High Resolution D/N IR Dome Camera SIR-60 User’s Manual Thank you for purchasing a SAMSUNG Dome CAMERA. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.
Contents Contents Features • Precautions… …………………………………………………………………… 7 • Components and Accessories……………………………………………… 8 • Overview…………………………………………………………………………… 9 • Installation………………………………………………………………………… 10 ■ Installation………………………………………………………………………………… 10… • When using the Ceiling bracket…………………………………………………… 11… ■ Adjust the panning and tilting while watching the monitor… ……………………… 12 • Connection………………………………………………………………………… 13 ■ Connecting To a monitor… …………………………………………………………… 13… ■ Connecting To
Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Precautions Do not install under extreme temperatures. Do not install in high humidity environments.
Overview Precautions Do not expose the camera to radioactivity. Do not use abrasive or opaque substances on the dome cover. ❶ 3 7 If it is exposed to radioactivity, For heated CCD, it will be out of order. May reduce the performance of the camera. 2 4 Notes 5 6 • If the camera is exposed to spotlights or objects reflecting bright light, smearing or blooming may occur. • Please check that the power satisfies the normal specification before connecting the camera.
Installation Installation Installation When using the Ceiling bracket 1) Separate the dome cover by counterclockwise rotation. Ceiling bracket Main Body (Camera) M4 tapping screw (provided) Latch An arrow for installing directions 1) Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of the camera by rotating it counterclockwise.
Connection Installation Adjust the panning and tilting while watching the monitor Connecting to Monitor 75˚ Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. Tilt Base fixation screw 176˚ Monitor Pan Base fixation screw CCTV Camera • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. • Only connect the cable when the power is turned off. • Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.
Connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) Menu Setup #24(0.22mm2) #22(0.33mm2) #20(0.52mm2) #18(0.83mm2) Resistance (Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 Use the Function Setup switch beside of the lens. • As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
Operating Your Camera LENS SHADE LENS SHADE diminishes brightness contrast to obtain balanced view on the monitor. MAIN SETUP 1.LENS SHADE ON 2.EXPOSURE - OFF: LENS SHADE NOT IN USE - ON: LENS SHADE IN USE - HIGH : Allows automatic gain control from 5.3dB to 37dB. SENS-UP : When it is night or dark, the camera automatically detects the light level and maintains a clear picture if this mode is activated. - OFF : Deactivates the SENS-UP function. - AUTO : Activates the SENS-UP function.
Operating Your Camera OUTDOOR : Select this when the color temperature is between 1,700°K and 11,000°K. (sodium light inclusion) AWC→SET : To find the optimal luminance level for the current environment, point the camera towards a sheet of white paper and press the Function Setup switch. If the environment changes, readjust it. MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by using the ATW or AWC mode.
Operating Your Camera SSNR MAIN SETUP 1.LENS SHADE 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SSNR 6.DAY/NIGHT 7.IMAGE ADJ This function reduces the background noise in a low luminance environments. 1. When the SETUP menu screen is displayed, select 'SSNR' by using the Function Setup switch so that the arrow indicates 'SSNR' . MAIN SETUP 1.LENS SHADE ON 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 2. Select a desired mode using the Function Setup switch.
Operating Your Camera Notes IMAGE ADJ. 1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Function Setup switch so that the arrow indicates IMAGE ADJ. MAIN SETUP 1.LENS SHADE ON 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 2. S elect a desired mode using the Function Setup switch. IMAGE SETUP 1. 2. 3. 4. 5.
Operating Your Camera CAM TITLE : If you enter a title, the title will appear on the monitor. If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘CAM TITLE’. Set it to ‘ON’ by using the Function Setup switch. SYNC : I n areas where the supply is at 60Hz, you can synchronize the output phase of multiple cameras using the power synchronization function (Line-Lock) without using a synchronization signal generator.
Operating Your Camera - XPOS : Determines the coordinate of the horizontal axis for SEL POS. - FILL → SET : F ills in a selected MD area. The color of filling is sequentially selected as brown, orange, blue, cyan, yellowish green, yellow, magenta and red. - RETURN : S elect this to save the MOTION DET menu settings and return to the SPECIAL menu. Notes • MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the monitor screen.
Specifications Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. ● Nothing appears on the screen. ▶ Check that the power cord and line connection between the camera and monitor are fixed properly. ▶ Check that you have properly connected VIDEO cable to the camera VIDEO output jack. ● The image on the screen is dim.
Dimension DECLARATION OF CONFORMITY Ø107.6 Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name 83.7mm 5 R4 European Representative Address Equipment Type/Environment CCTV Camera Model Name SIR-60P Beginning Serial NO. C11S3010007 Year of Manufacture 2009. 03.
SALES NETWORK • AMSUNG TECHWIN CO., LTD. S 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si Gyeonggi-do, Korea, 462-703 TEL : +82-31-740-8151~8 FAX : +82-31-740-8145 • AMSUNG TECHWIN AMERICA Inc. S 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com • AMSUNG TECHWIN EUROPE CO., LTD.
