User Manual
ENG-25
The tape counter:
◆ Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the VCR
◆ Allows you to find the beginning of a sequence
easily
☛ If the remaining time is to be calculated
correctly, you must indicate the type of cassette
being used.
1 Insert a cassette in your VCR.
2 To set the tape counter to zero at the beginning of
a sequence:
◆ Press DISP./ or DISPLAY twice to display
the counter
◆ Press CLR/RST when you want to set the
tape counter to zero
3 When you are ready,
◆ Start playback or Recording.
◆ Press the
■
button.
◆ To fast-froward or rewind to the sequence at
which the counter was set to zero, press
➛➛
or
❿❿
.
➢
Some VCR information, such as the counter, can
be displayed on the television screen (unless you
have deactivated the OSD mode; refer to page
15).
Press DISP./ or DISPLAY:
◆ Once to display the current function,
programme number, recording speed,
date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining
on the cassette
◆ Four times to clear the display
You can connect other audio/video equipment
to your VCR using audio/video cables if the
appropriate outputs are available on the
equipment chosen.
Examples
:
◆ You wish to copy a video cassette with the
help of a second VCR.
◆ You wish to play back and/or copy pictures
taken with a camcorder.
☛ ◆ Make sure that both the television and
the VCR are switched off before
connecting the cables.
1 Connect one end of the RCA audio/video cable
into the VIDEO socket on the front of the VCR.
2 Plug the other end of the audio/video cable into
the appropriate output connector on the other
system (VCR or camcorder).
3 Connect one end of the RCA audio cable into the
AUDIO sockets on the front of the VCR.
➢Take care to respect the colour coding of the
left and right channels.
4 Plug the other end of the audio cable into the
appropriate output connectors on the other
system (VCR, camcorder or Hi-Fi sound system).
Connecting an RCA Audio/Video Input
Cable
★
(SV-675F/SV-671F Only)
Using the Tape Counter
02119C SV-675F/XEB-ENG 3/15/04 10:46 AM Page 25