COLOUR TELEVISION SP42W4/42W5 SP43T6/43T7/43T8/43W6 SP47Q7/47W1/47W3 SP48T6 SP52Q7 SP54T6/54T8 SP55W3 SP62T6/62T8 SP65W3 Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Important Warranty Information Regarding Television Format Viewing ENG Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving.
Safety Instructions ENG ◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the television to direct sunlight and other sources of heat. ◆ Do not expose the television to any liquids. ◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the television. ◆ During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.
ENG Contents (continued) ◆ FOREWORD ■ ■ ■ Important Warranty Information Regarding Television Format Viewing ........ Safety Instructions ......................................................................................... Caution .......................................................................................................... 2 3 3 ◆ CONNECTING AND PREPARING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Control Panels ..........................................................................
ENG Contents ◆ USING YOUR TELEVISION ■ ■ ■ ■ ■ ■ Setting the External Sound............................................................................ 32 Selecting the Sound Mode (depending on the model) .................................. 33 Setting the Sleep Timer ................................................................................. 34 Setting and Displaying the Current Time....................................................... 34 Switching the Television On and Off Automatically ..........
Control Panels (depending on the model) ➢ ENG The actual configuration on your TV may be different, depending on your model.
Control Panels (depending on the model) ➢ The actual configuration on your TV may be different, depending on your model.
Connection Panels (depending on the model) ➢ ENG The actual configuration on your TV may be different, depending on your model.
Using a Display Deck (depending on the model) ENG You can display a VCR or DVD Player, etc. by using the display deck. SP47W3/55W3/65W3 SP47W3/55W3/65W3 1 Press the symbol “ 2 Hold the center of the door and lift it up in the direction of arrow till a ‘ttok’ sound sounds. 3 After placing a component you have in the display deck, hold the center of the door and pull it down. 4 Shut the door by pressing the symbol “ ” at the center of the display deck. ”.
Infrared Remote Control ENG Power TELEVISION STANDBY TV VCR Cable DVD SET MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CABLE, DVD PLAYER REMOTE CONTROL SETUP NUMERIC BUTTONS FOR DIRECT ACCESS (CHANNEL/TELETEXT PAGE) ONE, TWO, OR THREE-DIGIT CHANNEL SELECTION (DEPENDING ON THE MODEL)/ TELETEXT STORE (OPTION) TV Surround S.STD P.STD S.
Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AA” 1.
Switching Your Television On and Off ENG The mains lead is attached to the rear of your television. ☛ If you have purchased this television in the United Kingdom, refer to page 53 for further instructions on plug wiring. Power TV VCR Cable DVD SET 1 Plug the mains lead into an appropriate socket. 2 Press the “ I ” button (On/Off) on the front of the television. main voltage is indicated on the rear of the television ➣ The and the frequency is 50 or 60Hz.
Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system Power The following table presents the most frequently used buttons and their functions. Button Viewing Function TV VCR Cable DVD SET Menu Function Used to display the next stored channel. P Used to display the previous stored channel. to -/--/--- Used to display the corresponding channels.
Plug and Play Feature ENG When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 English If the television is in Standby mode, press the Power ( ) button on the remote control. Result: Ь А Hrvatski Čeština Netherland Français 2 Select the appropriate language by pressing the ▼ or ▲ button. Press the Menu button to enter the language. Result: ➣ 3 The message Antenna input check is displayed.
Plug and Play Feature ENG If you want to reset this feature... 1 Press the Menu button. Result: 2 The main menu is displayed. Press the ▼ or ▲ button to select Function. Result: The options available in the Function group are displayed. 3 Press the 4 Press the ▼ or ▲ button to select Plug & Play. Press the button. Result: button. This feature starts with the message Plug & Play is displayed.
Viewing the Demonstration ENG Menu Video To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. 1 Press the Menu button. Result: 2 Display The main menu is displayed. Press the ▼ or ▲ button to select Function. P.Size Result: The options available in the Function group are displayed. 3 Press the 4 Press the ▼ or ▲ button to select Demonstration. Press the button. Result: ➣ button. Each of the menu options is displayed in turn.
Adjusting Convergence ENG If the color appears spread out or “smeared” on the screen, the convergence probably needs alignment. Be sure to use the remote control for the convergence adjustments. (The Convergence Adjustment can not be made by using the control buttons on the front panel.) 1 Press the MENU button. Result: 2 The main menu is displayed. Press the ▼ or ▲ button to select Function. Result: The options available in the Function group are displayed.
Storing Channels Automatically ENG You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the Menu button. The main menu is displayed. Result: 2 Press the ▼ or ▲ button to select Channel. The options available in the Channel group are Result: displayed.
Sorting the Stored Channels ENG This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep. 1 Press the Menu button. Result: 2 Press the ▼ or ▲ button to select Channel. Result: 3 4 The main menu is displayed. Press the The options available in the Channel group are displayed. button. Press the ▼ or ▲ button to select Sort. Press the Result: button.
Storing Channels Manually ENG You can store up to 100 television channels, including those received via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify 1 Press the MENU button. Result: 2 Press the ▼ or ▲ button to select Channel. Result: The options available in the Channel group are displayed. 3 Press the 4 Press the ▼ or ▲ button to select Manual Store.
Storing Channels Manually (continued) ENG 7 If you know the number of the channel to be stored, see the following steps. ◆ Press the ▼ or ▲ button to select Channel. ◆ Press the ❿ button. ◆ Press the ▼ or ▲ button to select C (Air channel) or S (Cable channel). ◆ Press the ❿ button. ◆ Press the ▼ or ▲ button to select indicate the required number. ➣ 8 If you do not know the channel numbers, select Search by pressing the ▼ or ▲ button. Press the ➛ or ❿ button to start the search.
Assigning Names to Channels ENG Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the Menu button. Result: 2 Press the ▼ or ▲ button to select Channel. Result: 3 4 Press the button. button. The Name menu is displayed with the current channel automatically is selected. If necessary, select the channel to be assigned to a new name by pressing the ▼ or ▲ button. Press the ➛ or ❿ button.
Activating the Child Lock and Skipping Unwanted Channels ENG ◆ Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. ◆ Skipping unwanted channels You can exclude the channels of your choice from the channel scan operation.
Selecting a Channel by Informations ENG You can display the list of stored channels. Display P.Size 1 Press the Info. button. Result: Text/Mix Info. Sleep Perfect Focus PIP ON Scan Swap Locate 2 A list is displayed with the first 13 channels. Two text boxes to the right of the list indicate: ◆ Whether the Teletext feature is available. ◆ Which sound mode is being used. To... Then... Scroll through the stored channels Press the ▼ or ▲ button. Result: The corresponding channel is displayed.
Adjusting the Picture Settings ENG Your television has several settings which allow you to control picture quality. 1 Press the Menu button. The options available in the Picture group are Result: displayed. 2 Press the 3 Press the ▼ or ▲ button to select Adjust. Press the Result: button. button. The options available in the Adjust group are displayed with Color tone is selected. 4 Press the ➛ or ❿ button to select the option (Cool2, Cool1, Normal, Warm1, Warm2).
Extra Picture Settings ENG ◆ Scan Mode You will normally find that scan mode is best set to Natural to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC-M) may benefit by changing the scan mode. Auto, Natural, Digital and Progressive modes are available. ◆ Digital NR If the signal received by your television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen.
Selecting the Picture Size (depending on the model) ENG You can select the picture size which best corresponds to your viewing requirements by pressing the “P.Size” button simply. Depending on the model, the following picture sizes are available: Auto wide Expanding and pulling up the picture from 4:3 to 16:9 ratio. Wide Adjusting the ratio of picture from 4:3 to 16:9. Panorama Adjusting the wide picture to natural size. Zoom1 Enlarging the normal 4:3 picture by 120%. Lifting is available.
Changing the Sound Standard ENG You can select the type of special sound effect to be used when watching a given broadcast. TV Surround P.STD S.STD Mute 1 Press the Menu button. The main menu is displayed. Result: 2 Press the ▼ or ▲ button to select Sound. The options available in the Sound group are Result: displayed. 3 Press the button. The Mode is selected. Result: 4 Select the required sound effect by pressing the ➛ or ❿ button repeatedly.
Adjusting the Volume Automatically ENG Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 1 Press the Menu button. Result: 2 The main menu is displayed. Press the ▼ or ▲ button to select Sound.
Setting the Dolby Digital ENG Rear of the TV This mode allows you enjoy Dolby Pro Logic Surround effect fully with only surround speakers are connected to TV. This allows various modes for the main, center and rear speakers to be selected.
Adjusting Your Dolby Preferences ENG The following Dolby settings can be adjusted to suit your personal preferences. ◆ Volume of the center and rear speakers ◆ Pro Logic delay time for the rear speakers (between 15 and 30 ms) ◆ Activation/deactivation of the test tone to simulate the volume on each speaker 1 Press the Menu button. Result: 2 The main menu is displayed. Press the ▼ or ▲ button to select Sound. Result: The options available in the Sound group are displayed.
Setting the External Sound ENG This feature allows you can adjust to suit your personal preferences when the equipment with output is connected to the television. 1 Press the Menu button. Result: 2 The main menu is displayed. Press the ▼ or ▲ button to select Sound. Result: The options available in the Sound group are displayed. 3 Press the 4 Press the ▼ or ▲ button to select Audio Out. 5 Select the required option (Volume or Standard) by pressing the ➛ or ❿ button button.
Selecting the Sound Mode (depending on the model) ENG The “S.Mode” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission.
Setting the Sleep Timer ENG You can select a time period of between 30 and 180 minutes after the television automatically switches to Standby mode. Display P.Size Text/Mix Info. Sleep Perfect Focus PIP ON Scan Swap 1 Press the Sleep button. Result: The Sleep timer menu is displayed. ◆ If the sleep timer is not yet set, Off is displayed. If the sleep timer is already set, the screen displays the remaining time and then before the television will be placed in standby mode.
Switching the Television On and Off Automatically ENG You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆ Switch off automatically at the time you select ➣ 1 The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on the previous page). Press the MENU button. Result: 2 The main menu is displayed. Press the ▼ or ▲ button to select Function.
Viewing the Picture In Picture (PIP) ENG You can display a sub picture within the main picture of TV program or external A/V devices such as VCR or DVD. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. 1 Press the Menu button. Result: The main menu is displayed. 2 Press the ▼ or ▲ button to select PIP. Press the 3 Press the ➛ or ❿ button again to set On.
Viewing the Picture In Picture (PIP) ENG ☛ Easy functions of remote control Buttons Feature PIP ON Used to activate or deactivate the PIP function directly. Scan Used to scan every memorized channel in order. To stop scanning, press it again. Swap Used to interchange the main picture and the sub picture. the main picture is in the Video mode ➣ When and the sub picture is in the TV mode, you Display P.Size Text/Mix Info.
Teletext Feature ENG Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information.
Displaying the Teletext Information ENG You can display Teletext information at any time on your television. Teletext information to be displayed correctly, ☛ For channel reception must be stable; otherwise: ◆ Information may be missing TV Surround P.STD S.STD S.Mode ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service using the P or P button. 2 Press the Text/Mix button to activate the teletext mode. The contents page is displayed.
Selecting Display Options ENG Surround P.STD S.STD S.Mode When you have displayed a Teletext page, you can select various options to suit your requirements. To display... Mute Still VOL P Menu Video Display P.Size Text/Mix Info.
Selecting a Teletext Page ENG You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: 2 The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the (hold). Press the it again to resume.
Connecting to the External Input/Outputs ENG ➢ EXT1 is used for the equipment with an RGB output, such as video game devices or video disc players.
Connecting to the Audio Output ENG ➢ The AUDIO OUT RCA connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect). Rear of the TV Audio system Connecting to the RCA Input (depending on the model) ➢ The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders, video disc players, and some video game devices.
Connecting to the S-Video Input (depending on the model) ENG ➢ The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV ① Camcorder and Front of the TV ① and ① To play pictures and sound, both the S-VIDEO and RCA connectors must be used. Connecting Additional Speakers To take advantage of the surround sound system, connect additional speakers.
Viewing Pictures From External Sources ENG Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. TV Surround 1 Check that all the necessary connections have been made. 2 Switch your television on, then press the VIDEO button repeatedly. Result: ➣ ➣ The input sources are displayed in the following order: TV - EXT1 - EXT2 - EXT3 - EXT4 - S-Video. P.STD S.STD Mute S.
Redirecting an Input to the External Output ENG Your television enables you to choose which audio/video signals are output to the external connector. 1 Press the Menu button. Result: 2 Press the ▼ or ▲ button to select Function. Result: The options available in the Function group are displayed. 3 Press the 4 Press the ▼ or ▲ button to select AV Setup. Press the button. Result: button. The options available in the AV Setup group are displayed.
Programming the Remote Control for Other Components ENG This TV’s remote control can operate almost any VCR, Cable box, or DVD, in addition to controlling the TV. ➣ The remote control might not be compatible with the TV manufactured by another company. Power TV 1 Turn off your VCR, Cable box, or DVD. 2 Press the appropriate button among the component selection buttons to activate another component (TV, VCR, Cable, DVD).
Programming the Remote Control for Other Components ENG TV Remote Control Codes A-Mark 88, 37, 90 MTC 26, 15, 6, 49, 93, 20, 8, 75 Admiral 55 NEC 25, 75, 20, 8, 6, 5, 1, 1 20, 6 Nikei 50 Onking 50 Akai 37, 47, 64, 41, 50 Anam Onwa 50 67 Optonica 69 68 Panasonic 6, 37, 20, 56 Aoc Bell & Howell Broksonic 6, 12, 20, 46, 50 Candle Penney 64, 72, 58, 82 61, 6, 49, 66, 18, 90, 50, 77, 25 45 Philco 1, 8, 88, 61, 6, 90, 50, 12, 98, 92, 100, 82, 20 Citizen 20, 46, 6, 50, 12, 90, 45,
Programming the Remote Control for Other Components ENG VCR Remote Control Codes Admiral 15, 88 Aiwa 24 Akai 26, 31, 32 Audio Dynamics 22, 25 MTC Multitech NEC 11 Panasonic Broksonic 19 Pentax Candle 16, 18 ,22, 54, 55, 61 Canon 17, 62 Philco Citizen 16, 18, 22, 54, 55, 61 Philips Craig Curtis-Mathes Daewoo DB 11, 23, 25, 39, 55, 70, 73 15 17, 62, 84, 86 14, 44 55 Pentex Research+ 17, 38, 62, 65 17 23 Pioneer 14, 25, 42, 59 16, 21 Portland 53, 54, 61 9, 16, 17, 23, 24, 55, 6
Programming the Remote Control for Other Components ENG Cable Box (CATV) Remote Control Codes Anvision 15, 16 Pioneer 26, 28, 52 Cable Star 15, 16 Randtek 15, 16 DaeHan 5 RCA 8, 35, 74 DaeRyung 3 Regal 11, 20, 21 4 Regency Dongkuk Eagle 10, 41 15, 16 SAEWOO 7 Eastern International 20 Samsung 0, 11, 30, 52, 71, 72 General Instrument 54 Signature 54 Spruce 35 Starcom 54 GI 12, 13, 23, 31, 32, 33, 38, 44, 75, 76, 77 Hamlim 11, 12, 20, 21, 42, 56 Hitachi 45, 51, 54 Jerr
SCART Connector Wiring (EXT1, EXT2 or EXT3) ENG If you wish to connect other equipment via the SCART connectors on your television, contact your dealer or a qualified technician to wire the A/V cable as illustrated below.
Troubleshooting: Before Contacting Service Personnel ENG Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “ I ” button (On/Off) and the Power ( ) button. ◆ Check the picture contrast and brightness settings.
Wiring the Mains Power Supply Plug (UK Only) ENG IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
Memo ENG 54
Memo ENG 55
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
