User Manual

ENG-8
Connecting Your VCR to the TV
using the SCART Cable
Connecting a Decoder for scram-
bled PAY TV broadcasts
SCART Cable
Aerial Connector
You can connect your VCR to the television using the
SCART cable if the appropriate input is available on the
television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your VCR
☛ ◆ Regardless of the type of connection chosen,
you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible
on the screen when the VCR is switched off.
◆ Make sure that both the television and the VCR
are switched off before connecting the cables.
You can connect your VCR to a Hi-Fi system.
Example
: You wish to take advantage of the quality of
your Hi-Fi stereo system when watching a
programme or recording via your VCR.
★
(SV-675F/SV-671F only)
1 Connect the coaxial cable as indicated in the above
section.
2 Connect one end of the SCART cable to the
AV1(EURO AV) socket on the rear of the VCR.
3 Plug the other end into the appropriate connector
on the television.
4 Plug the RCA Audio cable with stereo system into
the Audio out socket on the rear of the VCR.
★
(SV-675F/SV-671F only)
This VCR is fully equipped to receive scrambled Pay TV
broadcasts.
Example
: CANAL+ or Premiere broadcasts.
You can:
◆ Record a scrambled programme while watching
another channel
◆ Record another channel while watching a
scrambled programme
☛ When the DECODER is connected to the
AV2 socket, AV2 SET must be set to DEC.
1 Connect the VCR to the television as indicated on
page 7.
2 Plug the SCART cable with the decoder into the
AV2 (DEC./EXT.) socket on the rear of the VCR.
3 Plug the other end into the decoder.
Aerial
TV
R
L
AV1 (EURO AV)
AV2 (SATELLITE IN)
SCART
Cable
RF coaxial cable
TV
4
2
TV
R
L
AV1 (EURO AV)
AV2 (SATELLITE IN)
TV
2
Satellite Receiver or other
Equipment
SCARTC
able
3
Aerial
02119C SV-675F/XEB-ENG 3/15/04 10:46 AM Page 8