User Manual

G
Network Video Recorder SRN-6450/3250, SNR-6400/3200
60
the following chart, and then click Play. When using the default RTSP port
number, 554, you may skip entering the port number.)
Video Type Address
Live
Unicast rtsp:.//<IP>:<Port>/ch<channel>_mpeg4.stw
Multicast rtsp://<IP>:<Port>/mch<channel>_mpeg4.stw
Recorded
Unicast
rtsp://<IP>:<Port>/ch<channel>_mpeg4_
<YYYY>_<MMDD>_<HHMM>.stw
Multicast
rtsp://<IP>:<Port>/ch<channel>_mpeg4_
<YYYY>_<MMDD>_<HHMM>.stw
i.e.) If the Monitor Ethernet Port IP address is 192.168.1.10 with the RTSP port
as 3000, enter rtsp://192.168.1.10:3000/ch1_mpeg4_2009_0405_0930.stw
to watch a video from Channel 1 that is recorded on April 5, 2009 at 9:30am
You can register your e-mail address in the Network Setup screen, so your product can notify
you with an e-mail when a defined Event occurs. Please Refer to "4.6.3. Event Setup"(Page
44) Enter an outgoing e-mail server address under SMTP Server Name, and an e-mail address
under E-Mail To. If your mail server requires authentication for sending e-mail, check User
Authentication. Enter your login ID and password for your mail server in ID and Password.
Note
To use the E-Mail option, the Monitor Ethernet Port must be connected to a mail
server.
Note
New network settings are applied only if you click .