| Safety Symbols | Power | Installation | Using and Cleaning | Safety Symbols Make sure to follow the directions below to prevent accidents and damage to the product by using the product correctly. Failure to follow the accompanying directions may lead to serious injury or death. Failure to follow the accompanying directions may lead to serious injury or death. | Safety Symbols | Power | Installation | Using and Cleaning | Power Insert the power plug correctly until it is firmly in place.
Do not connect more than one appliance to a single outlet, as an overheated outlet may cause fire. Do not use force to pull the power cord. z Don't place anything heavy on the power cord, as this may cause electric shock or fire. Make sure to turn the power off and disconnect the power plug from the outlet before moving the product. Make sure to disconnect the connection cables from other devices as well.
When installing the product on a cabinet or shelf, do not let the front end of the product project beyond its front edge. z Failing to do so, may cause the product to fall, resulting in a product malfunction or personal injury. Do not place the power cord near a heater, as the power cord may melt, causing electric shock or fire. Do not install the product in a location exposed to oil, smoke, moisture, water, or rainwater, or in a car.
Do not insert any metal objects such as chopsticks, wire, or gimlets, or flammable items such as paper or matches into the terminals at the back of the product, as this may cause electric shock or fire. z If water or any foreign substance enters the product, make sure to turn the product off disconnect the power plug from the outlet, and contact a service center. Never disassemble, repair, or modify the product yourself. z If you need to repair your product, contact a service center.
If the product has been dropped or the product casing is damaged, turn it off and disconnect the power plug. z Using the product without verifying that it has not been damaged may cause electric shock or fire. Please contact a service center.
| Features | Components | Front | Back | Side (Buttons) | Side | Features Image display solutions through networking You can view digital images without turning on your PC or printing out images. Images stored by a web content provider such as Server are transmitted to your digital photo frame via a network. (Server provides inter operability allowing you to send photos from your cell phone or photos on a web site to your digital photo frame via a photo (mms) mail.
Digital Photo Frame (Colors may differ for each product.
CF card | Features | Components | SD/MMC card Front | Back | Side (Buttons) | Side | | Side | Front Power Shows the power status. Indicator When the product is powered on, the power light turns on.
POWER Connect the power adapter to this jack. Connect the power cord to the power terminal of the power adapter. LAN If your digital photo frame is connected to a Server site via the LAN, you can download its contents to your digital photo frame. USB Connect a PC or an external device using a USB cable. Up stream Connect your digital photo frame to a PC's USB terminal with terminal a USB cable.
[ ] Power Button [MENU] Menu Button Displays the menu at the center bottom of the screen. [ ] Brightness Button Adjusts the brightness when displaying photos or playing movies. [ ] Up Button Moves the selected frame in the menu up. [ ] Left Button Moves the selected frame in the menu to the left. [ ] Right Button Moves the selected frame in the menu to the right. [VOL] Volume Button Adjusts the sound volume when playing music files or movies.
Memory Card You can insert a CF card or SD/MMC card into this slot to view and use the content stored on Slot them. Open the cover using the groove marked OPEN and insert a card. CF CARD You can insert a CF card into this slot to view and use the contents stored on it. You cannot use a CF card that is not properly formatted. SD /MMC You can insert a SD/MMC card into this slot to view and use the CARD contents stored on it. SD/MMC cards bigger than 2-GB are not supported.
| Power | LAN | Wireless LAN | USB | Memory Card | | USB | Memory Card | Connecting the Power Connect the power adapter to the POWER terminal at the back of the product. Connect the power cord to the power adapter. If all cables are connected, insert the power plug into a 220V outlet. Press the button at the right of the product to turn the product on.
First connect a LAN cable before turning the product on. Connect a LAN cable which is connected to a network to the LAN port. For information on how to use content services, contact the Server administrator. If your internet service is normal but you cannot connect to Server, contact a service center so that a service engineer visits your home to solve the problem. For other problems, you need to visit a Samsung service center.
First, check whether the IP address for the access point is fixed or dynamically allocated. Then configure the settings in the Settings > Network > IP Settings menu of your digital photo frame. z When an authentication process (ESSID) is configured at the access point: { Save your ID and password to your digital photo frame. 1. On your PC, run Notepad and write down your ID and password as shown in the figure below, and save it as 'essid.txt'. 2.
Connect to the up stream terminal of your digital photo frame. Connect the USB terminal of your PC. | Power | LAN | Wireless LAN | USB | Memory Card Connecting a Memory Card CF CARD Slide the card into in the direction marked on the top of the card. To remove a memory card, press the button at the top of the card slot. SD/MMC Slide the card in the direction marked on the top of the card.
| Direct button | | | | Direct button MENU The menu is automatically hidden after one minute. Button MENU (MENU button) (Up button) Description Shows the menu at the bottom center of the screen. Pressing the menu button releases the Volume/Brightness mode.
Button (Up button) Description Action/Stop Moves the selected frame on the menu up. Operating During Playback Position Menu (Bottom) Thumbnail Volume Up Play Mode (when the volume adjustment window is displayed) Brightness Up Moves up.
Button Description Action/Stop Moves the selected frame on the menu to the left. (Left button) (Right button) Button (Right button) Description Action/Stop Moves the selected frame on the menu to the right.
(Select / Slide Show button) Operating Position Play Mode Operating Position Sub menu of Basic operation Selects a file to play back or a setting on the menu. During Playback Shows/Hides the list of thumbnails at the bottom. Menu Select and play Shows/Hides the list of thumbnails, or Select Contents List (Bottom) Thumbnail select a thumbnail.
List Shows on the screen Server Internal Memory Connected Storage Media SD / MMC CF USB Connected Storage Shows the selected file in an amber frame. If there are no supported files on the connected media, "No Contents Available." is displayed. Loads the contents onto the Server. Loads the contents stored in the Internal Memory. Loads the contents stored on a SD/MMC card. Loads the contents stored on a CF card. Loads the contents stored on the media connected via USB port.
If Repeat One is selected for Play Mode, only tiling effect is given Play Mode during playback. Repeat All , Random, Repeat One Information Display - Displays product status and other information Info. Display you select. Play Mode, BG Music, Number of Files, Server Cond., Date & Time, File Location Auto Play - Select whether to playback the Server contents automatically or not Play the content automatically.
Play Play the file. Stop Return to the first of the slide show. Previous File Play the previous file in the contents list. Next File Play the next file in the contents list. | Direct button MENU | | | | : Stops the file being played back MP3 OSD Description Mode Select a mode among Repeat All, Random, and Repeat One. Save Save the file being played back in the selected location. Delete Info Action/Stop Delete the file being played back.
Save Delete Info. Save the file being displayed in the selected location. Delete the file being displayed. Show the information on the file being displayed. Movie OSD Description Mode Select a mode among Repeat All, Random, and Repeat One. Save Save the file being played back in the selected location. Delete Info. Delete the file being played back. Show the information on the file being played back.
I want to use content using multiple connections. I want to set multiple times. I want to move to other screens. I want to display other information including the time while my digital photo frame is turned on. I want to update firmware. I want to connect to a monitor by using MINI-MO program. I want to use content using multiple connections.
automatically. Loading the contents from a memory card may take some time. To remove a memory card, press the button at the top of the card slot. Using Memory with a Card Adapter Only applicable to memory supported by the CF card adapter or SD card adapter. No guarantee is supported for memory cards and adapters other than CF, SD, MMC, and USB. Insert a memory card such as T-flash or Mini SD into the slot of the CF card adapter or SD card adapter.
Move to a file using the , buttons and select it using the button. I want to display other information including the time while my digital photo frame is turned on. Configuring the Information to Display Select the Setup of . Select Show Info.. Select all items you want to display from among the Play Mode, BG Music, Number of Files, Server Cond., Date & Time and File Location. I want to update firmware. Preparations Digital Photo Frame Firmware update file.
MINI-MO is a function that enables the Digital Photo Frame to be operated as the Secondary Monitor.
Find the directory installed above to connect when the Digital Photo Frame Driver is requested. The Driver is installed automatically and a tray icon(Frame Manager) as shown below will appear at the system tray. When the Mass Storage or the MINI-MO is selected, the pertinent function will be run. A screen appears to select between the Mass Storage and the MINI-MO by right-clicking the mouse on the tray icon(Frame Manager) of the Windows.
| System Requirements | Installation | Installing USB driver | Setting up the MINI-Monitor | System Requirements z z z OS : Windows XP SP2 USB : Extended Host Controller (EHCT) for USB 2.0 RAM : 256 MB or above | System Requirements | Installation | Installing USB driver | Setting up the MINI-Monitor Installation Install the Application first before connecting the Digital Photo Frame to a PC. To Install the Frame Manager Software and USB Secondary Display 1.
4. Press "Install" button to proceed. 5. Press "Yes" Button.
6. Select "Yes, I want to restart my computer now" to boot the system. Click on "Finish" button.
| System Requirements | Installation | Installing USB driver | Setting up the MINI-Monitor Installing USB driver Now Switch on the device (Samsung Digital Photo Player) and connect the USB cable (provided in the box with the unit) to the PC. 1. Connect the larger "standard USB" connector to the USB port of the PC. Connect the smaller "mini-USB" connector to the "PC" connector of the Samsung Digital Photo Fame. 2. Select "No, not this time" button. 3. Click on "Next" button.
4. Select "Install from a list of specific location (Advanced)". Click on Next button. 5. Select "Search for the best driver in these locations" option.
Now click on "Browse" button to select the directory where the Frame Manger software is installed. (Refer to Frame Manager Installation step 3). 6. Now press "Next" button. 7. Press "Continue Anyway" button. 8. Press "Finish" button.
9. Now the system is ready to be used. | System Requirements | Installation | Installing USB driver Setting up the MINI-Monitor When the PC is restarted the Frame Manager icon will appear in system tray. 1. To use the Samsung Digital Photo Frame as USB Secondary Display Go to Control Panel -> Display -> Settings ->Select Samsung MiniMonitor Display Card.
NOTE : Never make this as primary monitor. 2. Press "Ok" or "Apply".
The Default Mode of the Samsung Digital Photo Frame is Album. To use the Photo Frame as USB Secondary Monitor or USB Mass-Storage follow the below instructions. How To Use Digital Photo Frame As MINI-MO If USB cable is not connected, and Photo Frame is switched on, it starts working as Album. To use the Samsung Digital Photo Frame device as USB Secondary Monitor, First install the Frame Manager on the Windows XP PC. (Follow the Frame Manager Installation guide for installation).
How To Use Digital Photo Frame As Mass Storage If USB cable is connected to PC, Disconnect and connect again. Following screen will be shown on Digital Photo Frame. Select Mass-Storage option by clicking the button. Use up-down (button 4 and button 6 in above figure) button on device for selection and by pressing menu button (button 3 in above figure) on device. A dialog box (Windows Default) dialog will appear and you can open the folder. How to switch current mode to another 1.
2. From the Menu, Click on menu item MINI-MO. 3. Rotate to 90 in MINI-MO Mode When the device is in MINI-MO mode 0 Degree, select "Rotate to 90°" to rotate the display by 90 degrees. 4. Rotate to 0 in MINI-MO Mode When the device is in MINI-MO mode 90 Degree, select "Landscape" to rotate the display back to normal 0 degrees position. Brightness Control To control the brightness in MiniMo Mode (i.e.
Press Home Key on keyboard To Minimize the brightness Press End Key on keyboard To Close Frame Manager application Click on Exit menu item.
9. 10. During the transfer of file/files, following progress bas will appear. After this please wait for completion of update on device.
| Specifications | Supported Files Specifications Items Specifications Type 7" TFT Resolution 800 x 480 Brightness 360 cd/m2 Contrast Ratio 300 : 1 View Angle 40/60/60/60 (Up-Down/Right-Left) Interface 6-bit Panel Supported Formats JPEG, MPEG4, WMV9 Built-in Memory 128 MB Wired 10/100 Ethernet Network Wireless Sound An external USB device that supports wireless connection (3Com 3CRUSB10075, ASUS WL-167g) 1 W x 1 built-in speaker Version 2.
Music File MP3 Movie File MPEG4, WMV9 User authentication, Networking Adjustment IP Setting, Service Registration, Receiving and moving images and movies from/to the server Networking Information on screen Size, File info, Status info I/O Device Key (7 keys, 2-dimensional searching) Memory Card MPV-based/Predefined Local Policy File Management Copying photo files The product design may differ according to the model, and specifications are subject to change without prior notice for product per
| Troubleshooting | Terminology | Service Centers | Troubleshooting This section lists various problems and solutions encountered by users while using the digital photo frame. When encountering a problem, first check the list below and follow the suggested action if one matches your problem. If the problem still persists, contact or visit the nearest service center. Symptoms My Digital Photo Frame does not turn on.
is operating normally. (Please contact a Server service center.) Check the cable connection between the product and the external device. I have connected an external device (USB Check whether the external device works as a standalone, and check the memory device or MP3 player), but it format of the files stored on it. does not work. Only USB devices supporting Linux 2.6.x. can be supported. Please check that your USB device supports Linux 2.6.x.
high stability and high capacity. It is widely used in various digital products SD Card such as PDAs, digital cameras, MP3 players, cell phones, and notebook PCs. Its (Secure Digital Card) appearance is similar to that of MMC, but the number of pins and their thickness is different. It also has a password setting function for data security. MMC is external Flash memory used for small mobile devices, as in the case of MMC the SD card.
Latin America ARGENTINE 0800-333-3733 http://www.samsung.com/ar BRAZIL 4004-0000 http://www.samsung.com/br CHILE 800-726-7864 (SAMSUNG) http://www.samsung.com/cl COLOMBIA 01-8000112112 http://www.samsung.com.co COSTA RICA 0-800-507-7267 http://www.samsung.com/latin ECUADOR 1-800-10-7267 http://www.samsung.com/latin EL SALVADOR 800-6225 http://www.samsung.com/latin GUATEMALA 1-800-299-0013 http://www.samsung.com/latin JAMAICA 1-800-234-7267 http://www.samsung.
CIS ESTONIA 800-7267 http://www.samsung.ee LATVIA 800-7267 http://www.samsung.com/lv LITHUANIA 8-800-77777 http://www.samsung.lt KAZAKHSTAN 8 800 080 1188 http://www.samsung.kz RUSSIA 8-800-200-0400 http://www.samsung.ru UKRAINE 8-800-502-0000 http://www.samsung.com/ur UZBEKISTAN 140-1234 http://www.samsung.uz Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 800-810-5858, 010- 6475 1880 http://www.samsung.com.cn HONG KONG 3698-4698 http://www.samsung.
416, Mae tan-3dong, Yeongtong - gu, Suwon City, Gyeonggi-do Korea