User Manual

ENG-22
Playing a Sequence Frame by
Frame
You can:
◆ Stop the cassette at a given frame (image)
◆ Advance one frame at a time
➢ No sound is heard when playing back frame
by frame.
1 Press:
◆ ❿
II
to start playing the cassette
◆ ❿
II
to stop the tape at a given frame
◆
F.ADV ( )
to advance frame by frame
2 To return to normal playback, press ❿
II
.
☛ When you have been using the Frame-by-
Frame function for more than about five
minutes, the VCR will automatically play to
protect the cassette and video heads.
➢ Vertical stability: When playing back frame
by frame, interference may be seen on the
screen. Press the V-LOCK ( )
buttons to minimize this effect.
F.ADV
V-LOCK
You can play a cassette in slow motion.
➢ No sound is heard when playing back
a cassette in slow motion.
1 Press:
◆ ❿
II
to start playing the cassette
◆ SLOW ( ) as many times as required
to decrease or increase the speed respectively
◆
T
o return to the normal speed, press the ❿
II
button twice.
2 When playing back in slow motion, picture
interference may occur. Press the PROG/TRK
(  or ❷ ) / TRK ( or ) buttons to minimize
this effect.
☛ When you have been using the Slow Motion
function for more than about five minutes,
the VCR will automatically play to protect
the:
◆ Cassette
◆ Video heads
Selecting the Colour Mode Playing a Cassette in Slow Motion
Selecting the Audio Mute Mode
★
(SV-471F/SV-275F/ SV-271F
Only)
SLOW
Before recording or playing back a cassette,
you can select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
➢ ◆ When playing back a cassette, the
standard is automatically selected by the
VCR.
◆ When you playback an NTSC-recorded
tape on this VCR make a setting on the
colour system according to your TV. If
your TV is a PAL system only TV, set
NTPB. If your TV is Multi System TV
(NTSC 4.43 compatible), set NT4.43 and
you can record NT4.43.
1 Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to
select the USER SET option.
3 Press the OK button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding  or ❷ buttons, until
the COLOUR SYSTEM option is selected.
5 Press the ❿ button to select AUTO ➝ PAL ➝
SECAM ➝ MESECAM ➝ N/B.
AUTO When playing back a cassette, the system
standard is automatically selected by the
VCR.
B/W Black and White
6 On completion, press MENU twice to exit the
menu.
You can select the mode in which the sound is
mute.
To select the audio mute mode on and off, simply
press the AUDIO button on the remote control.
02119C SV-675F/XEB-ENG 3/15/04 10:46 AM Page 22