmes a signal must be received from one of the following sources: º ◆ ◆ ◆ ◆ You must take into account various factors when connecting audio or video systems: ◆ Types of connectors available on your systems ◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily (camcorder for example) ☛ Your DVD-VCR is equipped with the following connectors.
Connecting DVD-VCR to a Satellite Receiver or Other Equipment You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities. 1. AV1(EURO AV): By means of 21-pin Scart Cable Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the DVD-VCR.
Tuning Your Television for the DVD-VCR You must tune your television for the DVD-VCR only if you are not using a Scart cable ➢ STANDBY/ON OPEN/CLOSE To view pictures from your DVD-VCR when a Scart cable is used, the television must be set to the audio/video mode (AV). Deck Control Keys The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck.
Basic TV Tuner Operations Inserting Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: The following buttons are used when watching television via the DVD-VCR’s built-in TV tuner. ◆ Find that the remote control is no longer working correctly 1 TV/VCR Button Press to switch between your TV’s tuner and the VCR’s internal tuner. 1 2 Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control.
Setting the Menu Language 1 Open “MENU” After pressing the MENU, press the OK or ❿ . 1 OK 2 Select “Language” Use the or ❷ buttons to highlight “Language,” then press the OK or ❿ . 3 Set menu Language Place the selection arrow next to your desired Language, then press the OK button. Language : English 4 Install User Set Auto Power Off Screen Messages : Off : On 5 Press the or ❷ buttons to select language you want.
VCR Presetting the Stations Manually ☛ Language : English Install User Set Auto Power Off Screen Messages : Off : On Manual Setup VCR Output CH You do not need to preset the stations manually if you have already set them automatically. 1 After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed. 2 Press the corresponding option. 3 Press the OK or ❿ to select this option. Result: The Install menu is displayed. 4 Press the corresponding Setup option is selected.
VCR Changing the Preset Station Table You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences. Language : English Install User Set Auto Power Off Screen Messages 1 After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed. 2 Press the corresponding option. 3 Press the OK or ❿ buttons to select this option. Result: The Install menu is displayed. 4 Press the corresponding Setup option is selected.
VCR Selecting the Colour Mode Language Before recording or playing back a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO.
VCR VideoPlus+ Extend ★(SV-DVD 50/SV-DVD55 Only) Language To prevent delays or over-runs the VCR has a function called VideoPlus Extend allowing you to extend the recording time by up to 60 minutes. : English ➢ Install User Set Auto Power Off Screen Messages : Off : On User Set Colour System : Auto NICAM IPC VideoPlus Extend : On : On : Off VCR Only use if PDC is not available or set to OFF. 1 After pressing the MENU, press the OK or ❿ . 2 Press the corresponding option.
VCR Repeat Play You can set repeat play to repeat the tape continuously from beginning to end. Language 1 : English After pressing the MENU, press the corresponding to select the VCR option. , ❷ buttons Install User Set Auto Power Off Screen Messages 2 : Off : On : E180 Repeat Play S-VHS : Off : Off Press the corresponding Play option is selected. 4 To... Press OK or ❿, until... Repeat play On is displayed. Do not wish to repeat play Off is displayed.
VCR Protecting a Recorded Cassette VCR Recording a Programme with Automatic Stop Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. 1 If you wish to protect a cassette, break off the tab using a small screwdriver. 2 To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape. This function enables you to record up to nine hours (LP) of programmes.
Using the VideoPlus Feature ★(SV-DVD50/SV-DVD55 Only) VCR VCR Modifying VideoPlus Programming OK Before presetting your DVD-VCR: ◆ Switch on both the television and your DVD-VCR ◆ Check that the date and time are correct ◆ Insert the cassette on which the programme is to be recorded (safety tab intact) 1 Timer Method Standard Up to six programmes can be preset.
VCR Using the Timer Programming Feature Timer Method Standard The Timer Programming feature allows you to preset the DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset.
VCR This function allows you to play back any pre-recorded cassette. 2 3 1 Switch on both the television and your DVD-VCR. 2 Insert the video cassette to be played. If the safety tab on the cassette is intact, press ❿ll. Otherwise, the cassette is played automatically. ➢ 3 EJECT 3 AUX VCR Selecting the Audio Output Mode Playing a Cassette When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking).
VCR Playing a Sequence Frame by Frame You can: Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when recording starts. ◆ Stop the cassette at a given frame (image) ◆ Advance one frame at a time ➢ The Search function allows you to fast-forward or rewind to a specific index and start playback from that point.
VCR Searching for a Specific Sequence Intro Scan The tape counter: 1 After pressing the SEARCH, press the corresponding buttons, until the Intro Scan option is selected. 2 Press the OK or ❿ . 3 Press the ➛➛ or ❿❿ buttons depending on the direction where your desired programme is located. 4 When an Index mark is found the DVD-VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.
VCR Connecting an RCA Audio/Video Input Cable You can connect other audio/video equipment to your DVD-VCR using audio/video cables if the appropriate outputs are available on the equipment chosen. DVD Examples: ◆ You wish to copy a video cassette with the help of a second VCR (see page 45). ◆ You wish to play back and/or copy pictures taken with a camcorder (see page 45.
STANDBY/ON Your DVD-VCR remote control will work with Samsung televisions and compatible brands. OPEN/CLOSE To determine whether your television is compatible, follow the instructions below. 1 2 2 1 Switch your television on. 2 Point the remote control towards the television. 3 Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate numeric buttons.
DVD Disc Menu Language To set the Disc Menu Language to your preferred language, follow these steps. If your preferred language is available on a DVD, your Disc Menu Language will automatically be set to the language you choose. Setup Setup Display Setup Setup : 1 Open “MENU” To set the Subtitle Language to your preferred language, follow these steps. If your preferred language is available on a DVD, your Subtitle Language will automatically be set to the language you choose.
DVD MPEG-2 Digital Out If your A/V receiver is equipped with a MPEG-2 decoder, your DVD-VCR can output MPEG-2 sound, but you MUST enable this feature in the menu system to prevent damage to your speakers. Setup Setup Display Setup Setup : 1 Open “MENU” Dynamic Compression constrains the dynamic range, i.e. the difference between the quietest and loudest passages of a DVD soundtrack.
DVD TV Aspect Ratio Set the aspect ratio (length x width) of your TV screen so the DVD player will display movies at the appropriate size for your television. Choose from standard, letterbox, or widescreen format. Setup Setup Display Setup Setup : 1 1 2 Open “MENU” 2 Select “DVD” Use the or ❷ buttons to highlight “DVD ” then press the OK or ❿ buttons. Display Setup 3 : PAL 60Hz : RGB 4 5 Highlight “Display Setup,” then press the OK or ❿ buttons.
DVD Parental A/V Receiver Connections Rating Control is a password protected system that allows you to block playback of DVDs based on their content. The system uses an eight level rating system. • If you try to play a DVD that exceeds the selected rating, an error message will appear. • Not all discs are rated. Setup Setup Display Setup Setup : . 1 . Open “MENU” With the DVD in stop mode, press the MENU button.
DVD Special Playback Features During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the ❿ll (Play/Still) button. 2 1 1 2 Many DVDs feature their own menu systems, where you can select Titles, Chapters, Audio Tracks, Subtitles, and special disc features, such as movie trailers, and information on the cast. Use these buttons to make selections in the Disc menus. Still 3 1 • The picture will still and the audio will mute.
DVD EZ View - For 4:3 aspect ratio discs • Normal Wide Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched. • Screen Fit The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched. • Zoom Fit The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
DVD DVD Subtitle Angle View Some DVD Movies provide you with various camera angle views on the same scene while they are showing. To activate the feature press the ANGLE Button. OK Some DVDs provide subtitles in one or more languages. You can use the SUBTITLE button to quickly view and change settings. 1 Open Subtitle Menu 1 During playback, press the SUBTITLE button. 1 Check the Angle Icon You’ll see the Angle Icon while watching a DVD with multi Angles available.
DVD A to B Repeat DVD Repeat Chapter/Title OK A to B Repeat feature enables you to repeat the designated section on a DVD or CD. To activate, mark where to start(A) and where to end(B) of the section you want to watch. OK 1 1 Select A-B Repeat Function 2 2 Off Mark the Starting Point • Once you select Point A, “B” will be highlighted. 3 Mark the Ending Point 4 Chapter Title A - B Off Track Disc A - B Repeat Chapter Select “Title” Use the ➛ , ❿ buttons to select “Title”.
DVD Marks MP3/WMA Play Up to three Bookmarks can be inserted for a given DVD, allowing you to quickly jump to your favorite scene or song. OK 1 Open Mark Menu During playback, press the MARK button on the remote control. The “MARK” header will be displayed on the screen. 1 2 • The placeholder you select 1 – – 64 CLEAR MP3/WMA Play Function 1. When the first song file is playing, the music file menu will appear on the right side of the screen. Up to 8 music folders can be displayed at a time.
MP3/WMA Play Program Play & Random Play CD-R MP3/WMA discs When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R above, plus the comments below: • Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. These two formats are the most widely used. • When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as the file extension.
Picture CD Playback Picture CD Playback • Select JPEG in the menu to view a Photo CD. • To change the currently playing media, press the STOP ( ■ ) button twice and then press the DISC MENU button. • If no button on the remote controller is pressed for 60 seconds, the menu will disappear and the selected item will be played. Album 1. Open the disc tray. 2. Load the disc on the tray. - Load the disc with the labeled side up. 3. Close the tray.
Technical Specifications General Problems and Solutions (VCR) Rated voltage 220 - 240V, 50Hz Power consumption 23 Watts Weight 4.5 Kg Size 430mm X 330mm X 100mm Operating ambient temperature +5°C ~ +35°C Installation conditions Operation position : Horizontal, Relative humidity : Below 75% Input Before contacting the Samsung after-sales service, perform the following simple checks. Problem Explanation/Solution No power ◆ ◆ Check that the power plug is connected to a wall outlet.
72 P47 P49 P50 ◆ The icon appears on screen. ◆ Forgot password If you experience other problems. ◆ ◆ The features or action cannot be completed at this time because: 1. The DVD’s software restricts it. 2. The DVD’s software doesn’t support the feature (e.g., angles). 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number or search time that is out of range.
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced. 2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part. 3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.
