User Manual

ENG-19
Cancelling a Preset Recording
Checking a Preset Recording
You can check your preset recordings:
◆ When you have finished presetting the VCR
◆ If you have forgotten which programmes
will be recorded
1 Insert the cassette. Press the TIMER button.
Press the
 or ❷ buttons to select the
STANDARD option and then press the ❿ button or,
◆ Press MENU on the remote control.
Result: The programming menu is displayed.
◆ Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
2 Press the  or ❷ buttons to select the required
programme.
3 Press the ➛ or ❿ buttons to select and change
any values as required. For more details, refer to
the previous page.
4 On completion, press MENU twice.
You can cancel any programmes that are:
◆ Incorrect
◆ No longer required
1 Insert the cassette. Press the TIMER button.
Press the  or ❷ buttons to select the
STANDARD option and then press the ❿ button or,
◆ Press MENU on the remote control.
Result: The programming menu is displayed.
◆ Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
2 Select the programme to be cancelled by
pressing the  or ❷ buttons.
3 Press the CLR/RST button to cancel the selected
programme.
Result: All the recording information is deleted
and the broadcast will not be recorded.
4 On completion, press MENU twice.
This function allows you to play back any pre-
recorded cassette.
1 Switch on both the television and your VCR.
2 Insert the video cassette to be played. If the
safety tab on the cassette is intact, press
❿
II
.
Otherwise, the cassette is played automatically.
➢ When a cassette is loaded, the tape position
is optimized automatically to reduce
disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape
is reached, the cassette is rewound
automatically. NTSC tapes can be played
back but cannot be recorded with this VCR.
3 To... Then press...
Stop the playback
■
(STOP).
Eject the cassette (EJECT).
Playing a Cassette
The Picture Alignment feature enables you to
optimize the tape position automatically to
obtain the best possible picture.
When noise bars or streaks appear during playback,
adjust picture alignment by pressing the A.TRK
button.
Result: ◆ The tracking bar appears.
◆ The picture is automatically adjusted.
◆ The tracking bar disappears when
digital auto tracking has been
completed.
The Picture Alignment feature allows you to
adjust the alignment manually to obtain the
best possible picture.
When noise bars or streaks appear during playback,
adjust alignment manually by pressing the
PROG/TRK (  or ❷ ) / TRK ( or ) buttons
until the picture is clear and stable.
Result: ◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when
you release the button.
Adjusting Picture Alignment
Automatically
★
(SV-671F/SV-471F
/SV-275F/SV-271F Only)
Adjusting Picture Alignment
Manually
02119C SV-675F/XEB-ENG 3/15/04 10:46 AM Page 19