User Manual

G
User’s Manual
27
.
Select Internet Protocol (TCP/IP.) Click the Properties button then in the Internet Protocol
(TCP/IP) Settings dialog, click the Advanced button to open the Advanced TCP/IP Settings
dialog. (If the "Obtain an IP address automatically" option is checked under the Internet
Protocol (TCP/IP) Properties window, please click the "Use the following IP address" radio
button option before proceeding.)
Click Add under IP addresses then enter 192.168.1.xxx. The NVR uses 192. 168. 1. 100 as the
IP address; you cannot use the address for your computer's internal IP address.