User Manual

G
User’s Manual
67
Note
Up to 10,000 logs each for System Logs and Event Logs can be saved. If the
number of either log exceeds 10,000, the system automatically deletes the oldest
logs.
The following chart displays the various log types.
<System Log>
Log Type Description
Power On Power was turned on.
Power Off Power was turned off.
System Rebooting System re-booted.
Record On Started to record video.
Record Off Finished recording video.
HDD Format An HDD was formatted.
Camera Connection A camera was connected.
Config Changed Product configuration was changed.
HDD Full Capacity limit for HDD was reached/exceeded.
HDD Added An HDD was added.
HDD Removed Removing HDD.
RAID Build Start Started building a RAID array.
RAID Build Finish Completed building a RAID array.
RAID Unbuild A RAID array has been removed.
RAID Rebuild Start RAID was rebuilt.
Event Group Created An Event Group was created.
Event Group Deleted An Event Group was deleted.
Key Lock On Key Lock was locked.
Key Lock Off Key Lock was unlocked.
HDD Test HDD disk-checking was performed.
Log File Export A log was exported.
Firmware Update Firmware was updated.
Set Default Set Default was executed via Web Viewer.
Factory Reset Factory Reset was performed using the front panel button.
RAID Error A RAID error occurred.
HDD Check Error An HDD checking error occurred.
HDD I/O Error An HDD encountered an I/O error.
Upgrade Error A firmware update error occurred.
Fan Fail The system's fan failed.
Network Status Connection to network was either lost or re-established.
Camera Connection Error An error occurred while connecting to a camera.