Supreme Image 560TVL, 128x WDR High Resolution WDR V/F Dome Camera SID-560 User’s Manual Thank you for purchasing a SAMSUNG CCD CAMERA. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. SALES NETWORK • SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea TEL : +82-31-740-8132~6 FAX : +82-31-740-8144 • SAMSUNG OPTO-ELECTRONICS UK, LTD.
Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.
Features Ultra High Resolution DIS (Digital Image Stabilizer) By adopting a double-speed 410,000 pixel Sony CCD, the camera produces clear picture quality with a horizontal resolution of 560 TV lines for color, and 700 TV lines for B/W. The DIS function compensates for any camera movement, to produce more stable pictures.
Contents Precautions 8 Components and Accessories 10 Overview 11 Installation 13 Installation Adjust the panning and tilting, rotating while watching the monitor Connection Connecting To Monitor Connecting To Power RS-485 communication control 13 15 Operating Your Camera Menu Configuration Menu Setup LENS EXPOSURE WHITE BALANCE BACKLIGHT SSNR DAY/NIGHT IMAGE ADJ SPECIAL EXIT 19 19 20 21 22 24 26 28 29 30 32 36 16 Troubleshooting 37 16 17 18 Specification 39 Dimension 40
Precautions Do not install the camera in extreme temperature conditions. Do not install or use the camera in an environment where the humidity is high. Only use the camera under conditions where temperatures are between -10˚C and +50˚C. Be especially careful to provide ventilation when operating under high temperatures. It can cause the image quality to be poor. Do not drop the camera or subject them to physical shocks. It can cause malfunctions to occur.
Components and Accessories Overview 1. SID-560 2. Instruction Manual 3. M4 Tapping Screw 4EA 4. M4 Machine Screw 4EA 5. Adapter plate 6.
Overview Installation Pan Base control panning angle of camera Rotate Base control rotating angle of camera X2.5 Vari-focal Lens Module Rotate Base Holding Screw fix rotated position Pan Base Holding Screws (Color : Silver) fix panned position RS-485 Control Cable : The detailed description refers to p18 Power Input Jack Video Output Jack Function Setup Button SET Button : Displays the menu on the screen. Press this button to confirm status or after changing a selected item.
Installation Adjust the panning and tilting, rotating while watching the monitor When installing on a adapter plate An arrow for installing directions adapter plate M4 tapping screw (provided) CAMERA 1) Place the bracket provided on the installation surface and fix it with the M4 tapping screws (provided). (Select either 85X85 or 83.5X46) 2) When placing the camera body on the plate, insert the plate pin into the mounting hole on the body as shown in figure-1 and fix it by turning clockwise.
Connection Connecting to Monitor Connecting to Power Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. CCTV Camera Connect the adaptor to the power input connector as shown in the figure below. The recommended adaptor specification for SID-500N/SID-500P is DC 12V / 500mA. Monitor • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. • If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.
Connection Operating Your Camera RS-485 communication control Menu Configuration Connecting to RS-485 Control Cable Setup Menu LENS CONTROL CABLE RED (TRX+) WHITE(TRX-) SPEC RS-485+ RS-485- EXPOSURE EX) SERIAL PORT OF THE PC(COM1) CONTROL CABLE SERIAL CABLE RS-485 CONVERTER RS-485 (2)The case which it controls from the DVR or System Controller It connects the RS-485 control cable in the connection terminal of 485 control boards which are connected with the DVR or System Controller.
Operating Your Camera Menu Setup Use the five buttons on back of the camera. SET button LEFT RIGHT button button UP button DOWN button 1. Press the SET button. • Main setup menu is displayed on the monitor screen. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT 2. Select a desired function using the Up and Down buttons. • Place the cursor over a desired item.
Operating Your Camera DC : Select Auto Iris Lens • When DC is selected, you can control screen brightness. The range of brightness control is between 1 and 70. Adjust the brightness appropriately for optimal screen brightness. SHUTTER : You can select either auto or manual shutter. - A.FLK : Select this when you experience picture flicker, which can happen when there is a clash with the frequency of the installed lighting. - ESC : Select this to control the shutter speed automatically.
Operating Your Camera RETURN : Select this to save the changes in the EXPOSURE menu and return to the SETUP menu. Notes • If you press the SET button in ‘AUTO’ mode, You can adjust brightness by increasing or decreasing the shutter speed. (X2~X256) • Note that the higher the zoom level, the brighter the screen, but the more likely it is that an after-image will appear. • Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the zoom level is increased, this is normal.
Operating Your Camera BACKLIGHT This camera is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, unlike conventional cameras, by adopting a proprietary SV-IV DSP chip. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Up and Down buttons so that the arrow indicates BACKLIGHT . MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT 3.
Operating Your Camera DAY/NIGHT SSNR This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and Down buttons so that the arrow indicates ’SSNR’ . You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down buttons so that the arrow indicates DAY/NIGHT . MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.
Operating Your Camera EXTERN : This mode allows you to apply a desired filter to external signals. 1. 2. 3. 4. 5. 6. Notes • When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between Color and Black & White may not occur. • You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’. At this time, the exchange between DAY mode and NIGHT mode operates as like selecting ‘COLOR’ mode.
Operating Your Camera Set it to ‘ON’ by using the Left and Right buttons. SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and Down buttons so that the arrow indicates ‘SPECIAL’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT Notes • When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.
Operating Your Camera Enter a title, move the cursor to ’POS’ and press the SET button. The entered title appears on the screen. Select the position to display the title on the screen by using the 4 direction buttons and press the SET button. When the position is determined, select ’END’ and press the SET button to return to the SPECIAL menu. Notes • MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the monitor screen.
Troubleshooting Operating Your Camera COMM ADJ (Communication Adjustment): This function sets up the camera communication status when controlling the camera through an external control device. Refer to the following table if you are experiencing trouble with your camera. Contact an authorized technician if the table does not provide you with a solution to the trouble. Problem When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow indicates ‘COMM ADJ’.
Specifications Troubleshooting Problem SID-560N Solution POWER The Motion Detection function does not work. • Check that MOTION DEF of SPECIAL SETUP menu is ‘OFF’. Color is not correct. • Check the setting of WHITE BAL SETUP menu . The screen flickers continually. • Check that direction of camera turns toward the Sun . RS-485 communication fails. • Check the polarity between RS-485 Control Port and RS-485 cable.
DECLARATION OF CONFORMITY Dimension Ø141.2 Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name 105.5mm R4 8 European Representative Address Equipment Type/Environment CCTV Camera Model Name SID-560 Beginning Serial NO. S712001 Year of Manufacture 2007. 12.
MEMO