Motherboard P7H55D-M PRO
E5320 Second Edition January 2010 Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents....................................................................................................................... iii Notices ....................................................................................................................... vii Safety information..................................................................................................... viii About this guide.................................................................................................
Contents 2.5.5 2.6 2.7 2.5.6 2.9 Connectors................................................................................................ 2-23 2.7.1 Rear panel connectors............................................................... 2-23 2.7.3 Internal connectors.................................................................... 2-28 3.2 Turning off the computer.......................................................................... 2-35 Updating BIOS........................................
Contents 3.5.7 3.5.8 DRAM Timing Control ............................................................... 3-17 3.5.10 CPU Clock Skew........................................................................ 3-19 3.5.9 3.5.11 3.5.12 3.5.13 3.5.14 3.5.15 3.5.16 3.5.17 3.5.18 3.6 3.5.19 DRAM Voltage .......................................................................... 3-20 CPU PLL Voltage....................................................................... 3-20 PCH Voltage.........................
Contents Chapter 4: 4.1 4.2 4.3 Support DVD information........................................................................... 4-1 4.2.1 4.2.2 Running the support DVD............................................................ 4-1 Obtaining the software manuals.................................................. 4-2 Software information.................................................................................. 4-3 4.3.1 ASUS PC Probe II.......................................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Electrical safety • • • • • • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
P7H55D-M PRO specifications summary CPU LGA1156 socket for Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® processors Supports Intel® Turbo Boost Technology* * The Intel Turbo Boost Technology support depends on the CPU types. ** Refer to www.asus.com for Intel CPU support list Chipset Intel® H55 Express Chipset Memory 4 x DIMM, max. 16GB, DDR3 2133(O.C.
P7H55D-M PRO specifications summary ASUS Unique Features ASUS Exclusive Overclocking Features: - TurboV - Turbo Key - GPU Boost ASUS Xtreme Design ASUS Power Solutions: - ASUS EPU - 4+2 Phase Power Design ASUS Express Gate ASUS Quiet Thermal Solution: - ASUS Stack Cool 3 - ASUS Fanless Design: Heat-sink solution - ASUS Fan Xpert ASUS EZ DIY: - ASUS Q-DIMM - ASUS O.C.
P7H55D-M PRO specifications summary Back Panel I/O Ports 1 x PS/2 Keyboard port (purple) 1 x HDMI Output 1 x DVI-D Output 1 x D-Sub Output 1 x Optical S/PDIF Out 1 x RJ45 port 6 x USB 2.0/1.1 ports 8-channel Audio I/O Internal I/O Connectors 3 x USB connectors support additional 6 USB ports 1 x IDE connector 6 x SATA 3.
xiv
Chapter 1 Chapter 1: 1.1 Product introduction Welcome! Thank you for buying an ASUS® P7H55D-M PRO motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items.
1.3 Special features 1.3.1 Product highlights Intel® LGA1156 Lynnfield / Clarkdale Processor Ready Chapter 1 This motherboard supports the latest Intel® Lynnfield and Clarkdale processors in LGA1156 package, which has memory and PCI Express controller integrated to support 2-channel (4 DIMMs) DDR3 memory and 16 PCI Express 2.0 lanes providing great graphics performance. Intel® Lynnfield and Clarkdale processors are the most powerful and energy efficient CPUs in the world.
Green ASUS 1.3.2 Chapter 1 This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating environment-friendly and recyclable products/packagings to safeguard consumers’ health while minimizing the impact on the environment. ASUS Overclocking Features TurboV Feel the adrenaline rush of real-time O.C. – now a reality with the ASUS TurboV. This easy O.C.
1.3.5 ASUS Quiet Thermal Solutions Chapter 1 ASUS Quiet Thermal solution makes system more stable and enhances the overclocking capability. Up to 20°C(36°F) Cooler - Stack Cool 3 Stack Cool 3 is a fanless cooling solution offered exclusively by ASUS. It effectively and noiselessly transfers heat generated by the critical components to the other side of the specially designed PCB (printed circuit board) for effective heat dissipation - making temperatures cooler by up to 20°C.
ASUS EZ-Flash 2 Chapter 1 Simply update BIOS from a USB flash drive before entering the OS EZ Flash 2 is a user-friendly BIOS update utility. Simply launch this tool and update BIOS from a USB flash drive before entering the OS. You can update your BIOS only in a few clicks without preparing an additional floppy diskette or using an OS-based flash utility. Refer to page 3-4 for details.
Chapter 1 1-6 Chapter 1: Product Introduction
Chapter 2 Chapter 2: 2.1 Before you proceed Hardware information Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
2.2 Motherboard overview 2.2.1 Motherboard layout Chapter 2 Refer to 2.7 Connectors for more information about rear panel connectors and internal connectors.
Layout contents Connectors/Jumpers/Slots Page 1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 2-33 2. LGA1156 CPU Socket 2-5 3. CPU, chassis, and power fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1, 3-pin PWR_FAN) 2-31 4. DDR3 DIMM slots 2-10 5. Intel H55 Serial ATA connectors (7-pin SATA 1-6) 2-29 6. IDE connector (40-1 pin PRI_EIDE) 2-28 7. System panel connector (20-8 pin PANEL) 2-34 8. Serial port connector (10-1 pin COM1) 2-30 9.
2.2.3 Placement direction When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below. 2.2.4 Screw holes Place eight screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1156 socket designed for the Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® processors. 2.3.1 • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components.
3. Lift the load lever in the direction of the arrow until the load plate is completely lifted. Load plate Chapter 2 4. Remove the PnP cap from the CPU socket by lifting the tab only. PnP cap Cap tab 5. Position the CPU over the socket, ensuring that the gold triangle is on the bottom‑left corner of the socket, and then fit the socket alignment keys into the CPU notches. The CPU fits in only one correct orientation.
6. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer. Some heatsinks come with preapplied thermal paste. If so, skip this step. 7. Close the load plate (A), and then push down the load lever (B), ensuring that the front edge of the load plate slides under the retention lock (C). Chapter 2 The Thermal Interface Material is toxic and inedible. DO NOT eat it.
2.3.2 Installing the CPU heatsink and fan The Intel® LGA1156 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. • When you buy a boxed Intel® processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, ensure that you use only Intel®‑certified multi‑directional heatsink and fan. • Your Intel® LGA1156 heatsink and fan assembly comes in a push-pin design and requires no tool to install.
Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. Chapter 2 3. DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. 2.3.3 Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. 2. 3. 4. Disconnect the CPU fan cable from the connector on the motherboard. Rotate each fastener counterclockwise.
2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 3 (DDR3) Dual In-line Memory Modules (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption.
2.4.2 Memory configurations • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Due to Intel spec definition, X.M.P. DIMMs and DDR3-1600 are supported for one DIMM per channel only. • According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU.
P7H55D-M PRO Motherboard Qualified Vendors Lists (QVL) DDR3-2133MHz capability for Intel CPU without integrated GPU (Lynnfield) Vendor Part No. Size SS/DS GEIL GE34GB2133C9DC(XMP) 4GB(2 x 2GB) DS Chip Brand Chip NO. Timing Voltage - - 9-9-9-28 1.65 DIMM socket support (Optional) A* B* • C* • P7H55D-M PRO Motherboard Qualified Vendors Lists (QVL) DDR3-2000MHz capability for Intel CPU without integrated GPU (Lynnfield) Vendor Part No.
P7H55D-M PRO Motherboard Qualified Vendors Lists (QVL) DDR3-1600MHz capability for Intel CPU without integrated GPU (Lynnfield) Vendor Part No. Size Patriot PVT33G1600ELK 3GB(3 x 1GB) SS - Team BoxP/N:TXD34096M1600HC6DC-L 4GB(2 x 2GB) DS (TXD32048M1600HC6-L)(XMP) - PATRIOT PGS34G1600LLKA Timing Voltage - 9-9-9-24 1.65 DIMM socket support (Optional) A* B* C* • • • • • - 6-7-6-18 1.65 • • • SS/DS Chip Brand Chip NO. 4GB(2 x 2GB) DS - - 7-7-7-20 1.
P7H55D-M PRO Motherboard Qualified Vendors Lists (QVL) DDR3-1333MHz capability for Intel CPU without integrated GPU (Lynnfield) Vendor Part No. Size SS/DS Chip Brand Chip NO. Timing A-DATA AD3133301GOU 1GB SS A-DATA AD30908C8D-15IG - A-DATA AD3U1333B2G9-2 2GB DS A-DATA AD30908C8D-15IG - A-DATA CORSAIR CORSAIR Crucial Crucial ELPIDA ELPIDA G.SKILL G.
P7H55D-M PRO Motherboard Qualified Vendors Lists (QVL) DDR3-1333MHz capability for Intel CPU with integrated GPU (Clarkdale) Vendor Part No. Size SS/ Chip Brand Chip NO. DS Timing Dimm(Bios) Voltage Crucial CT12864BA1339.8FF 1GB SS MICRON D9KPT 9 - DIMM socket support (Optional) A* B* C* • • • • • Crucial CT12872BA1339.9FF 1GB SS MICRON D9KPT(ECC) 9 - • • Crucial CT25664BA1339.16FF 2GB DS MICRON D9KPT 9 - • • Crucial Crucial Crucial Crucial ELPIDA CT12864BA1339.
P7H55D-M PRO Motherboard Qualified Vendors Lists (QVL) DDR3-1333MHz capability for Intel CPU with integrated GPU (Clarkdale) Vendor Part No. Size SS/ Chip Brand Chip NO.
P7H55D-M PRO Motherboard Qualified Vendors Lists (QVL) DDR3-1067MHz capability for Intel CPU with integrated GPU (Clarkdale) Part No. Size SS/ Chip Brand Chip NO. DS Timing Dimm(Bios) Voltage Crucial CT12864BA1067.8FF 1GB SS MICRON D9KPT 7 - Crucial CT12872BA1067.9FF 1GB SS MICRON D9KPT(ECC) 7 - Crucial Crucial Crucial Crucial ELPIDA ELPIDA ELPIDA ELPIDA ELPIDA Hynix Hynix Hynix Hynix CT12864BA1067.8SFD CT25664BA1067.16FF CT25664BA1067.16SFD CT25672BA1067.
2.4.3 Installing a DIMM Ensure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. 1. 2. Unlock a DIMM socket by pressing the retaining clip outward. DIMM notch Align a DIMM on the socket such that the notch on the DIMM matches the DIMM slot key on the socket. 1 2 DIMM slot key Unlocked retaining clip Chapter 2 A DIMM is keyed with a notch so that it fits in only one direction.
2.5 Expansion slots In the future, you may need to install expansion cards. The following subsections describe the slots and the expansion cards that they support. Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 2.5.1 Installing an expansion card To install an expansion card 2. 3. 4. 5. 6.
2.5.
2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. Refer to the figure below for the location of the slot. 2.5.5 PCI Express 2.0 x1 slot This motherboard supports PCI Express 2.0 x1 network cards, SCSI cards and other cards that comply with the PCI Express specifications. Refer to the figure below for the location of the slot. 2.5.6 PCI Express 2.0 x16 slot Chapter 2 This motherboard has one PCI Express 2.
2.6 Jumper Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. Chapter 2 To erase the RTC RAM 1. 2. 3. 4. Turn OFF the computer and unplug the power cord. Move the jumper cap from pins 1-2 (default) to pins 2-3.
Connectors 2.7.1 Rear panel connectors Chapter 2 2.7 Rear panel connectors 1. PS/2 keyboard port (purple) 6. HDMI out port*** 2. Optical S/PDIF Out port 7. DVI-D out port 3. VGA out port 8. USB 2.0 ports 3 and 4 4. LAN (RJ-45) port 9. USB 2.0 ports 1 and 2 5. USB 2.0 ports 5 and 6 10. Audio I/O ports** *and **: Refer to the tables on the next page for LAN port and audio port definitions.
*LAN port LED indications ACT/LINK LED Activity Link LED Speed LED Status Description Status Description OFF No link OFF 10 Mbps connection ORANGE Linked ORANGE 100 Mbps connection BLINKING Data activity GREEN 1 Gbps connection SPEED LED LAN port ** Audio 2, 4, 6, or 8-channel configuration Port Chapter 2 2-24 Headset 2-channel 4-channel 6-channel 8-channel Light Blue Line In Line In Line In Line In Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink
Troubleshooting on monitor overscan / underscan problem 1. 2. Install Intel Graphics Accelerator Driver from the motherboard support DVD. From the Windows® notification area, double-click the Intel(R) Graphics Media Accelerator Driver icon and click Graphics Properties. Click Display > General Settings and select a Resolution. Click Apply. 4. Or you can click Display > General Settings > Scaling > Customize Aspect Ratio. Move the Horizontal Scaling and Vertical Scaling sliders and then click Apply.
2.7.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Chapter 2 Connect to Stereo / 2.
Connect to 4.1-channel Speakers Chapter 2 Connect to 5.1-channel Speakers Connect to 7.
2.7.3 1. Internal connectors IDE connector (40-1 pin PRI_IDE) The onboard IDE connector is for the Ultra DMA 133/100 signal cable. There are three connectors on each Ultra DMA 133/100 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then select one of the following modes to configure your device.
Intel® H55 Serial ATA connectors (7-pin SATA 1-6) These connectors connect to Serial ATA hard disk drives and optical disc drives via Serial ATA signal cables. Chapter 2 2. You must install Windows® XP Service Pack 2 or later versions before using Serial ATA hard disk drives.
3. USB connectors (10-1 pin USB78; USB910; USB1112) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. Chapter 2 Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB module is purchased separately. 4.
5. CPU, chassis, and power fan connectors (4-pin CPU_FAN; 4-pin CHA_FAN1; 3-pin PWR_FAN) Chapter 2 Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components.
6. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. Chapter 2 The S/PDIF module is purchased separately. 7. 2-32 Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard.
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W.
9. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. Chapter 2 • 2-34 System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
2.8 Starting up for the first time 1. After making all the connections, replace the system case cover. 3. Connect the power cord to the power connector at the back of the system chassis. 2. 4. 5. Be sure that all switches are off. Connect the power cord to a power outlet that is equipped with a surge protector. Turn on the devices in the following order: a. Monitor c. System power b. 6.
Chapter 2 2-36 Chapter 2: Hardware information
Chapter 3 Chapter 3: 3.1 Knowing BIOS BIOS setup BIOS (Basic Input and Output System) stores system hardware settings such as storage device configuration, overclocking settings, advanced power management, and boot device configuration that are needed for system startup in the motherboard CMOS. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimum performance.
3.2.1 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. The ASUS Update utility allows you to: • Save the current BIOS file • Update the BIOS from an updated BIOS file • • • Download the latest BIOS file from the Internet Update the BIOS directly from the Internet View the BIOS version information This utility is available in the support DVD that comes with the motherboard package.
3. Select the ASUS FTP site nearest you to avoid network traffic, or click Auto Select. Click Next. 4. From the FTP site, select the BIOS version that you wish to download. Click Next. 5. Follow the onscreen instructions to complete the update process. The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 2.
3.2.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www. asus.com. To update the BIOS using EZ Flash 2 1. Insert the USB flash disk that contains the latest BIOS file to the USB port, and then launch EZ Flash 2 in any of these two ways: • • Press + during POST. Enter the BIOS setup program.
3.2.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at support.asus.
3.2.4 ASUS BIOS Updater The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process. The succeeding utility screens are for reference only. The actual utility screen displays may not be same as shown. Before updating BIOS 1. 2. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition.
Backing up the current BIOS To backup the current BIOS file using the BIOS Updater Ensure that the USB flash drive is not write-protected and has enough free space to save the file. 1. At the FreeDOS prompt, type bupdater /o[filename] and press . D:\>bupdater /oOLDBIOS1.rom Filename Extension The [filename] is any user-assigned filename with no more than eight alphanumeric characters for the filename and three alphanumeric characters for the extension. 2.
Updating the BIOS file To update the BIOS file using BIOS Updater 1. At the FreeDOS prompt, type bupdater /pc /g and press . D:\>bupdater /pc /g 2. The BIOS Updater screen appears as below. ASUSTek BIOS Updater for DOS V1.00b [09/06/22] FLASH TYPE: MXIC 25L1605A Current ROM BOARD: P7H55D-M PRO VER: 0113 DATE: 11/03/2009 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: A:\ P7H55PRO.ROM A: Note [Enter] Select or Load [Up/Down/Home/End] Move 3.
3.3 BIOS setup program A BIOS Setup program is provided for BIOS item modification. When you start up the computer, the system provides you with the opportunity to run this program. Press during the Power-On Self-Test (POST) to enter the Setup utility. Otherwise, POST continues with its test routines. If you wish to enter Setup after POST, restart the system by pressing + + , or by pressing the reset button on the system chassis.
3.3.3 Navigation keys At the bottom right corner of a menu screen are the navigation keys for that particular menu. Use the navigation keys to select items in the menu and change the settings. The navigation keys may differ from one screen to another. 3.3.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items. 3.
3.4 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. You can also set the system time and date and BIOS language in this menu. Refer to 3.3.1 BIOS menu screen for information on the menu screen items and how to navigate through them.
Type [Auto] Allows you to select the type of SATA drive installed. [Not Installed] [Auto] [CDROM] [ARMD] Select this option if no SATA drive is installed. Allows automatic selection of the appropriate SATA device type. Select this option if you are specifically configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive. LBA/Large Mode [Auto] Enables or disables the LBA (Logical Block Addressing) mode.
3.4.2 Storage Configuration The Storage Configuration menu allows you to configure your storage devices. Select an item then press to display the submenu. Main BIOS SETUP UTILITY Storage Configuration SATA Configuration Configure SATA as [Enhanced] [IDE] Hard Disk Write Protect IDE Detect Time Out (Sec) [Disabled] [35] SATA Configuration [Enhanced] Configuration options: [Disabled] [Compatible] [Enhanced] Configure SATA as [IDE] Allows you to set the SATA configuration.
3.4.3 AHCI Configuration This menu is the section for AHCI configuration. It appears only when you set the item Configure SATA as from the submenu of SATA Configuration to [AHCI]. BIOS SETUP UTILITY Main AHCI Settings SATA SATA SATA SATA SATA SATA Port1 Port2 Port3 Port4 Port5 Port6 [Not [Not [Not [Not [Not [Not Detected] Detected] Detected] Detected] Detected] Detected] SATA Port1–6 [XXXX] Displays the status of auto-detection of SATA devices.
3.5 Ai Tweaker menu The Ai Tweaker menu items allow you to configure overclocking-related items. Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this chapter vary depending on the CPU and DIMM model you installed on the motherboard.
DRAM O.C. Profile [DDR3-1600MHz] This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and allows you to select a DRAM O.C. profile, which applies different settings to DRAM frequency, DRAM timing and DRAM voltage. Configuration options: [DDR3-1600MHz] [DDR3-1800MHz] [DDR3-1866MHz] [DDR3-2000MHz] [DDR3-2133MHz] [DDR3-2200MHz] DRAM Frequency (MHz) Lynnfield CPU Frequency (GHz) Clarkdale CPU Frequency (GHz) 2.66 2.8 2.93 2.8 Others 1333 Auto Auto Auto D.O.C.P.
3.5.5 Xtreme Phase Full Power Mode [Auto] [Auto] [Enabled] Automatic configuration. Enables Full Power Mode to ensure the best CPU overclocking performance. The following two items appear only when you set the Ai Overclock Tuner item to [Manual], [D.O.C.P.] or [X.M.P.]. BCLK Frequency [XXX] Allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys to adjust the value. You can also type the desired value using the numeric keypad. The values range from 80 to 500.
DRAM CAS# Latency [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [10 DRAM Clock] [11 DRAM Clock] DRAM RAS# to CAS# Delay [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [14 DRAM Clock] [15 DRAM Clock] DRAM RAS# PRE Time [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [14 DRAM Clock] [15 DRAM Clock] DRAM RAS# ACT Time [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [30 DRAM Clock] [31 DRAM Clock] DRAM RAS# to RAS# Delay [Aut
DRAM WRITE to WRITE Delay(DR) [Auto] Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock] DRAM WRITE to WRITE Delay(SR) [Auto] Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock] 3.5.9 CPU Differential Amplitude [Auto] Different AMP might enhance BCLK overclocking ability. Configuration options: [Auto] [700mV] [800mV] [900mV] [1000mV] 3.5.10 CPU Clock Skew [Auto] Adjusting this item may help enhancing BCLK overclocking ability.
3.5.13 DRAM Voltage [Auto] Allows you to set the DRAM voltage. The values range from 1.2V to 2.20V with a 0.10V interval. According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU. 3.5.14 CPU PLL Voltage [Auto] Allows you to set the CPU PLL voltage. The values range from 1.8V to 2.15V with a 0.05V interval. 3.5.15 PCH Voltage [Auto] Allows you to set the Platform Controller Hub voltage. The values range from 1.05V to 1.40V with a 0.05V interval.
3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Main Ai Tweaker BIOS SETUP UTILITY Advanced Power Boot CPU Configuration Uncore Configuration Onboard Devices Configuration USB Configuration PCIPnP Intel VT-d Tools Exit Configure CPU.
CPU Ratio Setting [Auto] Allows you to adjust the ratio between CPU Core Clock and BCLK Frequency. Use the <+> and <-> keys to adjust the value. The valid value ranges differently according to your CPU model. C1E Support [Enabled] [Enabled] [Disabled] Enables the C1E support function. This item should be enabled in order to enable the Enhanced Halt Sate. Disables this function. Hardware Prefetcher [Enabled] [Enabled] [Disabled] Enables the Hardware Prefetcher function.
Active Processor Cores [All] [All] [1] [2] Activate all CPU cores in the processor package. Activate only 1 CPU core in the processor package. Activate 2 CPU cores in the processor package. A20M [Disabled] [Enabled] [Disabled] Legacy OSes and APs may need this function enabled. Disables this function. Intel(R) SpeedStep (TM) Tech [Enabled] [Enabled] [Disabled] The CPU speed is controlled by the operating system. The CPU runs at its default speed.
Memory Remap Feature [Enabled] [Disabled] [Enabled] Do not allow remapping of memory. Allows for the segment of system memory that was previously overwritten by PCI devices to be remapped above the total physical memory. Initiate Graphic Adapter [PEG/PCI] Allows you to select which graphics controller to use as the primary boot device.
3.6.3 Onboard Devices Configuration Advanced BIOS SETUP UTILITY Onboard Devices Configuration HDA Controller Front Panel Type SPDIF OUT Mode Setting Realtek LAN LAN Boot ROM J-Micron PATA Controller Serial Port1 Address [Enabled] [HD Audio] [SPDIF] [Enabled] [Disabled] [Enabled] [3F8/IRQ4] Options Enabled Disabled HDA Controller [Enabled] [Enabled] Enables the High Definition Audio Controller. [Disabled] Disables the controller.
3.6.4 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. Advanced BIOS SETUP UTILITY USB Configuration Options Module Version - 2.24.5-13.4 USB Devices Enabled: 2 Hubs USB Functions Legacy USB Support BIOS EHCI Hand-Off Disabled Enabled [Enabled] [Auto] [Enabled] The USB Devices Enabled item shows the auto-detected values. If no USB device is detected, the item shows None.
3.6.5 PCIPnP The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices. Advanced BIOS SETUP UTILITY Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction. Plug And Play O/S NO: lets the BIOS configure all the devices in the system. [No] Plug And Play O/S [No] [Yes] [No] 3.6.6 Intel VT-d [Disabled] Disables the Intel Virtualization Technology for Directed I/O. Enables the Intel Virtualization Technology for Directed I/O.
3.7 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press to display the configuration options. Main Ai Tweaker BIOS SETUP UTILITY Advanced Power Boot Suspend Mode Repost Video on S3 Resume ACPI 2.0 Support ACPI APIC Support EuP Ready [Auto] [No] [Disabled] [Enabled] [Disabled] Tools Exit Select the ACPI state used for System Suspend.
3.7.6 APM Configuration BIOS SETUP UTILITY Power APM Configuration Restore on AC Power Loss Power On By RTC Alarm Power On By External Modems Power On By PCI Devices Power On By PCIE Devices Power On By PS/2 Keyboard [Power Off] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] to select whether or not to restart the system after AC power loss. Restore On AC Power Loss [Power Off] [Power Off] [Power On] [Last State] The system goes into off state after an AC power loss.
[Ctrl-Esc] Allows you to turn on the system by pressing the Ctrl key and Esc key of the PS/2 keyboard. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Allows you to turn on the system by pressing the Power key on the PS/2 keyboard. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. [Power Key] 3.7.
The following items appear only when you set the CPU Fan Profile item to [Manual]. CPU Upper Temperature [70ºC/158ºF] Sets the upper limit of the CPU temperature. Configuration options: [40ºC/104ºF] [50ºC/122ºF] [60ºC/140ºF] [70ºC/158ºF] [80ºC/176ºF] [90ºC/194ºF] CPU Fan Max. Duty Cycle [100%] Sets the maximum CPU fan duty cycle. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle.
3.8 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press to display the submenu. Main Ai Tweaker BIOS SETUP UTILITY Advanced Power Boot Tools Exit Specifies the Boot Device Priority sequence. Boot Settings Boot Device Priority Boot Settings Configuration Security A virtual floppy disk drive (Floppy Drive B: ) may appear when you set the CD-ROM drive as the first boot device.
3.8.2 Boot Settings Configuration BIOS SETUP UTILITY Boot Boot Settings Configuration Quick Boot Full Screen Logo AddOn ROM Display Mode Bootup Num-Lock Wait For ‘F1’ If Error Hit ‘DEL’ Message Display [Enabled] [Enabled] [Force BIOS] [On] [Enabled] [Enabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. Quick Boot [Enabled] [Disabled] When set to [Disabled], BIOS performs all the POST items.
3.8.3 Security The Security menu items allow you to change the system security settings. Select an item then press to display the configuration options. BIOS SETUP UTILITY Boot Security Settings Supervisor Password User Password : Not Installed : Not Installed to change password. again to disable password. Change Supervisor Password Change User Passward Change Supervisor Password Select this item to set or change the supervisor password.
BIOS SETUP UTILITY Boot Security Settings Supervisor Password User Password : Installed : Installed Change Supervisor Password User Access Level Change User Password Clear User Password Password Check to change password. again to disabled password. [Full Access] [Setup] User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. [No Access] Prevents user access to the Setup utility.
3.9 Tools menu The Tools menu items allow you to configure options for special functions. Select an item then press to display the submenu. Main BIOS SETUP UTILITY Advanced Power Boot Ai Tweaker Tools Exit ASUS O.C. Profile AI NET 2 ASUS EZ Flash 2 Express Gate Enter OS Timer Reset User Data [Auto] [10 Seconds] [No] ←→ ↑↓ Enter F1 F10 ESC Select Screen Select Item Go to Sub Screen General Help Save and Exit Exit v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. 3.9.1 ASUS O.C.
ASUSTek O.C. Profile Utility V2.10 Current CMOS BOARD: P7H55D-M PRO VER: 0113 DATE: 11/03/2009 Restore CMOS BOARD: Unknown VER: Unknown DATE: Unknown PATH: A:\ A: Note [Enter] Select or Load [Up/Down/Home/End] Move [V] Drive Info [Esc] Exit • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only.
3.9.4 Express Gate [Auto] Allows you to enable or disable the ASUS Express Gate feature. The ASUS Express Gate feature is a unique instant-on environment that provides quick access to the Internet browser and Skype. Configuration options: [Disabled] [Enabled] [Auto] Enter OS Timer [10 Seconds] Sets countdown duration that the system waits at the Express Gate’s first screen before starting Windows or other installed OS. Choose [Prompt User] to stay at the first screen of Express Gate for user action.
3.10 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Main Ai Tweaker Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults BIOS SETUP UTILITY Advanced Power Boot Tools Exit Exit system setup after saving the changes. F10 key can be used for this operation.
Chapter 3 3-40 Chapter 3: BIOS setup
Chapter 4 Chapter 4: 4.1 Software support Installing an operating system This motherboard supports Windows® XP/ 64-bit XP/ Vista / 64-bit Vista / 7 / 64-bit 7 operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. 4.2 • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information.
4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click the Manual tab. Click ASUS Motherboard Utility Guide from the manual list on the left. 2. The Manual folder of the support DVD appears. Double-click the folder of your selected software.
4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. 4.3.1 ASUS PC Probe II PC Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. PC Probe II senses fan rotations, CPU temperature, and system voltages, among others.
4.3.2 ASUS AI Suite ASUS AI Suite allows you to launch several ASUS utilities easily. Launching AI Suite 1. Install AI Suite from the motherboard support DVD. 2. Launch AI Suite by clicking Start > All Programs > ASUS > AI Suite > AI Suite v1.xx. xx. The AI Suite main window appears. 3. The AI Suite icon appears in the Windows® notification area. If you minimize the application main window, click this icon to restore the window.
4.3.3 ASUS Fan Xpert Asus Fan Xpert allows you to adjust both the CPU and chassis fan speeds according to different ambient temperatures and your PC’s system loading. The various fan profiles offer flexible controls of fan speeds to achieve a quiet and cool system environment. Launching Fan Xpert After installing AI Suite from the motherboard support DVD, launch Fan Xpert by doubleclicking the AI Suite tray icon and then clicking the Fan Xpert button on the AI Suite main window.
4.3.4 ASUS TurboV ASUS TurboV allows you to easily overclock without exiting or rebooting the OS, and set up the best O.C. settings for different scenarios. Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high voltage may damage the CPU permanently, and setting a low voltage may make the system unstable. • For system stability, all changes made in ASUS TurboV will not be saved to BIOS settings and will not be kept on the next system boot.
4.3.5 ASUS GPU Boost ASUS GPU Boost allows you to overclock the integrated GPU voltage and integrated GPU frequency in WIndows® environment and takes effect in real-time without exiting and rebooting the OS. Refer to the CPU documentation before adjusting iGPU voltage settings. Setting a high voltage may damage the iGPU permanently, and setting a low voltage may make the system unstable. • ASUS GPU Boost is available only when you install the GPU Boost driver from the motherboard support DVD.
4.3.6 ASUS Turbo Key ASUS Turbo Key allows the user to turn the PC power button into a physical overclocking button. After the easy setup, Turbo Key can boost performances without interrupting ongoing work or games—with just one touch! Launching ASUS Turbo Key 1. Install ASUS Turbo Key from the motherboard support DVD. 3. Double-click the ASUS Turbo Key icon in the Windows® notification area to launch the Turbo Key user interface. 2. Restart your computer.
4.3.7 ASUS EPU ASUS EPU is an energy-efficient tool that provides you with a total system power-saving solution. It detects the current computer loading and intelligently adjusts the power in real-time. With auto phase switching for components, the EPU automatically provides the most appropriate power usage via intelligent acceleration and overclocking. ASUS EPU provides you with these modes to choose from: • Turbo Mode • Medium Power Saving Mode • High Performance Mode • Max.
4.3.8 ASUS Express Gate ASUS Express Gate is an instant-on environment that gives you quick access to the Internet, Skype, and viewing your pictures. Within a few seconds of powering on your computer, you will be at the Express Gate menu where you can start the web browser, Skype, or other Express Gate applications. Notices about ASUS Express Gate • Ensure to install ASUS Express Gate from the motherboard support DVD before use. • ASUS Express Gate supports SATA devices in IDE mode only.
4.3.9 Realtek® High Definition Audio utility The Realtek® audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer. The software provides Jack-Detection function, S/PDIF Out support, and interrupt capability. The CODEC also includes the Realtek® proprietary UAJ® (Universal Audio Jack) technology for all audio ports, eliminating cable connection errors and giving users plug and play convenience.
Chapter 4 4-12 Chapter 4: Software support
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax E-mail Web site Technical Support Telephone Online support 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 +886-2-2894-3447 +886-2-2890-7798 info@asus.com.tw www.asus.com.tw +86-21-38429911 support.asus.
(510)739-3777/(510)608-4555 800 Corporate Way, Fremont, CA 94539. Asus Computer International Manufacturer: HARKORT STR. 21-23, 40880 RATINGEN P7H55D-M PRO Model name : EN 60950-1:2006 Signature : Date : Representative Person’s Name : Jan. 06, 2010 Steve Chang / President This device complies with part 15 of the FCC Rules.
